• Journal of the Society of Naval Architects of Korea
• /
• v.28 no.1
• /
• pp.150-168
• /
• 1991

A practical procedure for the ultimate compressive strength-based safety and reliability assessment of the double skin upper deck structure is described. The external compressive stress acting on the upper deck structure which is due to the still water and wave-induced sagging moment is approximately estimated by using the existing rule of classification society. The ultimate compressive stress of double skin structure under the action of sagging moment is analyzed by using idealized structural unit method. Here an idealized plate element subjected to uniaxial load is formulated by idealizing the nonlinear behaviour of the actual element taking account of the initial imperfections in the form of initial deflection and welding residual stress. The interaction effect between the local and global failure in the structure is also taken into consideration. The accuracy of the present method is verified comparing with the present solution and the existing numerical and experimental results for unit member and welded box columns. The safety of the structure is evaluated using the concept of conventional central safety factor and the reliability assessment is made by using Cornel's MVFOSM method. The present procedure is then applied to upper deck structure of double skin product oil carrier. The influence of the initial imperfections and the yield stress of the material on the safety and reliability of the structure is investigated.

• Korean Journal of Health Education and Promotion
• /
• v.24 no.4
• /
• pp.41-64
• /
• 2007

Objectives: The purpose of this study was to verify the validity of the evaluation indicators on safety and health education programs provided to Korean industrial workers, by developing further. Methods: To develop the early evaluation indicator, the secondary analysis was made on 'Survey on Industrial safety & health trends', the national wide survey data product by Korea Occupational Safety & Health Agency, as well as the various examinations on literatures. To validate such developed evaluation indicator, 13 safety and health managers in Focus Group discussion to prove the reliability of the contents were composed. To confirm the face validity, the interview with 6 industrial safety and health education experts was held to study the appropriateness of the content. With the cooperation from Korea Occupational Safety & Health Agency, the structured survey was performed with the safety and health managers from 588 businesses who participated in the education program for the later half of 2006. In this study, the number of responses was randomly divided into 1:1 two groups, in which one group was for the Exploratory Factor Analysis and the other group was for the Confirmatory Factor Analysis. Results: The results were as follows. First, for the Structure category, 18 evaluation indicators were developed into 4 evaluation categories such as a preliminary examination, education staff and organization, education environment and rules/ regulation. Secondly, the Activity category was comprised of 10 evaluation indicators with respect to 2 areas of curriculum satisfaction and program evaluation. Finally, for the Output category, 9 evaluation indicators were developed into 2 evaluation areas such as documentation and information share and education effects. Conclusions: The evaluation indicators developed through this study will possibly develop and be applied to evaluation tools on safety and health education program, which may further become the standardized indicators to better operate the industrial safety and health education programs.

• Journal of Distribution Science
• /
• v.11 no.6
• /
• pp.67-80
• /
• 2013

Purpose - This study aims to establish the relationships among brand equity, brand attitudes, and Visual Merchandising (VMD) in bakery stores. The results will help bakery franchisees and franchisers in devising appropriate strategies for successfully managing their bakery shops. Research design, data, and methodology - The VMD model for bakery shops comprises harmony, attractiveness, suitability, pandemic, functionality, and reliability. Further, brand equity encompasses brand awareness, perceived quality, and brand image. In this study, the VMD factors of bakery shops are used as independent variables, while brand equity and brand attitude are used as dependent variables. This study aims to ascertain the extent of the influence VMD components of bakery shops have on brand equity and brand attitude. Regression analysis was used to verify those effects. The measurement items, deemed reliable and valid in a previous study, were modified for this study. Questionnaires were distributed to 500 consumers nationwide, of whom 340 were used for the sample. The SPSS 19.0 statistical program was used for the analysis. Results - First, among the VMD bakery shop components, harmony, attractiveness, and pandemic have a positive impact on brand equity (brand awareness and brand image). Second, amongst the VMD components of bakery shops, attractiveness, pandemic, and reliability have a positive impact on brand equity (perceived quality). Third, amongst the VMD components of bakery shops, harmony, attractiveness, and reliability have a positive impact on brand attitude. Fourth, brand equity (brand awareness, brand image, and perceived quality) have a positive effect on brand attitude. Conclusions - This study identifies the relationships between the VMD components of a bakery shop and brand equity and attitude in order to propose a new model. The study has several practical implications. First, the development of brand equity and management can be important components in bakery shops' determination of whether their VMD components have an impact on brand equity. Second, among VMD components, harmony and attractiveness have a positive influence on the choice of bakery shop, while reliability and pandemic have a partly positive influence on the choice of bakery shop. Therefore, store atmospheres should be attractively designed, and store menus and interiors should be reviewed periodically to conform to the latest trends. This study suggests marketing strategies for brand equity formation. First, providing collateral product quality, hygiene, and safety benefits as well as product offerings to complement the season and employees' services should be considered. Second, display methods, illumination designs, and new product ideas should be periodically reviewed. Third, these should complement the overall harmony of the interior and exterior and of the store atmosphere in order to be attractive. Funds should thus be dedicated specifically for the facilities and their interiors. Fourth, it is necessary to build a friendly and relaxed image that can be easily called to mind by the customers.

• Journal of the Ergonomics Society of Korea
• /
• v.33 no.5
• /
• pp.407-422
• /
• 2014

Objective: The purpose of the study is to develop quantitative usability evaluation criteria for senior-friendly autonomous transportation robot. Background: The Republic of Korea has become the most rapidly aging society, and is anticipated to enter the post-aged society in 2026. To raise the quality of life of a senior with limited mobility and to reduce the burden of caregivers, many high-tech assistive products with information technologies are developed nowadays. The senior-friendly autonomous transportation robot is one person robot vehicle to move a senior to the destination for hospitals, nursing homes or silver town complex. With built-in navigation system and environmental monitoring censors, it automatically seeks the path to the destination and avoids collision to obstacles and pedestrians on the way. Due to the early stage of the product, few usability studies in this field have been done, mostly on general service robots to assist seniors, power wheelchairs and delivery robots. ISO and KS standards for the service robots are focused on safety. Method: Based on the reference usability index, the early draft of the usability evaluation questionnaires was developed. After small group tests and interviews, the experts modified the initial draft to the Usability Evaluation Criteria for Senior-Friendly Autonomous Transportation Robot (UEC-SFATR). Result: UEC-SFATR consisted of 4 subscales - Safety, Controllability, Efficiency and Satisfaction. All of the 4 subscales of UEC-SFATR were passed the reliability criteria by 4 groups of seniors, divided by gender and familiarity of smart-devices. Conclusion: UEC-SFATR covers wider area of user experiences of the SFATR and is a good measurement tool to help both the users and developers of the robot. Application: This study provides guide to the future product development and product competitiveness evaluation by quantifying user experiences for the SFATR.

• Physical Therapy Rehabilitation Science
• /
• v.11 no.4
• /
• pp.414-420
• /
• 2022

Objective: In this study, the test-retest reliability and validity were presented to evaluate the usability of isokinetic rehabilitation equipment for the knee joint. Design: Cross-sectional design, reliability & validity study. Methods: Thirty healthy adults participated in the study. A CSMI dynamometer was used as a standardized measuring device to present the validity of the equipment. It was measured based on the dominant leg. The average peak torque value was selected as the measurement variable. After the measurement, a questionnaire was conducted on safety, satisfaction, and performance through the usability evaluation questionnaire. Results: The knee joint isokinetic rehabilitation equipment showed high reliability with Intraclass Correlations Coefficients (ICC) =0.883~0.956. In order to check the validity of the equipment, the 95% confidence interval of the mean difference limit was confirmed by the Bland & Altman plot. As a result, all three angular velocities showed a smaller confidence interval in the flexion than in extension. There were less than 10 plots that were not included in 2 Standard Deviation (SD) between all measurements. As a result of the usability evaluation questionnaire, the average of the safety domain(4.9±0.4), satisfaction domain(4.1±0.8), performance domain(4.3±0.8). Conclusions: If the product is improved by supplementing the items identified in the usability evaluation process, it is judged that it can be used as a useful device in various knee joint rehabilitation fields.

• Geotechnical Engineering
• /
• v.4 no.2
• /
• pp.5-14
• /
• 1988

A probabilistic model for the progressive failure in a homogeneous soil slope consisting of strain-softening material is presented. The local safety margin of any slice above failure surface is assumed to follow a normal distribution. Uncertainties of the shear strength along potential failure surface are expressed by one-dimensional random field models. In this paper, only the case where failure initiates at toe and propagates up to the crest is considerd. The joint distribution of the safety margin of any two adjacent slices above the failure surface is assumed to be bivariate normal. The overall probability of the sliding failure is expressed as a product of probabilities of a series of conditional el.eats. Finally, the developed procedure has been applied in a case study to yield the reliability of a cut slope.

• Journal of Welding and Joining
• /
• v.34 no.1
• /
• pp.26-34
• /
• 2016

Automotive today has been transforming to an electronic product by adopting a lot of convenience and safety features, suggesting that joining materials and their mechanical reliabilities are getting more important. In this study, a Sn-Cu-Cr-Ca solder composition having a high melting temperature ($>230^{\circ}C$) was fabricated and its joint properties and reliability was investigated with an aim to evaluate the suitability as a joining material for electronics of engine room. Furthermore, mechanical properties change under complex environment were compared with several existing solder compositions. As a result of contact angle measurement, favorable spreadability of 84% was shown and the average shear strength manufactured with corresponding composition solder paste was $1.9kg/mm^2$. Also, thermo-mechanical reliability by thermal shock and vibration test was compared with that of the representative high temperature solder materials such as Sn-3.5Ag, Sn-0.7Cu, and Sn-5.0Sb. In order to fabricate the test module, solder balls were made in joints with ENIG-finished BGA and then the BGA chip was reflowed on the OPS-finished PCB pattern. During the environmental tests, resistance change was continuously monitored and the joint strength was examined after tests. Sn-3.5Ag alloy exhibited the biggest degradation rate in resistance and shear stress and Sn-0.7Cu resulted in a relatively stable reliability against thermo-mechanical stress coming from thermal shock and vibration.

• Journal of IKEEE
• /
• v.25 no.3
• /
• pp.578-583
• /
• 2021

This paper describes acceleration tests for reliability of semiconductors. It also describes AEC-Q100, international test standard for reliability of automotive semiconductors. Semiconductors can be used for dozens of years. So acceleration tests are essential to test potential problems over whole period of product where test time is minimized by applying intensive stresses. AEC-Q100 is a typical acceleration test in automotive semiconductors, and it is designed to find various failures in semiconductors and to analyze their causes of occurance. So it finds many problems in design and fabrication as well as it predicts lifetime and reliability of semiconductors. AEC-Q100 consists of 7 test groups such as accelerated environmental stress tests, accelerated lifetime simulation tests, package assembly integrity tests, die fabrication reliability tests, electrical verification tests, defect screening tests, and cavity package integrity tests. It has 4 grades from grade 0 to grade 3 based on operational temperature. AEC-Q101, Q102, Q103, Q104, and Q200 are applied to discrete semiconductors, optoelectronic semiconductors, sensors, multichip modules, and passive components, respectively.

• Journal of Radiation Protection and Research
• /
• v.41 no.1
• /
• pp.57-70
• /
• 2016

Background: Since the terminology 'radioactive consumer product' is not quite familiar to the public and is often considered as negative and detrimental things, the educational curriculum is essential for establishing reliability of nuclear energy related and for the development of better communication strategy of radiation risk with the public. To provide base data which is valuable for establishing efficient curriculum of education and training about radiation safety, it is necessary to apprehend the different level of awareness of radiation exposures classified by various consumer products. Materials and Methods: On November 2014, a question investigation about asking awareness level of radiation exposure from various consumer products was done for university students who are highly educated. The object students are studied at a four-year-course universities which is located at Daejeon City. Results and Discussion: Although the average awareness level is comparatively low, the awareness of senior students, who major in radiation, nuclear related departments and male students are relatively high. On the other hand, the awareness of freshman, sophomore, junior students, who do not major in radiation, nuclear related departments and female students are relatively low. It is necessary to provide various information to avoid unnecessary concerns and misconceptions about radiation exposure. Conclusion: This paper will be an instrument for efficient establishment of curriculum of education and training related with radiation safety.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.99-99
• /
• 2011

Fuel cell systems are a completely different form of electricity source that has been used so far and is an aggregation of multiple technologies with multidisciplinary features that can be operated safely only when gas and electrical safety are being considered. Since fuel cells generate through electrochemical reactions there are difficulties in ensuring electricity safety, power quality assessment, effective control and reliability standards for system faults using conventional inspection techniques and even though they are necessary as a primary means for reduction of CO2 owing to the Climate Convention, electrical safety assessment and measures are required for the prevention of faults in residential facilities. Although small-scaled distributed power supplies can be utilized as important means of peak control and energy management measures, research is required for observing the effects on the system and the development of inspection technology to ensure stable operation, and the electrical safety of residential fuel cell systems need to be assessed and the problems derived for establishing electrical safety standards. From the year 2002, Japan has established laws on technical safety standards and development and rules on the product specifications and standards for the industrialization of hydrogen fuel cells. Also, a lot of effort have been made for the commercialization of fuel cells by building one-stop certification services. Internationally, the IEC TC 105 has established international standards based on fuel cells. In order to protect the national interest, the country should be able to respond accordingly meet global standards. In fact, in Korea, to comply with the international trend, Korea Energy Management Corporation is establishing a certified agenda for fuel cells and Korean Agency for Technology and Standards is enacting technical standards for fuel cells. The current terms of fuel cells are that research has been focused more on the quality and performance of manufactured products rather than stable power operation and maintenance over time. In this paper, by considering the household fuel cell as a power device, the safety standards of the fuel cell system for a reliable operation with the existing power system is being proposed.