• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1993.06a
• /
• pp.975-976
• /
• 1993

This talk presents the overview of the author's research and development activities on fuzzy inference hardware. We involved it with two distinct approaches. The first approach is to use application specific integrated circuits (ASIC) technology. The fuzzy inference method is directly implemented in silicon. The second approach, which is in its preliminary stage, is to use more conventional microprocessor architecture. Here, we use a quantitative technique used by designer of reduced instruction set computer (RISC) to modify an architecture of a microprocessor. In the ASIC approach, we implemented the most widely used fuzzy inference mechanism directly on silicon. The mechanism is beaded on a max-min compositional rule of inference, and Mandami's method of fuzzy implication. The two VLSI fuzzy inference chips are designed, fabricated, and fully tested. Both used a full-custom CMOS technology. The second and more claborate chip was designed at the University of North Carolina(U C) in cooperation with MCNC. Both VLSI chips had muliple datapaths for rule digital fuzzy inference chips had multiple datapaths for rule evaluation, and they executed multiple fuzzy if-then rules in parallel. The AT & T chip is the first digital fuzzy inference chip in the world. It ran with a 20 MHz clock cycle and achieved an approximately 80.000 Fuzzy Logical inferences Per Second (FLIPS). It stored and executed 16 fuzzy if-then rules. Since it was designed as a proof of concept prototype chip, it had minimal amount of peripheral logic for system integration. UNC/MCNC chip consists of 688,131 transistors of which 476,160 are used for RAM memory. It ran with a 10 MHz clock cycle. The chip has a 3-staged pipeline and initiates a computation of new inference every 64 cycle. This chip achieved an approximately 160,000 FLIPS. The new architecture have the following important improvements from the AT & T chip: Programmable rule set memory (RAM). On-chip fuzzification operation by a table lookup method. On-chip defuzzification operation by a centroid method. Reconfigurable architecture for processing two rule formats. RAM/datapath redundancy for higher yield It can store and execute 51 if-then rule of the following format: IF A and B and C and D Then Do E, and Then Do F. With this format, the chip takes four inputs and produces two outputs. By software reconfiguration, it can store and execute 102 if-then rules of the following simpler format using the same datapath: IF A and B Then Do E. With this format the chip takes two inputs and produces one outputs. We have built two VME-bus board systems based on this chip for Oak Ridge National Laboratory (ORNL). The board is now installed in a robot at ORNL. Researchers uses this board for experiment in autonomous robot navigation. The Fuzzy Logic system board places the Fuzzy chip into a VMEbus environment. High level C language functions hide the operational details of the board from the applications programme . The programmer treats rule memories and fuzzification function memories as local structures passed as parameters to the C functions. ASIC fuzzy inference hardware is extremely fast, but they are limited in generality. Many aspects of the design are limited or fixed. We have proposed to designing a are limited or fixed. We have proposed to designing a fuzzy information processor as an application specific processor using a quantitative approach. The quantitative approach was developed by RISC designers. In effect, we are interested in evaluating the effectiveness of a specialized RISC processor for fuzzy information processing. As the first step, we measured the possible speed-up of a fuzzy inference program based on if-then rules by an introduction of specialized instructions, i.e., min and max instructions. The minimum and maximum operations are heavily used in fuzzy logic applications as fuzzy intersection and union. We performed measurements using a MIPS R3000 as a base micropro essor. The initial result is encouraging. We can achieve as high as a 2.5 increase in inference speed if the R3000 had min and max instructions. Also, they are useful for speeding up other fuzzy operations such as bounded product and bounded sum. The embedded processor's main task is to control some device or process. It usually runs a single or a embedded processer to create an embedded processor for fuzzy control is very effective. Table I shows the measured speed of the inference by a MIPS R3000 microprocessor, a fictitious MIPS R3000 microprocessor with min and max instructions, and a UNC/MCNC ASIC fuzzy inference chip. The software that used on microprocessors is a simulator of the ASIC chip. The first row is the computation time in seconds of 6000 inferences using 51 rules where each fuzzy set is represented by an array of 64 elements. The second row is the time required to perform a single inference. The last row is the fuzzy logical inferences per second (FLIPS) measured for ach device. There is a large gap in run time between the ASIC and software approaches even if we resort to a specialized fuzzy microprocessor. As for design time and cost, these two approaches represent two extremes. An ASIC approach is extremely expensive. It is, therefore, an important research topic to design a specialized computing architecture for fuzzy applications that falls between these two extremes both in run time and design time/cost. TABLEI INFERENCE TIME BY 51 RULES {{{{Time }}{{MIPS R3000 }}{{ASIC }}{{Regular }}{{With min/mix }}{{6000 inference 1 inference FLIPS }}{{125s 20.8ms 48 }}{{49s 8.2ms 122 }}{{0.0038s 6.4㎲ 156,250 }} }}

• Journal of the Korean association of regional geographers
• /
• v.4 no.1
• /
• pp.99-120
• /
• 1998

The purpose of this study is to clarify the industrialization process, and locational factors and linkages of manufacturing in Jangyu-Myun, a suburb of Metropolitan Pusan, toward which heavy decentralization of manufacturing from Pusan has been done. Hard data and soft data were used as the basic data. Hard data used for this study were both the statistical data which consists of the number of establishments and employee classified by product type, firm size, organizational type and unit area(dong) which were listed in statistics yearbooks, and the list of the owner's names, addresses, employee number, products and headquarters of firms which were listed in firm directories. Soft data were the results of the interviews with the 53 owners of firms surveyed among the firms selected by Proportional Stratified Sampling Method. The major findings were as follows: (1) Manufacturing location in Jangyu-Myun was regularized in 1980's in which decentralization of manufacturing was activiated. Though the industrialization of study area resulted from the birth, relocation and establishment of branches of the firms originated from the other regions, the relocation of small outer-oriented firms from the central city was the most important factor among them. (2) The main locational factors which induced the decentralizing manufacturing from the central city into Jangyu-Myun are closely related to land, transportation, personal factor, raw material suppliers and market. (3) The differences of important locational factors by the size and organizational type of firms are relevant to the characteristics of manufacturing location. (4) The changes of linkages attendant upon locational changes of firms were not so great and were localized in labor supply and marketing. (5) The strength of linkages is strong in the procurement of materials, in the subcontraction and in the marketing, but not in the ordering. (6) The main factors influencing on the formation of linkages are different by the types of linkages: monopolistic and oligopolistic supply are important in procurement linkages; characteristics of products and production capacity in the subcontraction and ordering; characteristics of products and the subsequent difficulties, in the marketing. (7) With the exception of procurement linkages, the strength of linkages with the outside of the study area are stronger than the linkages with the inside. The strength of linkages with the outside has distance-decay-function and strong linkages with the central city. (8) These spatial characteristics of linkages are different by products type, firm size and organizational type of firms: the spatial ranges of linkages are wider in the multi-location firms than in the single-location firms; the larger the firm size, the wider the spatial range of linkages: there is no consistent trend by products type. In conclusion, some facts described above were proved to be consistent with the results of proceeding studies in the other areas: influence of central city manufacturing relocation on industrialization in the suburb: different decentralization by products type, firm size and organizational types of firms: different locational factors by products type, firm size and organizational types of firms; linkage changes attendant upon locational changes of firms; spatial differences of linkages by products type, firm size and organizational type of firms. Some other factors were proved to be partly consistent: locational factors and spatial characteristics of linkages. Accordingly I think that the results of previous studies on the other areas can be applicable to the explanation of the location and linkage of manufacturing in Jangyu-Myun. For the better explanation on the characteristics of manufacturing decentralization from the central city, more empirical case studies on the location and linkage of manufacturing in the suburb areas are necessary.

• Journal of the Korean association of regional geographers
• /
• v.3 no.1
• /
• pp.183-198
• /
• 1997

This case study was conducted by verification the site characteristics based on the questionnaire and interview obtained from the all factories located at No. 1 developing area in Kumi industrial complex. The site characteristics were presumed from the process of location behavior and spatial linkage. Kumi industrial complex was developed to improve export industry at national levels by providing chief land price and benefiting various tax. Kumi industrial complex which enticed many factories is playing an important role in export industry in Korea. At beginning, the detention of large enterprises promoted the establishment of related small to medium sized factories into the complex. Two distinctive industries. textile and electronic, were reflected by the purpose to establish the complex and industrial characteristics of Taegu city. respectively. In Kumi industrial complex, positive responses on traffic and raw material supply and negative reactions on the environmental impact on social community as well as high labor charge were investigated. Especially the higher labor cost prevented to hire laborers effectively. In the linkages of spatial and raw material, most factories in the complex depended on the availability of out side the Kumi city. For the textile factories, the supply of raw material and parts were relied on Taegu and/or other cities, whereas in electronic factories purchased them mainly from other cities and partly from abroad. Although questionnaire and interview suggested it, most of the parts were supplied by a parts maturing companies on the complex to a few large enterprises. In the marketing linkage, textile factories revealed higher relation-ship with the foreign countries and sewing factories in Korea. On the other hand, electronic factories have strong relation-ships in the marketing linkage to the parts supplying companies in the complex or large-scale resembling companies in other cities. In the textile companies, the right for decision on purchasing raw materials and parts is belonging to the owner whereas mother enterprise usually have the right for the marketing. In the case of the electronic factories, all the purchasing activities are related to the sub-contracting companies. In the service linkage, the Quality of the service created spatial distinction. There was high linkages on inside of Kumi complex for the low grade services such as repairing and installing machines, whereas strong linkages on outside of the complex for the high grade services such as management, law, taxation, new product development. and manufacturing technology. In the linkages of activity on the R&D (research and development), electronic factories do not have sufficiently qualified institutes in the complex. Strong regional linkages in the field of textile and electronic industries revealed limitations of the local industrial complex. In the sub-contracting linkage, high linkage ship within Kumi boundary reflected the characteristics of industrial site in the complex. There, most decisions by the companies centered by the mother enterprise.

• Archives of design research
• /
• v.17 no.3
• /
• pp.221-230
• /
• 2004

Design textbooks for general education bring our attention to the education of design as a part of whole education. In this vein, this thesis tried to analyze and discuss on the current status of design education contents included in the 7th educational curriculum of the Art & Life. This study had a historical review of the contents of arts education as well as a review of theoretical contents in art education. Also this thesis analyzed five types of Art & Life text books currently used at high schools with weight given to the design and to the status of pictorial coverage in the text books. Finally, the thesis presented problems of design education through a comparative analysis of high school arts education and design education. Through the analysis, inequality of design contents in education was reported. It was clearly attributable to the backgrounds of text book writers. For example, authors with graphic design backgrounds tended to lack product and environment design concepts, while hand craft section of text books all showed a biased contents towards traditional Korean arts. In the analysis of pictorial coverage, similar to the composition of academic contents, coverage was concentrated in the graphic design areas; inequality in quantity of pictures found with a ratio of 1 to 4. In terms of areas of arts, design contents in text books were concentrated only in arts creation chapters among the 3 major areas of arts appreciation, understanding, and creation. Design education is attained in an atmosphere of creativity and the provision of ample teaching material. It is because diverse contents will generate the development of arts. When compared to design education curriculum of U.S. and Japan, these creativity put their focus of design education in the understanding and emotional contacts, so that every application is easily attained. In terms of expression learning, creativity and diversity of material are emphasized. From Kindergarten to middle, and high school periods, apparently the care contents of deign is emphasized. A textbook in the 7th education curriculum is one of the sources for education. In designing text books, learning process should be emphasized following subjects and natures of arts so that creativity can be achieved. Therefore, a systematic approach for design research and educational development for material would be needed in textbook design.

• Journal of Technology Innovation
• /
• v.17 no.2
• /
• pp.55-80
• /
• 2009

Technology innovation activity plays a pivotal role in constructing the entrance barrier for other firms and making process improvement and new product. and these activities give a profit increase and growth to firms. Thus, technology innovation activity can reduce the default risk of firms. However, technology innovation activity can also increase the firm's default risk because technology innovation activity requires too much investment of the firm's resources and has the uncertainty on success. The purpose of this study is to examine the effect of technology innovation activity on the default risk of firms. This study's sample consists of manufacturing firms listed on the Korea Securities Market and The Kosdaq Market from January 1,2000 to December 31, 2008. This study makes use of R&D intensity as an proxy variable of technology innovation activity. The default probability which proxies the default risk of firms is measured by the Merton's(l974) debt pricing model. The main empirical results are as follows. First, from the empirical results, it is found that technology innovation activity has a negative and significant effect on the default risk of firms independent of the Korea Securities Market and Kosdaq Market. In other words, technology innovation activity reduces the default risk of firms. Second, technology innovation activity reduces the default risk of firms independent of firm size, firm age, and credit score. Third, the results of robust analysis also show that technology innovation activity is the important factor which decreases the default risk of firms. These results imply that a manager must show continuous interest and investment in technology innovation activity of one's firm. And a policymaker also need design an economic policy to promote the technology innovation activity of firms.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.18 no.4
• /
• pp.186-194
• /
• 2013

We investigated the concentrations and distribution patterns of 17 polychlorinated dibenzo-p-dioxins/dibenzofurans(PCDD/Fs), 12 dioxin-like polychlorinated biphenyls(DL-PCBs) and 24 polybrominated diphenyl ethers(PBDEs) in sediments from Ulsan Bay in Korea. The concentrations of PCDD/Fs, DL-PCBs, and PBDEs in 33 sediment samples ranged from 0.11 to 4.86($1.81{\pm}1.04$) pg $WHO_{2005}$-TEQ $g^{-1}$ dry weight(dw), 0.06 to 44.2($4.02{\pm}7.99$) pg $WHO_{2005}$-TEQ $g^{-1}$ dw, and 2.81 to 63.8($19.4{\pm}13.9$) ng $g^{-1}$ dw, respectively. DL-PCBs had dominant contributions(mean, 88%) of total TEQ concentrations in sediment. The concentrations of target compounds in inner locations were higher than those in outer locations in Ulsan Bay (p<0.05). The dominant contribution of highly chlorinated DD/Fs in sediment was associated with combustion process from industrial complexes. Distribution pattern of DL-PCBs was similar with those of commercial PCB products. BDE209 was a dominant congener in sediment, suggesting high use amount of commercial deca-BDE product in surrounding areas.

• Food Science of Animal Resources
• /
• v.27 no.4
• /
• pp.531-537
• /
• 2007

Small amounts of trans fatty acids exist naturally in beef and dairy foods. Also, they can be produced in the process of partial hydrogenation to manufacture shortning or margarine. They can provide a better palatability and shelf life. According to the recently studies, trans fatty acids can raise health risk such as heart diseases and coronary artery diseases. They can also increase low-density lipoprotein (LDL) cholesterol and decrease high-density lipoprotein (HDL) cholesterol in the blood plasma, therefore increasing the risk of atherosclerosis and diabetes. The aim of this study was to determine total lipids and trans fatty acids (TFAs) content in processed foods and meat products. The analysis of trans fatty acids was performed in 28 samples of donuts, 18 samples of bakeries, 4 samples of frozen doughs, 2 samples of popcorns, and 4 samples of meat products (ham, sausage, nuget, and bacon). Total lipids in processed foods and meat products were extracted by chloroform-Methanol method and acid digestion, respectively. They were analyzed by gas chromatography using a SP-2560 column and flame ionization detector. The amounts of TFAs per 100 g of foods were 0-3.3% (0.74% on average) in donuts, 0.2-5.8% (1.18% on average) in bakeries, 0.2-6.3% (1.93% on average) in frozen doughs, and 0-5.8% in popcorns. Meat products such as ham, sausage, and nuget analyzed 0.1% of TFAs, respectively and trans fatty acids in bacon were not detected. As a result, the distribution of TFAs in processed foods was widely ranged from O% to 6.3% according to manufacturers and types of products, whereas the content of TFAs in meat products ranged from 0% to 0.1%.

• Review of Culture and Economy
• /
• v.21 no.2
• /
• pp.141-173
• /
• 2018

In this article, we explore how artistic fame is formed by analyzing antecedents of fame the extent to which the name of an actor or his/her work is positively known by his/her audiences among Korean handicraft artists. Drawing on prior literature on reputation and fame, we clarify the differences between the concept of reputation and the concept of fame and further distinguish three types of reputation among individual artists, depending on its sources expert reputation, market reputation, and peer reputation. We employ the mixed method in this study, in which we first conducted open-end interviews with three kinds of constituents (i.e., critics, market intermediaries, and artists) and then developed and tested the hypotheses derived from the insights we had obtained from the interviews. We further considered the impact of reputational work, defined as the level of effort devoted and activities performed by an artist him(her)self geared toward promoting his(her) work, on artistic fame. We find that there are large differences in factors associated with artistic fame between non elite and elite Korean handicraft artist groups, where elite status is captured by artists' educational background (i.e., Seoul National University and Hongik University, which are considered elite schools in accordance with prior research). Specifically, findings suggest that among non elite status artists, recognition by experts, or what we call expert reputation, acquired through national awards and invitations from prominent exhibitions as well as artists' own reputational work that incurs high cost, such as self-financed exhibition openings, were shown to be highly significant factors associated with artistic fame, which was measured as the number of media exposures related to her/his art work. By contrast, among elite status artists, peer reputation acquired through an artist's institutional affiliations and relatively low cost artists' own reputational work, such as self listing on a highly publicized magazine, were shown to be significant factors associated with fame. Taken together, this paper contributes to research on cultural industries and markets by highlighting the importance of understanding artistic fame not just as the outcome of her/his talent but as the social product that arises at the intersection of actors (artists) and her/his audiences in the social evaluation process.

• Journal of Legislation Research
• /
• no.53
• /
• pp.593-631
• /
• 2017

Like the technological competition of each country around commercialization of Autonomous Vehicles(the rest is 'AV'), legalizations are also in a competition. However, in the midst of this competition, the Ethik-Kommission Automatisiertes und vernetztes Fahren of Germany has recently introduced 20 guidelines. This guideline is expected to serve as a milestone for future AV legislations. In this paper, I have formulated a new legislative proposal that will incorporate the main content presented by the Ethik-Kommission. The structure is largely divided into general rules of purpose and definition, chapter on types of AV and safety standards, registration and inspection, maintenance, licenses for AV, driver's obligations, insurance and accident responsibilities, roads and facilities, traffic system, and chapter on penalties. The commercialization of AV in Korea seems to be in a distant future, and it is possible to pretend that it is not necessary to prepare legal systems. But considering our reality, leading legislation may be necessary. In this paper, I have prepared individual legislative proposals based on the essential matters based on the criminal responsibility in case of AV car accidents. To assure the safety of AV, AV and mode of operation were defined for more clear interpretation and application of law, and basic safety standards for AV were presented. In addition, the obligation of insurance and the liability for damages were defined, and the possibility of immunity from the criminal responsibility was examined. Furthermore, I have examined the penalties for penalties such as hacking in order to secure the effectiveness of the Act. Based on these discussions, I have attempted the 'Autonomous Vehicles Act', which aims to provide a basis for new discussions to be held on the basis of various academic fields related to the operation of AV and related industries in the future. Although there may be a sense of unurgency in time, the automobile industry needs time to prepare for the regulation of the AV ahead of time. And a process of public debate is also needed for the ecosystem of healthy AV industry.

• Journal of Ginseng Research
• /
• v.29 no.1
• /
• pp.1-18
• /
• 2005

Ginseng Radix, the root of Panax ginseng C. A. Meyer has been used in Eastern Asia for 2000 years as a tonic and restorative, promoting health and longevity. Two varieties are commercially available: white ginseng(Ginseng Radix Alba) is produced by air-drying the root, while red ginseng(Ginseng Radix Rubra) is produced by steaming the root followed by drying. These two varieties of different processing have somewhat differences by heat processing between them. During the heat processing for preparing red ginseng, it has been found to exhibit inactivation of catabolic enzymes, thereby preventing deterioration of ginseng quality and the increased antioxidant-like substances which inhibit lipid peroxide formation, and also good gastro-intestinal absorption by gelatinization of starch. Moreover, studies of changes in ginsenosides composition due to different processing of ginseng roots have been undertaken. The results obtained showed that red ginseng differ from white ginseng due to the lack of acidic malonyl-ginsenosides. The heating procedure in red ginseng was proved to degrade the thermally unstable malonyl-ginsenoside into corresponding netural ginsenosides. Also the steaming process of red ginseng causes degradation or transformation of neutral ginsenosides. Ginsenosides $Rh_2,\;Rh_4,\;Rs_3,\;Rs_4\;and\;Rg_5$, found only in red ginseng, have been known to be hydrolyzed products derived from original saponin by heat processing, responsible for inhibitory effects on the growth of cancer cells through the induction of apoptosis. 20(S)-ginsenoside $Rg_3$ was also formed in red ginseng and was shown to exhibit vasorelaxation properties, antimetastatic activities, and anti-platelet aggregation activity. Recently, steamed red ginseng at high temperature was shown to provide enhance the yield of ginsenosides $Rg_3\;and\;Rg_5$ characteristic of red ginseng Additionally, one of non-saponin constituents, panaxytriol, was found to be structually transformed from polyacetylenic alcohol(panaxydol) showing cytotoxicity during the preparation of red ginseng and also maltol, antioxidant maillard product, from maltose and arginyl-fructosyl-glucose, amino acid derivative, from arginine and maltose. In regard to the in vitro and in vivo comparative biological activities, red ginseng was reported to show more potent activities on the antioxidant effect, anticarcinogenic effect and ameliorative effect on blood circulation than those of white ginseng. In oriental medicine, the ability of red ginseng to supplement the vacancy(허) was known to be relatively stronger than that of white ginseng, but very few are known on its comparative clinical studies. Further investigation on the preclinical and clinical experiments are needed to show the differences of indications and efficacies between red and white ginsengs on the basis of oriental medicines.