• Korean Chemical Engineering Research
• /
• v.53 no.5
• /
• pp.584-589
• /
• 2015

For effective power generation with fuel cells in low-oxygen environments such as submarines and unmanned underwater vehicles, a hydrogen source which has a high hydrogen storage density is required. Diesel fuel is easy to storage and supply due to its liquid phase and it has a high density per unit volume and unit mass of hydrogen that required for driving the fuel cells. In this paper, diesel fuel was selected as a hydrogen source for driving the fuel cell in oxygen lean environments. In addition, the aqueous hydrogen peroxide solution was suggested as an alternative oxidant for hydrogen production through the diesel reforming reaction because of its high oxygen density and liquid phase which makes it easy to storage. In order to determine the characteristics of hydrogen peroxide as an oxidant of diesel reforming, comparative experiments were conducted and it was found that hydrogen peroxide solution has the same characteristics when reformed with oxidants of both steam and oxygen. Moreover, the commercial diesel reforming performances were analyzed according to the reaction temperature and concentration of aqueous hydrogen peroxide solution. Then, through the 49 hours accelerated degradation tests, the possibility of hydrogen production via diesel and aqueous hydrogen peroxide solution was confirmed.

• Journal of Broadcast Engineering
• /
• v.12 no.5
• /
• pp.480-490
• /
• 2007

Changes in political and economic environments require a new concept of 'culture' and a paradigm shift in cultural policies. Especially, broadcasting is needed to construct a productive infra-structure in order to play its role as culture industry in multi-channel environments caused by the progress of digital technology. In addition, Korea-USA FTA Agreement and a subsequently expected open policy of broadcasting market raise issues of a flow of foreign capital and a compatibility of cultural diversities and cultural identities. From this perspective, this study attempts to suggest alternatives for cultural diversity of program contents in new global media environments. More specifically, these alternatives examine the meaning and achievements of co-production of broadcasting programs as an active and direct method to preserve cultural identities and universalities of cultural contents at the same time. Details of this study are as follows: thorough review of internation co-production and program format industries and their possibilities to overcome cultural harriers and to provide local alternatives.

• Asian-Australasian Journal of Animal Sciences
• /
• v.2 no.3
• /
• pp.303-304
• /
• 1989

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.24 no.5
• /
• pp.817-838
• /
• 2014

Test environment on the company that handles a large amount of data such as telecommunications companies and financial institutions, may not always be the same as the production environment, which is caused by conversion of important columns about information and limitation of storage capacity due to the construction cost. Therefore, SQL performance degradation that occurs when the test and production environments are not the same, which is an important cause of connecting to the unexpected failures of online transactions, and it generates financial loss of business, customer complaints, a decrease in reliability. In studies related SQL performance, it has so far been conducted mainly studies of tuning associated with DBMS Optimizer, and it has not been addressed issues of this sector. Therefore, in this paper, I verify the validity about presentation of the advanced SQL Performance-based IT application change management process, in order to prevent failures of the online transactions associated with poor performance of SQL generated by differences in test and production environments.

• Industrial Engineering and Management Systems
• /
• v.7 no.2
• /
• pp.160-170
• /
• 2008

This paper proposes a mathematical model for converting conveyor assembly line to cellular manufacturing in complex production environments. Complex production environments refer to the situations with multi-products, variant demand, different batch sizes and the worker abilities varying with work stations and products respectively. The model proposed in this paper aims to determine (1) how many cells should be formatted; (2) how many workers should be assigned in each cell; (3) and how many workers should be rested in shortened conveyor line when a conveyor assembly line should be converted, in order to optimize system performances which are defined as the total throughput time and total labor power. We refer the model to a new production system. Such model can be used as an evaluation tool in the cases of (i) when a company wants to change its production system (usually a belt conveyor line) to a new one (including cell manufacturing); (ii) when a company wants to evaluate the performance of its converted system. Simulation experiments based on the data collected from the previous documents are used to estimate the marginal impact that each factor change has had on the estimated performance improvement resulting from the conversion.

• Korean Journal of Agricultural Science
• /
• v.46 no.3
• /
• pp.417-426
• /
• 2019

This study was conducted to evaluate seasonal effects on production performance of lactation sows reared in two different environments in South Korea. A total of 76 sows ($Landrace{\times}Yorkshire$) from the Dankook University experimental farm and 120 sows ($Landrace{\times}Yorkshire$) from a commercial farm were collected. In the current study, reduced (p < 0.01) feed intake and energy intake during lactation were observed in warm season compared with cool season in both farms. Sows in cool season had higher backfat thickness at weaning but lower back fat loss (p < 0.01) than those in warm season. The weaning to estrus interval was lower (p < 0.01) in cool season than in warm season. Piglets weaned in warm season had lower (p < 0.01) body weight (BW), body weight gain (BWG), and average daily gain (ADG) at weaning than did those weaned in cool season on the Dankook University farm, whereas the reduction effect was only observed during 0 - 21 d on the commercial farm (p < 0.01). Moreover, piglets weaned in cool season had higher BW, BWG, and ADG (p < 0.05) on both farms. In conclusion, our results indicate that warm season had very negative effects on feed intake and production performance of lactating sows and piglets.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.47 no.2
• /
• pp.116-123
• /
• 2024

In the manufacturing industry, dispatching systems play a crucial role in enhancing production efficiency and optimizing production volume. However, in dynamic production environments, conventional static dispatching methods struggle to adapt to various environmental conditions and constraints, leading to problems such as reduced production volume, delays, and resource wastage. Therefore, there is a need for dynamic dispatching methods that can quickly adapt to changes in the environment. In this study, we aim to develop an agent-based model that considers dynamic situations through interaction between agents. Additionally, we intend to utilize the Q-learning algorithm, which possesses the characteristics of temporal difference (TD) learning, to automatically update and adapt to dynamic situations. This means that Q-learning can effectively consider dynamic environments by sensitively responding to changes in the state space and selecting optimal dispatching rules accordingly. The state space includes information such as inventory and work-in-process levels, order fulfilment status, and machine status, which are used to select the optimal dispatching rules. Furthermore, we aim to minimize total tardiness and the number of setup changes using reinforcement learning. Finally, we will develop a dynamic dispatching system using Q-learning and compare its performance with conventional static dispatching methods.

• Korean Management Science Review
• /
• v.10 no.2
• /
• pp.61-77
• /
• 1993

This paper involves a study of developing the production scheduling system in a general job shop type mechanical factory. We consider realistic situations in the job-shop environments, such as alternative machines for operation, the new kinds of processes, the machining center with the plural pallet, the operational situation of each machine during the scheduling period, occurings of urgent orders and machine breakdowns. We also propose the methodology of re-schedule. It is very fast and acceptable for real time production control system. These all functions are implemented on IBM PC and program source is written in PASCAL language.

• Korean Journal of Computational Design and Engineering
• /
• v.6 no.3
• /
• pp.198-205
• /
• 2001

Under the concept of global economy, the enterprises are assigning design and production environments around the world in different areas. In shipbuilding companies, a serious problem of information exchange emerges as companies use traditional hardware and very distinct softwares appropriate to their field of expertise. To overcome the decreased productivity due to the interruption of information, the concept of simultaneous engineering and concurrent design becomes very significant. In this article, the concept of collaborative design based on internet environments is described. Especially, the core technologies to achieve collaborative design environments among shipbuilding companies, ship owners, ship classification societies, model basin, and consulting companies are adopted.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.4
• /
• pp.386-394
• /
• 2012

Recent trends in the flexible manufacturing systems are morphing cell control for the shop-wide production operation system and providing the integrated operation and execution system together with vendor-specific FMC/FMS platform. In these requirements, the shop-floor level operation system plays a role of coordinating the control activity of each cell, and has to provide flexibility for the complexity of mixed operations of various cells. This paper suggests a system architecture for the mixed environments of multi-cells and job shop, its corresponding enabling technologies based on comparative studies with other related studies and commercialized systems. This approach includes a process definition model considering the integration with upper BOM-BOP and external service modules, and reconfigurable device-level interface which provides dynamic interconnections with machine tools and cell controllers. The function modules and their implementation results are also described to provide the feasibility of the proposed approaches as the flexible shop-floor operation system for the multi-cell environments.