• Journal of Environmental Science International
• /
• v.9 no.1
• /
• pp.75-80
• /
• 2000

Kinetic data for the acid phase anaerobic digestion were presented in this study and the constants were determined with acid production rate and gas production rate. Process models based on continuous culture theory were used to describe the characteristics of the acid forming microorganisms and to enable further development toward utilization of the process in a more rational manner. Acid phase digestion can be separated with appropriate manipulation of hydraulic retention time in anaerobic digestion. Kinetic analysis of data from the various hydraulic retention times using a phase specific model obtained form the acid phase indicated maximum specific growth rate of 0.40/h, saturation constant of 2,000mgCOD.$\ell$, yield coefficient of 0.35 mgVSS/msCOD utilized and decay constant of 0.04/h for the acid production rate. Similar analysis of data for the gas production rate indicated maximum specific growth rate of 0.003/h, saturation constant of 2,200mgCOD/$\ell$, yield coefficient of 0.035 mgVSS/mgCOD utilized and decay constant of 0.06/h.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.129-129
• /
• 2022

The production area of Italian ryegrass feed is gradually increasing and labor-saving technologies are being developed. If sowing and fertilization are carried out agricultural drones, working hours and labor are reduced. The purpose of this study is to suggest an appropriate seedling amount for feed production by drone spreading of Italian ryegrass in spring. In addition, we would like to review the productivity of the drone seeding machine that is being developed by Rural Development Administration(RDA) of Korea. Italian ryegrass was sown by a drone in February at the NICS located in Gyehwa-hwa, Jeollabuk-do, South Korea. In Experiment 1, 50kg/ha, 60, 70, and 80 seeding rates were sown with a horizontal spreader drone. In Experiment 2, uniform spreaders type drone and horizontal spreader type were sown with the same seeding amount and compared. The drone was sown using the AF-52 aircraft. The higher the seeding amount, the higher the emergence rate. As the seeding amount increased, the plant length increased, but the number of tillers per individual decreased. The dry matter weight of the feed was the highest at 1,326kg/10a at the seeding rate of 70kg/ha, and decreased by 20.5% at the seeding rate of 80kg/ha. The coverage ratio was the highest at 96 at the seeding rate of 70kg/ha, which was the most advantageous for spring sowing. In the comparative experiment according to the spreader type, the uniform spreader had a high emergence rate per unit area. When the uniform spreader was used, the dry matter weight of the feed was 17% higher than that of the horizontal one, and the coverage was about 5% higher.

• Journal of Environmental Policy
• /
• v.2 no.2
• /
• pp.65-79
• /
• 2003

More than 145 million tons of liquid whey is produced world-wide as dairy processing waste per year, and half of it is discarded without proper treatment. Due to its high nutrient value, the environmental impact can be significant. Bioconversion of cheese whey can provide an effective way to reduce the waste and, at the same time, generate economically attractive value-added chemicals. In this study, cheese whey was fermented with P. acidipropionici to produce propionic acid which has a high market value for chemical and pharmaceutical industries. In order to specifically enhance propionic acid production, acetic acid production was suppressed using o-iodosobenzoic acid as an enzyme inhibitor. When grown in the presence of the inhibitor, propionic acid production rate increased by a factor of 2 while acetic acid production rate decreased by a factor of 3. Furthermore, when 0.3 mM of o-iodosobenzoic acid was used, the incipient stage(creeping growth period) was considerably reduced. Therefore, the inhibitor helps the cells begin to grow earlier and speed up the production of propionic acid. Although the production rate of propionic acid effectively increased, the final concentration(or production yield) remained unchanged due to product inhibition. Methods that can reduce product inhibition are being tested combined with o-iodosobenzoic acid to optimize both the production rate and yield. The results are expected to be informative for controlling the other byproducts for other applications.

• 한국생물공학회:학술대회논문집
• /
• 2000.04a
• /
• pp.211-214
• /
• 2000

Marine Microorganism strain 96CJ10356 produced extracellular polysaccharide (EPS-R) accompanied with cell growth. To improve the production of EPS-R, the effect of aeration rate was tested in a 5-liter jar fermentor with STN medium. The production of EPS-R was increased with aeration rate and after 72 hour cultivation, 12.20 g/l of EPS-R was obtained with an aeration rate of 1.5 vvm and the apparent viscosity was measured to be about 1000 cp with culture broth.

• 한국생물공학회:학술대회논문집
• /
• 2003.04a
• /
• pp.249-252
• /
• 2003

Maximal production of heteropolysaccharide-7(PS-7) with a batch culture for 48 hr was $10.0\;g/{\ell}$ and its conversion rate from 2% (w/v) glucose to PS-7 was 50%. After substitution of media, production of PS-7 continued and reached its maximal production. The highest productivity occurred when the fresh medium, which contained all ingredients, for the production of PS-7 was substituted. Higher production of PS-7 was maintained at a dilution rate of 0.0125, which was established as the optimal dilution rate for the production of PS-7 by B. indica HS-2001.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.11
• /
• pp.1598-1603
• /
• 2000

Broiler litter can be used as a feedstuff for ruminants. Fifty seven litter samples collected from 47 farms in Kyungkee Province of Korea were analyzed to assess the effects of type and amount of bedding (rice hulls vs. sawdust), season (winter vs. summer) and drinkers (bell- vs. trough-type) on composition of broiler litter. Rearing conditions of broilers were also surveyed from the farms to estimate annual production rate of litter. Nutrient composition of broiler litter varied widely and moisture and ash concentrations were higher than observed by other researchers. Ash concentration was higher (p<0.05) for samples taken in winter than in summer and higher (p<0.05) in the rice hulls- than in the sawdust-based litter both in winter and summer. Only minor differences in litter composition were noted between drinkers. Ash was negatively correlated with crude protein and neutral detergent fiber (p<0.01), and acid detergent fiber (p<0.05). The estimated litter production rate was 2.7 kg per bird per flock on a wet basis (60% DM) and the annual production rate was 12.7 kg per bird per yr (60% DM). Therefore, the 42 million broilers per month grown in Korea in 1999 produced a total of 533,400 metric tons of litter.

• Journal of Life Science
• /
• v.9 no.4
• /
• pp.368-374
• /
• 1999

Three soybean cultivars, Hwangkeum, Tanyeob and Enrei were planted in the same pot under glasshouse conditions to investigate the influence of the different soil water content such as pF 1.4(wet), 2.1(control) and 3.6(dry) on the transpiration rate, dry matter production and water requirement. The transpiration rate remained the high constant rates under the wet soil condition and the control than the dry condition, and showed a linear correlation between transpiration rate and solar radiation under the all condition of soil water. The transpiration rate highly increased in the morning, but dramatically decreased in the other time in a day. The dry matter production was higher under the conditions of wet soil and the control than that under the dry condition. Also, the dry matter production Tanyeob was higher than other cultivars under all soil water content. The water requirement was higher for Enrei and lower Tanyeob than the control.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.05a
• /
• pp.368-371
• /
• 2004

It analyzes the quality of the fine aggregate which is reproduced through a dry production process with cyclone and a wet production process. The conclusions of the study are as follows. 1. The recycled fine aggregate through the dry production process with cyclone shows the low rate of absorption and impurity content after the cyclone process. It shows that its density is 2.37, absorption rate is 4.8 and stability is $5.1\%$ and less. Therefore, it satisfies the standards of KS F 2573(recycled aggregate for concrete) as the first grade. 2. The recycled fine aggregate through the wet production process shows the low rate of absorption and foreign substance content after the process of wash and dehydration. It shows that its density is 2.40, absorption rate is 3.12 and stability is $3.2\%$ and less. Therefore, it satisfies the standards of KS F 2573(recycled aggregate for concrete) as the first grade.

• KSBB Journal
• /
• v.6 no.4
• /
• pp.351-361
• /
• 1991

This study is on the investigation of hydrogen production and substrate removal by photosynthetic bacteria. After using of Rhodospillum rubrum KS-301 and IFO 3986, which are photosynthetic bacteria as strains, R. rubrum KS-301 was turned out a better strain. And result of experiment in which glucose and sodium lactate, components of wastewater, were used limiting substrates, showed that the productivity of hydrogen was indifferent with the kind of substrates. In batch experiments using free cells and immobilized whole cells, the decrease in hydrogen productivity was observed in the latter case. From the results of these experiments, specific growth rate of cells, specific utilization rate of glucose, and specific production rate of hydrogen were calculated. And each rate was expressed in the form of Monod equation of which parameters were estimated. Also the optimum condition of hydrogen production for free cells was $30^{\circ}C$, pH 7, and 12,000 Lux, and the optimum immobilized condition was as follows: initial immobilized cell concentration 1.0g/L, sodium alginate concentration 2% and light intensity 12,000 Lux.

• Journal of the Korean Society for Railway
• /
• v.7 no.1
• /
• pp.55-59
• /
• 2004

Composite materials were used widely due to merit of light weight, low maintenance cost and easy installation. But it is the cause of enormous casualties to men and properties because of weak about the fire. Particularly, it is more serious in case of subway train installed composite materials. For this reason, experimental comparison has been done fur measuring heat release rate(H.R.R) and smoke production rate(S.P.R) of interior panels of electric motor car using cone calorimeter. A high radiative heat flux of 50kW/㎡ was used to bum out all materials and to simulate the condition of fully developed fire case in the tests. It was observed that Heat Release Rate and Smoke Production Rate curves were dependent on the kinds of the interior materials. From the heat release rate curves, the sustained ignition time, peak heat release rate and total heat release rate were deduced, These data are useful in classifying the materials by calculating two parameters describing the possibility to flashover.