• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.5
• /
• pp.605-612
• /
• 2000

Four young swamp buffalo cows of similar age ranging in weight between 280 to 380 kg and trained to do physical work were used in a study to determine energy and protein requirements for draught using a $4{\times}4$ Latin square designed experiment. The experiment consisted of field trials employing 4 levels of work load, e.g. no work as control, and loads amounting 450 to 500 Newton (N) pulled continuously for 1, 2 and 3 h daily for 14 consecutive days. Cows were fed king grass (Penisetum purpuroides) ad libitum and were subjected to materials balance trials. Body composition was estimated in vivo by the body density method and daily energy expenditure (EE) was calculated from ME minus retained energy (RE). The results show that EE while not working ($EE_{resting}$) was $0.42kgW^{0.75}MJ/d$ and maintenance ME ($ME_m$) was $0.37kgW^{0.75}MJ/d$. ME requirement increased to 1.65 times maintenance for the work of 3 hours. The energy expended for doing exercise ($E_{exercise}$) was 9.56, 20.0 and 25.86 MJ/cow for treatments 1, 2 and 3 II, respectively. Fat retention was absent in all groups of working cows, but protein retention was only negative for cows undertaking 3 h work. The relationship between $E_{exercise}$ (MJ), work load (F, kN), work duration (t, h) and body mass (W, kg) was found to be: $E_{exercise}=(0.003F^{1.43}t^{0.93})/W^{0.09}MJ$. The maintenance requirement for digestible protein was $2.51kgW^{0.75}g/d$, whereas digestible protein for growth ($DP_{growth}$) and for work ($DP_{work}$) followed the equations: $DP_{growth}=[(258+1.25W^{0.75}){\Delta}Wkg/d]g$ and $DP_{work}=[12.59e^{0.95t}]g$, respectively The coefficients a, b and c for the calculation of $E_{exercise}$ components according to the Lawrence equation were found to be 2.56 J/kgW.m, 5.2 J/kg load carried.m and 0.29, respectively, thus efficiencies to convert ME into work were 0, 16.09, 27.3 and 32.44% for control, 1, 2 and 3 h/d work, respectively. ME and DP requirements for a 250 to 400 kg working buffalo cow allowing to growth up to 0.5 kg/d are presented.

• Korean Journal of Environmental Agriculture
• /
• v.29 no.3
• /
• pp.221-226
• /
• 2010

Swine wastewater contains high amounts of organic matter and nutrients (nitrogen and phosphorus). The biological nitrogen removal can be achieved by nitrification and denitrification processes. Nitrification-denitrification can be performed via nitrite which is called as the short-cut process. This Short-cut process saves up to 25% of oxygen and 40% of external carbon during nitrification and denitrification. In this study, the batch tests were conducted to assess the different parameters for the nitrite sulfur utilizing denitrification, such as alkalinity, temperature, initial nitrite concentration, and dissolved oxygen. The experimental results showed that the nitrite removal efficiency of the reactor was found to be over 95% under the optimum condition ($30^{\circ}C$ and sufficient alkalinity). Autotrophic nitrate denitrification was inhibited at low alkalinity condition showing only 10% removal efficiency, while nitrite denitrification was achieved over 95%. The nitrite removal rates were found similar at both $20^{\circ}C$ and $30^{\circ}C$. In addition, nitrite removal efficiencies were inhibited by increasing oxygen concentration, but sulfate concentration increased due to sulfur oxidation under an aerobic condition. Sulfate production and alkalinity consumption were decreased with nitrite compared those with nitrate.

• Journal of Korean Society of Water and Wastewater
• /
• v.13 no.2
• /
• pp.55-65
• /
• 1999

AF(anaerobic filter)/BAF(biological aerated filter) system and UASB(upflow anaerobic sludge blanket)/BAF system, of which system effluents were recirculated to the anaerobic reactors in each system, were operated in order to investigate the performance in simultaneous removal of organics and nitrogen in high-strength dairy wastewater. Advanced anaerobic treatment processes of AF and UASB were evaluated on applicability as pre-denitrification reactors, and BAF was also evaluated on the performance in oxidizing the remaining organics and ammonia nitrogen. At system HRTs of 4.0 to 4.5 days and recirculation ratios of one to three, the AF/BAF system could achieve more than 99% of organics removals and 64 to 78% of total nitrogen removals depending upon the recirculation ratio. Although the UASB/BAF system also showed more than 99% of organics removals, total nitrogen removals in the UASB/BAF system were 53 to 66% which are lower than those in the AF/BAF system at the corresponding recirculation ratios. Optimum recirculation ratios considering simultaneous removal of organics and nitrogen and cost-effectiveness, were in the range of two to three. The upflow AF packed with crossflow module media, as a primary treatment of the anaerobic reactor/BAF system, showed better performances in denitrification, SS removals, and gas production than the UASB. Higher loading rate of suspended solids from the UASB increased the backwashing times in the following BAF. Especially, at a recirculation ratio of three in the UASB/BAF system, the increase in head loss due to clogging in the BAF caused frequent backwashing, at least once d day. The BAF showed the high nitrification efficiency of average 99.2% and organics removals more than 90% at organics loading rate less than $1.4KgCOD/m^3/d$ and $COD/NH_3-N$ ratio less than 6.4. It was proved that the simplified anaerobic reactor/BAF system could maximize the organics removal and achieve high nitrogen removal efficiencies through recirculation of system effluents to the anaerobic reactor. The AF/BAF system can, especially, be a cost effective and competitive alternative for the simultaneous removal of organics ana nitrogen from wastewaters.

• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.9
• /
• pp.1276-1281
• /
• 2001

The feeding values of four indigenous Kenyan sorghum cultivars and the effects of polyvinylpyrrolidone (PVP) on the utilization of high tannin sorghum by broiler chicks were studied in two 3-week feeding trials. In Experiment 1, one hundred and five broiler chicks (initial average weight 97 g) were randomly assigned to each one of the seven grain-soybean meal diets. The diets consisted of maize [diet 1; no assayable tannin], white sorghum [diet 2; 0.59% catechin equivalents (CE)], cream sorghum [diet 3; 0.94% CE], light brown sorghum [diet 4; 2.71% CE] and dark brown sorghum [diet 5; 3.54% CE]. Diets 6 and 7 were included to test the possibility of overcoming the detrimental effects of sorghum tannins by adding PVP at 0.25% and 0.5% to dark brown sorghum, which resulted in dietary tannin levels of 3.46% and 3.38% CE respectively. In Experiment 2, the effects of tannin on dry matter digestibility (DMD) and nitrogen (N) retention were studied in a 3-week substitution assay in which high tannin sorghum (5% CE) was substituted for white maize at different inclusion levels. Ninety broiler chicks aged 7 days (initial average weight 102 g) were randomly assigned to each one of the six diets. The diets consisted of corn gluten meal and fishmeal as protein sources plus maize [diet 1] and high tannin sorghum at different inclusion levels [diets 2, 3, 4, 5 and 6], resulting in dietary tannin levels of 0, 1.25%, 1.66%, 2.08%, 2.5% and 3.2% CE respectively. Feed intake, feed efficiency and body weight gain were measured weekly. In Experiment 2, tannin absorption, DMD and N retention were measured on days 19, 20 and 21. The results of Experiment 1 showed that feed intake, feed efficiency and body weight gain were all affected by treatment (p<0.05). Diets 1, 2 and 3 gave similar body weight gains and all were better than diets 4 and 5 (i.e. 504, 517, 473 g, vs. 256, 267 g). Similarly, feed efficiencies were higher (p<0.05) for diets 1, 2 and 3 compared to diets 4 and 5 (0.4, 0.42, 0.39 vs. 0.21, 0.23). When 0.25% PVP was added to the dark brown sorghum (diet 6) there was no significant improvement in chick performance (p>0.05). However, addition of 0.5% PVP (diet 7) resulted in significant improvement (p<0.05) in body weight gain compared to the untreated dark brown sorghum. Overall, PVP did not completely overcome the deleterious effects of tannins. The results of Experiment 2 indicate that sorghum inclusion level and subsequent tannin level had no effect on feed intake, feed efficiency, weight gain, DMD and N retention. The above results suggest that tannin level should be limited to below 2.71% CE in broiler chick diets containing 20% CP and 0.4% methionine. However, in diets with 23% CP and 0.8% methionine tannin level of up to 3.2% will not affect performance. Consequently high tannin sorghum (5% CE) can be used to substitute for white maize by up to 100% in broiler chick diets.

• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.2
• /
• pp.71-76
• /
• 2011

In this study, a heavy metal stabilization treatment using waste resource stabilizing agents was utilized on army firing range soil contaminated with Pb and Cu. Both calcined oyster shells (COS; 5% w/w) and waste cow bone (WCB; 3% w/w) were applied for a wet-curing duration of 28 days. Following the stabilization treatment, the process efficiency was evaluated by various extraction methods for Pb and Cu. Neutral and weak acid extraction methods, such as water soluble extraction and SPLP, did not show positive results for heavy metal stabilization with very low leachability. On the other hand, TCLP and 0.1 N HCl extraction showed that the stabilizing agents significantly reduced the amount of the heavy metals leached from the soil, which strongly supports that the treatment efficiency is positively evaluated in acidic leaching conditions. Specifically, in the 0.1 N HCl extraction, the reduction efficiencies of Pb and Cu leaching were 99.9% and 83.9%, respectively. From the sequential extraction results, a difference between Pb and Cu stabilization was observed, which supports that Pb stabilization is more effective due to the formation of insoluble Pb complexes. This study demonstrates that the application of waste resources for the stabilization of heavy metals is feasible.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.20 no.1
• /
• pp.61-70
• /
• 2012

Feasibility of co-digestion was investigated by a series of anaerobic batch experiments using sewage sludge, swine waste, and food waste leachate as substrates. The organic solid wastes were collected from M city, where the daily productions of sewage sludge, swine waste, and food waste leachate were 178 ton/d, 150 ton/d, and 8 ton/d, respectively. Both swine waste and food waste leachate showed superior methane yields, methane productivities, and organic pollutant removal efficiencies compared to sewage sludge. Co-digestion of the total amounts of organic solid wastes would enhance methane production by 5.60 times $(530\;m^{3}\;CH_{4}/d\;{\rightarrow}\;2,968\;m^{3}\;CH_{4}/d)$. However, it also increase the amount of digestate by 1.88 times with 3.79 to 4.92 times higher pollutants (chemical oxygen demands total nitrogen, and total phosphorus) loading rates. Co-digestion of organic solid wastes is a valid strategy to enhance the performance of an anaerobic sludge digester and the energy independence of a wastewater treatment plant. Anyhow,the increment of digestate with higher pollutant loading would need a careful counterplan in the operation of the main stream of the treatment plant.

• Korean Journal of Microbiology
• /
• v.48 no.3
• /
• pp.192-199
• /
• 2012

Microalgal biotechnology has gained prominence because of the ability of microalgae to produce value-added products including biodiesel through photosynthesis. However, carbon and nutrient source is often a limiting factor for microalgal growth leading to higher input costs for sufficient biomass production. Use of municipal wastewater as a low cost alternative to grow microalgae as well as to treat the same has been demonstrated in this study using mini raceway open ponds. Municipal wastewater was collected after primary treatment and microalgae indigenous in the wastewater were encouraged to grow in open raceways under optimum conditions. The mean removal efficiencies of TN, TP, COD-$_{Mn}$, $NH_3$-N after 6 days of retention time was 80.18%, 63.56%, 76.34%, and 96.74% respectively. The 18S rRNA gene analysis of the community revealed the presence of Chlorella vulgaris and Scenedesmus obliquus as the dominant microalgae. In addition, 16S rRNA gene analysis demonstrated that Rhodobacter, Luteimonas, Porphyrobacter, Agrobacterium, and Thauera were present along with the microalgae. From these results, it is concluded that microalgae could be used to effectively treat municipal wastewater without aerobic treatment, which incurs additional energy costs. In addition, municipal wastewater shall also serve as an excellent carbon and nitrogen source for microalgal growth. Moreover, the microalgal biomass shall be utilized for commercial purposes.

• Applied Chemistry for Engineering
• /
• v.23 no.4
• /
• pp.399-404
• /
• 2012

The objective of this study was to investigate the efficient pretreatment method for bioethanol production from rice hull. Ammonia and sodium hydroxide as an alkaline solution and dilute sulfuric acid as an acidic solution were used in a batch reactor under high-temperature and high-pressure conditions. The highest enzymatic saccharification efficiency of 82.8% and ash removal rate of 94.7% were obtained in the dilute sulfuric acid treated sample after the sodium hydroxide solution treatment. The enzymatic saccharification efficiencies and ash removals of pretreated rice hull samples have very similar variation tendency. This means that the maximum obstructive factor for the enzymatic saccharification of rice hull is the ash (silicate) content in biomass. The findings suggest that the combined sodium hydroxide-dilute sulfuric acid treatment system under high-temperature and high-pressure conditions is a promising pretreatment method to enhance the enzymatic saccharification of the silica-rich biomass.

• Economic and Environmental Geology
• /
• v.11 no.3
• /
• pp.89-98
• /
• 1978

Mineralogy, beneficiation, and processes of titanium ores are reviewed from petrographic viewpoints. The most important titanium minerals are ilmenite ($FeTiO_3$) and rutile ($TiO_2$). Ilmenite will play major role :for raw material, because rutile are rapidly diminishing. Thus, there is a need to develope a successful process for producing high grade Ti02 from ilmenite. Commercial, as well as R and D processes to treat more abundant ilmenite ores fall in three general classess: 1. Iron in ilmenite is partially or completely reduced and separated either physically or chemically. 2. Iron is reduced to ferrous state and chemically leached away from the titanium. 3. Ore is treated to make chlorides either selectively or with subsequent separation and purification of $TiC_4$. Routes and efficiencies of these process technologies are primarily influenced by the particular ore deposit to be mined and secondly by environmental considerations. One deposit parameters which influence ilmenite process technologies are: 1. Complexity of microtextures of ilmenite intergrown with Fe-oxide minerals. 2. Composition of concentrates; ilmenites contain minor amounts of substituted Mg, Mn, and V. These elements plus iron and gangue minerals can cause difficulties to complete reactions, substantial acid consumption, difficulties of removing waste solids, and waste disposal problems. Major contributions to be made by petrologists for process optimization are: characterization and interpretation of compositional and physical changes of raw materials and solids derived from process streams. These informations can play significant role in selecting and improving process steps for titania production.

• Asian-Australasian Journal of Animal Sciences
• /
• v.30 no.7
• /
• pp.1054-1060
• /
• 2017

Objective: This study was aimed at evaluating effects of cattle breed resources and alternative mixed-feeding practices on meat productivity and emission intensities from household farming systems (HFS) in Daklak Province, Vietnam. Methods: Records from Local $Yellow{\time}Red$ Sindhi (Bos indicus; Lai Sind) and 1/2 Limousin, 1/2 Drought Master, and 1/2 Red Angus cattle during the growth (0 to 21 months) and fattening (22 to 25 months) periods were used to better understand variations on meat productivity and enteric methane emissions. Parameters were determined by the ruminant model. Four scenarios were developed: (HFS1) grazing from birth to slaughter on native grasses for approximately 10 h plus 1.5 kg dry matter/d (0.8% live weight [LW]) of a mixture of guinea grass (19%), cassava (43%) powder, cotton (23%) seed, and rice (15%) straw; (HFS2) growth period fed with elephant grass (1% of LW) plus supplementation (1.5% of LW) of rice bran (36%), maize (33%), and cassava (31%) meals; and HFS3 and HFS4 computed elephant grass, but concentrate supplementation reaching 2% and 1% of LW, respectively. Results: Results show that compared to HFS1, emissions ($72.3{\pm}0.96kg\;CH_4/animal/life$; least squares $means{\pm}standard$ error of the mean) were 15%, 6%, and 23% lower (p<0.01) for the HFS2, HFS3, and HFS4, respectively. The predicted methane efficiencies ($CO_2eq$) per kg of LW at slaughter ($4.3{\pm}0.15$), carcass weight ($8.8{\pm}0.25kg$) and kg of edible protein ($44.1{\pm}1.29$) were also lower (p<0.05) in the HFS4. In particular, irrespective of the HSF, feed supply and ratio changes had a more positive impact on emission intensities when crossbred 1/2 Red Angus cattle were fed than in their crossbred counterparts. Conclusion: Modest improvements on feeding practices and integrated modelling frameworks may offer potential trade-offs to respond to climate change in Vietnam.