• Land and Housing Review
• /
• v.2 no.4
• /
• pp.491-501
• /
• 2011

This study estimated economic value and benefits of Yongsan National Park, which will be constructed by financial investment of the government and objectively estimated the real value of it by understanding the value of the park from a user's view of the park. For this, the value of Yongsan National Park is divided into using value such as carbon reduction and the function of relieving urban heat island as an environmental material and non-using value based on willingness to pay of the public according to the construction of the park. As a result of the analysis, it was found out that the using value of Yongsan National Park would reach 130 million won up to maximum level of 450 million won per year, and the non-using value was analyzed to be worthy of 2,344 won per capita every month. Besides, economic ripple effect that can be expected in the process of the park construction project was analyzed to be a national policy that creates effect on production inducement of 2.6 trillion won and value added of 809.6 billion won and new jobs for 25,620 persons. Considering the value of Yongsan National Park and the effect of the project based on the result of this study, it was found that it could sufficiently secure the validity of implementing the project compared to the financial investment by the government. Therefore, it must be emphasized that diffusion strategy is necessary for national understanding and for a nation to make it understood its appropriateness widely in respect to the construction of Yongsan National Park for the successful construction of Yongsan National Park and to raise its using value in the future.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.8 no.1
• /
• pp.91-97
• /
• 1970

It is one of the important subjects in fall crop production of potatoes in korea to find the proper direct planting method as a substitute for transplanting method by sprouting inducement at seed-bed. From this point the author has undertaken this experiments to examine the effects of several handling methods of seed tuber pieces at planting on sprouting of fall grown potatoes at Ansung Agricultural College from August to september in 1969. The results of experiments induced sprouting with Gibberellin treatment using the variety Irish Cobbler were as follows; 1. Sun light exposure treatment to cut surface of potato seed pieces resulted in rotting of seed pieces and delay of sprouting and bud growth. Exposure more than three hours induced severe rotting(more than fifty percent) of seed pieces (Table I). 2. When soil moisture are abundant and the duration of sun light. exposure is short, even direct planting method of treated seed pieces with Gibberellin resulted in good potato stands (Table 2). 3. The direct planting method, as the rotting of seed pieces are avoidable are applicable in fall crop production of potatoes us a substitute for transplanting method because the sprouting and bud growth are promoted more in case of direct planting than transplanting (Table 3). 4. When the humidity in the bottle was low no healing effects was found by holding the seed pieces in large closed bottle under the trees for three days before planting (Table 2). 5. If duration of sunlight exposure is short, no difference of potato stands between clear day planting and cloudy day plant ing (Table 3). 6. As long as soil moisture deficiency. was not induced the irrigation at planting shows no effects to protect the seed piece rotting after planting (Table 3).

• Journal of Energy Engineering
• /
• v.25 no.3
• /
• pp.1-8
• /
• 2016

North Korea is currently undergoing an economic crisis of industrial productivity reduction, which resulted from decreased energy production and economic sanctions due to conflicts with the international society. This paper examined the technological status of North Korea's natural gas and coal industries which are essential sectors for recovery of the economy and North-South cooperation on energy industry. This paper also analyzed investment strategies in North Korean energy industries and calculated the size of economic ripple effect of the investment on North and South Korea. In order to analyze the effect of the investment on North Korean economy, we constructed an inter-industry relation table of North Korea for year 2014 and used an input-output model. The ripple effect of the investment in natural gas and coal industries turned out to be 1.012 billion dollars and 2.742 billion dollars respectively. In order to analyze the ripple effect of the investment on South Korean economy, we constructed an inter-industry relation table of South Korea for year 2013 and used a demand-driven model for inter-industry analysis. As a result, production, added-value and employment inducement coefficients of the investment were calculated as 2.02073, 0.62697 and 8.99409 for the natural gas industry and 2.02130, 0.62701 and 9.00413 for the coal industry respectively.

• Economic and Environmental Geology
• /
• v.54 no.5
• /
• pp.573-580
• /
• 2021

This study analyzed the induced effects of the aggregate and stone sectors using the industry association table. First, the added value of the aggregate and stone sectors was summarized, and then the intermediate input structure and induced effect were analyzed. In terms of value-added structure, aggregate and stone showed a higher employee remuneration rate compared to the manufacturing industry, and a higher rate of operating surplus compared to other mining industries. The intermediate input structure summarizes the sector using aggregate and stone products as intermediate inputs and their input ratio. The proportion of the intermediate element input structure was confirmed. In addition, the main input sectors of ready-mixed concrete, the largest consumer of aggregate and stone, are also summarized. The production-inducing effect of aggregate and stone showed a higher influence coefficient than the sensitivity coefficient, confirming that they had a relatively large rear chain effect. The production inducement effect was reviewed by reconstructing the industry association table, and it was found to show a relative superiority in the influence coefficient, similar to the results derived according to the provisional classification of the Bank of Korea.

• Journal of Internet Computing and Services
• /
• v.21 no.3
• /
• pp.71-81
• /
• 2020

The digital bio-healthcare industry is one of the three major fostering industries of the Korean Moon Jae-In government. The purpose of this study is to compare and analyze the ripple effect and investment effect in digital bio-healthcare industry. Analyzing the ripple effects of the digital bio-healthcare industry is very important to induce policies on industry and technology development. First, the research methods were reclassified into 33 industries in the standard industry classification and rewritten into 35 industry classification tables. Second, various trigger coefficients and ripple effects coefficients were rewritten by the analysis framework of the industrial association table. Third, we compared the ripple effects of related industries in the production, investment, value-added and jobs sectors of the digital bio-healthcare industry. Finally, in terms of investment effects, the effects of in-house and related industries were compared. The result of this study would be helpful in the establishment of industrial policy and technology development policy.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.5
• /
• pp.20-28
• /
• 2014

The high velocity oxygen fuel spraying (HVOF) is a kind of surface modification process technology to form the sprayed coating layer after spraying the powder to molten or semi-molten state by the ultra-high speed at the high-temperature heat source and conflicting with a substrate. It is desirable to melt completely the thermal spray powder in order to produce the coating layer with an optimal adhesion, however, because a semi-molten powder in a spray process has the low efficiency and become a factor that degrades the mechanical property by the inducement of pore-forming within the coating layer. To improve the wear resistance, corrosion resistance and heat resistance, in this study, the plungers of high-speed and ultra-high pressure reciprocating hydraulic pumps for oil and water used in ironwork are produced with $420J_2$ and the coating layers of plungers are formed by the powders of WC-Co-Cr and WC-Cr-Ni including the high hardness WC. The surface of these plungers is modified by the super-mirror face grinding machine using variable air pressure developed in this laboratory, and then the characteristics of cross-sectional microstructure, and surface roughness and hardness values between no operation and 100 days-operation are examined and made a comparison. The fine tops and bottoms on surface roughness curve of oil-hydraulic pump plunger sprayed by WC-Cr-Ni are molded more and higher than those of water-hydraulic pump sprayed by WC-Co-Cr because the plunger diameter of oil-hydraulic pump is 0.4 times smaller than that of water-hydraulic pump and the pressure of oil-hydraulic pump exerted on the plunger is operated with the 70 bars higher than that of water-hydraulic pump. As a result, it is found that the values of centerline average surface roughness and maximum height for oil-hydraulic pump plunger are bigger than those of water-hydraulic pump plunger.

• Journal of Environmental Policy
• /
• v.9 no.2
• /
• pp.21-39
• /
• 2010

In this paper, water consumption annually for industries in Korea was estimated for the first time and based on this, an input-output model was prepared for water consumption analysis. Also making use of this, the direct and indirect water consumption effect according to industrial activities was analyzed and the total effect based on volume was broken down into each factor. The amount of water consumed for industries in Korea (excluding agriculture, forestry and fishery) was estimated about 7 billion and 692 million ton in 2003(excluding sea water). Classifying by industry, the one for electric power & water service accounted for almost half, 49.5%, metalworking industry for 24.3% and chemical industry for 5.0%. As the result of estimation for the direct and indirect water consumption inducement coefficients, the amount of water consumed per the production of one million won ranked the highest for electric power & water service as 113.8 ton and the next highest ones ranked as 49.6 ton for the first metalworking, 16.8 ton for textile and leather goods, and 11.9 ton for general machinery respectively. In the meantime, as the result of breaking down into each factor of total amount of water consumed by industry, it appeared that the ripple effect having on other industries was more than the direct effect.

• Journal of Technology Innovation
• /
• v.23 no.3
• /
• pp.341-372
• /
• 2015

While creativity and innovation is the key to drive the creative economy in the South Korea, the development of analysis framework to evaluate the size and performance is limited. The present study suggests a framework and a method to assess economic impact of the creative economy using inter-industry analysis which employs input-output efficiencies populated by the Korean Bank and empirical data from the national informatization survey conducted by the National Information-society Agency(NIA). The results indicated that, as of 2013, despite of economy downturn, the creative innovation based on the information communication technology(ICT) had been significantly led the production, value-added, and employment inducement. The effect is predominant in the creative industry in an broad sense, that is, technology intensive manufacturing industry. Theoretical and policy implications are discussed.

• Journal of Acupuncture Research
• /
• v.24 no.4
• /
• pp.167-181
• /
• 2007

Objectives: To evaluate expression of MIF mRNA, MIF, $TNF-{\alpha}$, $IL-6R-{\alpha}$, STAT-3, $NF-{\kappa}B$ p65, COX-2 and iNOS, MMP-9mRNA after injecting deer antler herbal acupuncture solution in a LPS rat model. Methods: The experiment was divided in category of the control group, RA group, and NA group. RA was induced in the mice via injecting 300ug/kg LPS. The deer antler herbal acupuncture solution 50ug/kg was applied on $ST_{35}$(犢鼻) and EX-LE201(內膝眼) for 19days from $3^{rd}$ day of RA inducement. Results: 1. In the deer antler herbal acupuncture solution treated RAW 264.7cell, the mRNA expression of cytokines, RA related inflammation factors, such as the MIF, COX- 2, iNOS, and MMP-g reduced concentration dependently. 2. In the deer antler herbal acupuncture treated mice's synovial membrane, decrease in the cell replication of synovial joint cells, regeneration of blood vessel, fibrosis and fibroblastic cells expansion were observed. 3. Positive reaction of RA-related cytokines MIF, $TNF-{\alpha}$, $IL-6R-{\alpha}$, STAT3, COX-2, iNOS, $NF-\;{\kappa}B$ p65, MMP-9 was reduced. Conclusion : On the basis of the results, it was concluded that deer antler herbal acupuncture extract has significant protecting ability against acute progressive RA by inhibiting the production of MIF, as a top in cytokines related to inflammation.

• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.2
• /
• pp.174-183
• /
• 2001

During the rapid phase of gonadal development of the freshwater teleost, the catfish (Silurus asotus), the influence of hCG upon the inducement of final oocyte maturation and spawning was investigated electrophoretically and ultrastructurally. The electrophoretic patterns obtained were different in the presence and absence of some of the major or minor zones, because of the hormone level in catfish. The vitellogenin of hormone-treated fish was stained more intensively than that of sham-treated fish. These proteins showed some minor or main bands of egg extracts which migrated at positions corresponding to molecular weights of approximately 90,000. However, the thickness of electrophoretic band in molecular weight for hCG-treated fish was slightly lower than that for saline control. It seemed the plasma protein with molecular weight of approximately 45,000 in hCG-treated fish disappeared. In contrast to the control fish, the ovaries in the catfish treated with hCG shows a marked ultrastructural change under the electron microscope. No dilated profiles were seen in the granulosa cells of the mature oocyte before ovulation. After germinal vesicle breakdown (GVBD), the zona radiata interna (ZRI) becomes more compact, and there is a loss of all the processes from the pore canals. There is a wide space between the vitelline membrane and zona radiata. Also, during final maturation, the microvillar processes from the oocyte are seen no longer to penetrate deeply into the extracellular spaces of the overlying granulosa cells, and the reticulate patterns of the zona radiata interna becomes occluded, giving the zona radiata a more solid appearance. It has been possible to initiate 100% oocyte maturation in yolk granules and follicles in vivo by treatment with hCG and a high water temperature ($27^{\circ}C$). In hCG-treated fish, the percentages of successful artificial fertilization and hatching were maximal at 15 h after a single injection. It seems clear that a long acting preparation containing hCG can be successfully used in prespawning fish to advance the final events of gonadal maturation and initiate spawning. Further studies are necessary to evaluate the potential of hCG to either stimulate or inhibit the reproductive development of fish at other stages of the seasonal reproductive cycle.