• 인지과학
• /
• 제10권4호
• /
• pp.51-62
• /
• 1999

본 논문에서는 규칙기반 전문가시스템의 퍼지 생성규칙을 표현할 수 있는 퍼지페트리네트 표현을 제안한다. 퍼지페트리네트 표현을 기반으로, 전진추론 알고리즘과 후진추론 알고리즘으로 구성된 퍼지 추론 알고리즘을 제안한다. 본 논문이 제안한 알고리즘은 단순히 min과 max 계산만을 하는 기존의 알고리즘과는 달리 퍼지 생성규칙의 전제 부와 결론 부에 퍼지 개념의 유무에 따라 적절한 믿음 값 평가 함수을 사용하여 보다 더 인간적인 추론을 한다. 전진추론 알고리즘은 유한한 방향성 나무인 도달나무로 표현할 수 있다. 후진추론 알고리즘은 목표노드에서 시작노드까지의 후진추론 통로를 구한 후에 믿음 값 평가함수를 이용하여 목표노드의 믿음 값을 구한다.

• Journal of Mechanical Science and Technology
• /
• 제18권11호
• /
• pp.1923-1931
• /
• 2004

Manufacturing of complex surface plates in stern and stem is a major factor in cost of a preliminary ship design by computing process. If these hull plate parts are effectively classified, it helps to compute the processing cost and find the way to cut-down the processing cost. This paper presents a new method to classify surface plates effectively in the preliminary ship design using neural network. A neural-network-based ship hull plate classification program was developed and tested for the automatic classification of ship design. The input variables are regarded as Gaussian curvature distributions on the plate. Various applicable rules of network topology are applied in the ship design. In automation of hull plate classification, two different numbers of input variables are used. By observing the results of the proposed method, the effectiveness of the proposed method is discussed. As a result, high prediction rate was achieved in the ship design. Accordingly, to the initial design stage, the ship hull plate classification program can be used to predict the ship production cost. And the proposed method will contribute to reduce the production cost of ship.

• 산업경영시스템학회지
• /
• 제32권3호
• /
• pp.110-117
• /
• 2009

This paper introduces a case study for efficient generation of production schedules in a tube manufacturing system. The considered scheduling problem consists of two sub problems : lot sizing for a job and Job sequencing. Since these problems require simulation optimization in which the performance measures are obtained by simulation execution, the trade-off between solution quality and computation time is an important issue. In this study, the optimal lot size for every product type is determined from simulation experiments. Then, target production quantity for each product type is transformed to several jobs such that a Job consists of determined lot size. To obtain the good solution for a Job sequence in a reasonable time, a number of alternatives are generated from heuristic rules developed by intuition and analysis of the considered system, and a job sequence is selected from simulation experiments.

• 한국시뮬레이션학회논문지
• /
• 제8권4호
• /
• pp.73-87
• /
• 1999

Order Review/Release (ORR) System is the linkage between planning system and actual production. Reduction of the waiting time on the machines, work in process and lead time variation may be achieved by adopting ORR strategies. But researchers on the ORR do not agree on the effectiveness of ORR. Some say that the overall system flow time may be increased if ORR is adopted, but others say that ORR can reduce work in process, flow time and variation of flow time. The objective of this research is to clarify under what environments order release strategy is effective. Simulation study was conducted in a hypothetical job shop. The experimental results show that dispatching rule is much more important than ORR is in controlling the shop floor. But the results indicate that ORR can reduce mean shop flow time, average work in process and variation of shop flow time under such environments where utilization level is high and planned order is weekly released to the order pool. And the results also show that the effect of plan smoothing on the ORR is insignificant, which is inconsistent with the results of the previous researches.

• 수산해양기술연구
• /
• 제49권1호
• /
• pp.40-50
• /
• 2013

This study is aimed to find a control factor for the marine casualty of fishing vessel by using the risk quantitative method of marine casualty, and sequentially timed event analysis for the reason finding. The result is that collision, sinking, and capsizing took high risk need to be strongly controlled. And the accident reason and control factors distinguished are as follows. The 82.2% of collided fishing vessels have negligence of look out as a immediate cause, while it was judged that underlying causes were the characteristics of vessels and fishing method, lack of suitable complement, fatigue, the prejudice or ignorance on steering and sailing rules. So the control factors are; firstly needs educational control measures and in terms of systemic control approach expand the range of the certificate of competency more smaller tonnage.

• 대한인간공학회지
• /
• 제21권1호
• /
• pp.67-80
• /
• 2002

An efficient torso pattern has been developed to cope with the future trend of order-based, individualized production like the E.C.(Electronic Commerce) in the apparel industry, and to make a database foundation of automatic garment pattern drafting. For this purpose, a non-contact three-dimensional anthropometric measurement system was used to provide a lot of accurate body data for better individual fit, and an automatic pattern drafting system that can easily generate various size patterns and construct a pattern database has been developed too. The subjects of this research were 18 to 24 year-old women whose data had been gathered through the Korean national investigation of anthropometry for industrial standards in 1997 and various body shapes were analyzed by the measurements. And a special software system has been developed to verify the validity of newly proposed drawing rules. The results of sensory evaluation for appearance and moving fitness of the new torso pattern showed a significant improvement in individual fit even for the figures with large deviation from standard shape compared with the results of the traditional one.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.904-909
• /
• 2011

The development of train control system shall operate a series of processes like system designing, system production and system performance evaluation as a result of various requirements analysis presented in operation rules, operating guidelines for railway organizations etc, notified by the nation. Therefore, considering operation conditions, operation plan, linkage to railway network etc, the major document like system functional specifications, system development specifications, system test plans etc must be drawn up. In this paper we classify system operating scenarios required to prepare for system standard specification and system performance evaluation report of CBTC system for urban subways supporting unmanned automatic operation, and adjust each of the operating status.

• 전자공학회논문지B
• /
• 제31B권7호
• /
• pp.159-169
• /
• 1994

In this paper, we develop a prototype of ITS(Intelligent Tutoring Systems) system: UNIX TUTOR. It is designed for the purpose of teaching the UNIX beginners the principal concepts of UNIX and the shell commands using the communication between the student and the system. UNIX TUTOR engages the student in a two-way conversation that is mixed-initiative dialogue and attempts to teach the student UNIX via the Socratic method of guided discovery and the Coaching method interchangeably. And the student model is based on both the overlay model and the buggy model together. Thus TUTOR aims at teaching the students effectively whose levels of learning are different using various explanations which are determined by the student model. Because the knowledge representation for UNIX-TUTOR is based on the frame structure and the production rules it is easy to represent the complicated constructs. UNIX TUTOR is implemented on the SPARC station using X/Motif and C for cp command among 10 ones which were selected.

• World Technopolis Review
• /
• 제5권1호
• /
• pp.71-82
• /
• 2016

This paper explores, explains and describes a framework for analyzing collaborative governance, decent work and innovation as fundamental elements of sustainable workplaces through case study of Philippine science and technology (S & T) parks. Rules, or the legal infrastructure, are particularly significant considerations that facilitate or hinder collaboration. Industrial relations/human resource (IR/HR) practices are essential to collaboration and decent work. Employee consultation and labor-management council or committee are examples of IR/HR practices that might contribute to collaboration and decent work in firms and workplaces in S & T parks as they are team approaches to production, too. Collaboration and decent work enhance the capacity to innovate. In the long run, collaborative governance, decent work and innovation tend to converge in the concept of sustainable development. The interdependencies and interactions among collaborative governance, decent work and capacity to innovate in firms operating in S & T parks make possible new solutions to new problems (i.e., innovation) and, thus, sustainable workplaces.

• 한국정보시스템학회지:정보시스템연구
• /
• 제16권1호
• /
• pp.111-133
• /
• 2007

The purpose of this study is to present a new function point estimation approach for the Object-Oriented information systems. In order to fulfill this purpose, we first review the literature on Function Point Analysis of IFPUG, Unified Modeling Language, and Unified Process. Then, we derive a method and rules for estimating Function Points based on Use Cases and Class Diagrams. To analyze the appropriateness of the proposed approach, we conduct the empirical testing. 143 use cases are collected from production, marketing, distribution, sales, and other areas from the Object-Oriented systems development projects. We compare our new approach with the existing methods that are usually used for traditional systems development projects. The results show that our proposed approach is more appropriate for the Object-Oriented environment.