• Journal of Microbiology and Biotechnology
• /
• v.24 no.8
• /
• pp.1123-1132
• /
• 2014

This study evaluated the growth and nutrient removal ability of an indigenous algal consortium on real untreated municipal wastewater in a high rate algal pond (HRAP). The HRAP was operated semicontinuously under different hydraulic retention times (HRT: 2, 4, 6, and 8 days). The average removal efficiencies of chemical oxygen demand, and total nitrogen and phosphate of real municipal wastewater were maintained at $85.44{\pm}5.10%$, $92.74{\pm}5.82%$, and $82.85{\pm}8.63%$, respectively, in 2 day HRT. Algae dominated the consortium and showed high settling efficiency (99%), and biomass and lipid productivity of $0.50{\pm}0.03g/l/day$ and $0.103{\pm}0.0083g/l/day$ (2day HRT), respectively. Fatty acid methyl ester analysis revealed a predominance of palmitate (C16:0), palmitoleate (C16:1), linoleate (C18:2), and linolenate (C18:3). Microalgal diversity analyses determined the presence of Chlorella, Scenedesmus, and Stigeoclonium as the dominant microalgae. The algal consortium provides significant value not only in terms of energy savings and nutrient removal but also because of its bioenergy potential as indicated by the lipid content (20-23%) and FAME profiling.

• Journal of Microbiology and Biotechnology
• /
• v.23 no.5
• /
• pp.674-680
• /
• 2013

Yeast Dekkera/Brettanomyces bruxellensis is probably the most common contaminant in wineries and ethanol production processes. The considerable economic losses caused by this yeast, but also its ability to produce and tolerate high ethanol concentrations, make it an attractive subject for research with potential for industrial applications. Unfortunately, efforts to understand the biology of D. bruxellensis and facilitate its broader use in industry are hampered by the lack of adequate procedures for delivery of exogenous DNA into this organism. Here we describe the development of transformation protocols (spheroplast transformation, LiAc/PEG method, and electroporation) and report the first genetic transformation of yeast D. bruxellensis. A linear heterologous DNA fragment carrying the kanMX4 sequence was used for transformation, which allowed transformants to be selected on plates containing geneticin. We found the spheroplast transformation method using 1M sorbitol as osmotic stabilizer to be inappropriate because sorbitol strikingly decreases the plating efficiency of both D. bruxellensis spheroplast and intact cells. However, we managed to modify the LiAc/PEG transformation method and electroporation to accommodate D. bruxellensis transformation, achieving efficiencies of 0.6-16 and 10-20 transformants/${\mu}g$ DNA, respectively. The stability of the transformants ranged from 93.6% to 100%. All putative transformants were analyzed by Southern blot using the kanMX4 sequence as a hybridization probe, which confirmed that the transforming DNA fragment had integrated into the genome. The results of the molecular analysis were consistent with the expected illegitimate integration of a heterologous transforming fragment.

• Applied Biological Chemistry
• /
• v.38 no.4
• /
• pp.297-301
• /
• 1995

The saccharification ratio and efficiency of alcohol fermentation from hot air puffed and steamed flour of husked rice and barley varieties were compared. Enzymatic hydrolysis of husked rice flour was improved by puffing, and that of glutinous rice was higher than that of nonglutinous one. By puffing of husked rice and barley, alcohol production was slightly increased, but fermentation period was reduced comparing with steam cooked husked rice and barley. Fermentation efficiencies of husked rice by puffing and rice by steam cooking were 90.72% and 87.77%, respectively. Residual reducing sugar of barley mash was higher than that of rice mash. The pH of mash was gradually increased during fermentation and was high in case of puffing treatment.

• Environmental Engineering Research
• /
• v.10 no.5
• /
• pp.205-212
• /
• 2005

The study was conducted to investigate the removal of heavy metals by using Hydroxyapatite(HAp) made from waste oyster shells and wastewater with high concentration of phosphorus. The maximum calcium concentration for the production of HAp in this study was released up to 361 mg/L at pH of 3 by elution experiments. When the pH was at adjusted 6, the maximum calcium released concentration was 41 mg/L. During the elution experiment, most of the calcium was released within 60 minutes. This reaction occurred at both pH levels of 3 and 6. The result of the XRD analysis for the HAp product used in this study shows the main constituent was HAp, as well as OCP. The pH was 8.6. As the temperature increased, the main constituent did not vary, however its structure was crystallized. When the pH was maintained at 3, the removal efficiency decreased as the heavy metal concentration increased. The order of removal efficiency was as follows: $Fe^{2+}$(92%), $Pb^{2+}$(92%) > $Cu^{2+}$(20%) > $Cd^{2+}$(0%). Most of these products were dissolved and did not produce sludge in the course of heavy metals removal. As the heavy metal concentration increased at pH of 6, the removal efficiency increased. The removal efficiencies in all heavy metals were over 80%. From the analysis of the sludge after reaction with heavy metals, the HAp was detected and the OCP peak was not observed. Moreover, lead ion was observed at the peaks of lead-Apatite and lead oxidant. In the case of cadmium, copper and iron ions, hydroxide forms of each ion were also detected.

• Journal of the Korean Society for Railway
• /
• v.12 no.6
• /
• pp.1059-1066
• /
• 2009

Recently, the amount of thermosetting plastic wastes has increased with the production of reinforced plastic composites and causes serious environmental problems. The epoxy resins, one of the versatile thermosetting plastics with excellent properties, cannot be melted down and remolded as what is done in the thermoplastic industry. In this research, a series of experiments that decompose epoxy resin and recover carbon fibers from carbon fiber reinforced epoxy composites applied to railway vehicles was performed. We experimentally examined various decomposition processes and compared their decomposition efficiencies and mechanical property of recovered carbon fibers. For the prevention of tangle of recovered carbon fibers, each composites specimen was fixed with a Teflon supporter and no mechanical mixing was applied. Decomposition products were analyzed by scanning electron microscope (SEM), gas chromatography mass spectrometer (GC-MS), and universal testing machine (UTM). Carbon fibers could be completely recovered from decomposition process using nitric acid aqueous solution, liquid-phase thermal cracking and pyrolysis. The tensile strength losses of the recovered carbon fibers were less than 4%.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.6 no.3
• /
• pp.399-405
• /
• 1996

The present buried contact (BC) solar cell research at SAIT includes the development of a processing sequence suitable for production of the single sided (SS) BC solar cells. This paper presents some results for large area ($45cm^{2}$) SSBC cells fabricated on FZ and CZ silicon substrates. Cell efficiencies in excess of 18% fabricated on FZ, p-type, 0.5 ohm-cm, and over 16% on CZ p-type, 10~20 ohm-cm, wafers have been demonstrated. Both the FZ and CZ wafers were chemically textured. These results are preliminary and the exploration of double sided (DS) sequence, which is the future BC structure would lead to over 17% and 20% efficiency cells on CZ and FZ substrates respectively. The cost of solar cells can be reduced further if the many high temperature steps can be reduced to only one. This would be very advantageous to very poor quality substrates such as the CZ grown wafers.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.13 no.4
• /
• pp.269-275
• /
• 1993

The performance of Upflow Anaerobic Sludge Blanket(UASB) reactor for treatment of corn starch wastewater was investigated using continuous and batch experiment. Results showed that the corn starch wastewater had different characteristics in terms of biodegradability and methane potential, depending on the manufacturing precess. COD removal efficiencies were maintained over 70% up to the loading rate of 3.2 kg $COD/m^3{\cdot}day$ and the maximum gas production rate was about 55 l/day, equivalent to 3.5 l/day per liter of reactor volume, at the loading rate of 8.4 kg $COD/m^3{\cdot}day$. In the anaerobic serum bottle test(SBT) carried out along with continuous operation, the sludge activity was found to increase from 0.03 to 0.53 g $COD-CH_4/g\;VSS{\cdot}day$ as granular sludges were developed in 130 days operation. SBT gave valuable informations on the characteristics of wastewaters to be treated as well as on the sludge activity. The overall morphological characteristics of granular sludges cultivated on corn starch wastewaters were similar to those cultivated on various organic industrial wastewaters such as distillery and sugar.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.4
• /
• pp.470-473
• /
• 2000

The experiment was carried out to evaluate the effect of varying levels of flaked com abomasally infused on energy metabolism and nitrogen metabolism in fattening steers. The starch levels of flaked corn of abomasally infused were 0, 300, 600 and 900 g/d. Four mature fattening steers fitted with permanent abomasum cannulas were allocated to a $4{\times}4$ Latin square design were fed at 1.2 maintenance requirement a basal diet of Chinese wildrye (Aneurolepidium Chinense). Compared with 0 g/d (control group), digestible nitrogen, retention nitrogen (RN, g/d) and the efficiency of digestible nitrogen converted into retention nitrogen (RN/DN, %) of 300, 600 and 900 g/d groups were higher (p<0.05). The post-ruminal starch digestion of flaked corn were 71.36, 80.27 and 64.71 % when the amounts abomasally infused were 300, 600 and 900 g/d, respectively. When the amount of starch abomasally infused was more than 600 g/d, the post-ruminal digestion of starch decreased. 300, 600 and 900 g/d starch infusion groups showed higher metabolizable energy intake (ME) and net energy gains (NEg, MJ/d) than the control group, and the efficiencies of metabolizable energy converted into body weight (Kf, %) of these groups were higher than the control group by 38.31, 73.18 and 67.06% (p<0.05). Kf (Y, %) had a positive curved relation to starch of flaked com abomasally infused (X, g/d), $Y=36.1605X^{0.0760}$ (n=16, r=0.9308).

• Journal of Environmental Health Sciences
• /
• v.24 no.2
• /
• pp.9-19
• /
• 1998

Laboratory experiments were carried out to investigate the performance of anaerobic sequencing batch reactor(ASBR) for digestion of a municipal sludge. Each cycle of the ASBR comprised feeding, two-or three-day reaction, one-day thickening, and withdrawal. The reactors were operated at an HRT of 10days and 5days with an equivalent organic loading rate of 0.8-1.54 gVS/l/d, 1.81-3.56 gVS/l/d at 35$\circ$C, respectively. Solids accumulation was remarkable in the ASBR during start-up period, and directly affected by settleable solids in the feed sludge. Floatation thickening occured in the ASBRs, and Solids profiles at the end of thickening step dramatically changed at solid-liquid interface. Slight difference in solids concentrations was observed within thickened sludge bed. Efficiencies through floatation thickening were comparable to that of additional thickening of the completely mixed control reactor. Average solids concentrations in the ASBRs were 2.2-2.6 times higher than that in the control throughout the total operation period. The dehydrogenase activity had a strong correlation with the solids concentration. Organics removals based on clarified effluent of the ASBRs were consistently above 86%. Remarkable increase in equivalent gas production of 27-52% was observed at the ASBRs compared with the control though the control and ASBRs showed similiar effluent quality. Thus, digestion of a municipal sludge was possible using the ASBR in spite of high concentration of solids in the sludge.

• Asian-Australasian Journal of Animal Sciences
• /
• v.25 no.4
• /
• pp.577-583
• /
• 2012

This study was carried out to investigate the supplemental effects of dietary garlic extract (GE) on growth performance of juvenile sterlet sturgeon (Acipenser ruthenus). The first experiment was designed to determine the optimum levels of garlic extract as growth promoter during 10 weeks. Three groups (two replicates/group) of 240 fish with mean body weight of 85 g were fed with diets containing 0 (control), 0.5 and 1.0% of GE. The highest weight gain (%) and feed efficiency (%) were found in fish groups fed with diet containing 0.5% GE. Subsequently, the supplemental effects of dietary GE was studied on growth of juvenile sterlet sturgeon (Acipenser ruthenus) with an average body weight of 59.6 g. Fish cultured in freshwater were randomly allotted to each of 10 tanks (two groups of five replicates, 20 fish/tank) and fed diets with 0.5% GE or without GE (control), respectively, at the level of 2.0% of fish body weight per day for 5 weeks. Weight gain (51.1%), feed efficiency (79.1%), specific growth rate (1.18%) and protein efficiency ratio (1.50) of fish fed 0.5% GE were significantly (p<0.05) higher than those fish fed the control diet. Significantly higher protein (PRE 20.4%) and lipid retention efficiencies (LRE, 74.5%) were also found in 0.5% GE group (p<0.05). The present results suggested that dietary GE could improve growth and feed utilization of juvenile sterlet sturgeons.