• Journal of the Korea Society for Simulation
• /
• v.11 no.4
• /
• pp.69-80
• /
• 2002

This study deals with the productivity improvement on a flow production system with the consideration of line-balancing. In a flow production system, similar product models are produced on a same assembly line, the predefined process order and the limitation of total worker number. The system can be increased the work-in -process(WIP) inventory and the worker's idle time. In this study, the worker assignment model is developed to assign evenly workload of process to each product model in such a manner that each process has the different number of worker. This worker assignment model is the mathematical model that determines worker number in each process such that the idle time of processes is reduced and the utilization of worker is improved. We use a simulation technique to simulate the production line proposed by the mathematical model and apply real production line. With the result of simulation, this study analyzes the propriety of production line and proposes the alternatives of new production line

• Journal of the Korean Society of Industry Convergence
• /
• v.19 no.4
• /
• pp.231-236
• /
• 2016

In this study, Green apple from Mungyeong area was used as material in the fermentation process. In apple fruit growing process, to produce a high quality apple fruit, some Green apple should be removed. Since the removed Green apple fruit is inedible, it doesn't have any economical value. To solve this problem, this paper proposed fermentation process to increase the economical value of raw apple as a fermentation product. This research conducted seven days, and the pH and brix value analysis was done every 12 hours during fermentation process. The experimental results show that the fermentation product under blender treatment is better than cutting treatment and without cutting treatment. Initial brix 25% is the best treatment for fermentation because produce fermentation product with a good taste and aroma than other treatment.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2004.06a
• /
• pp.278-284
• /
• 2004

The processes for the smelting of a metal product and the solidification of a molten salt were developed respectively to treat the products from the electrochemical reduction process. The method for the separation of a metal product in a magnesia container from the residual. salt and consequent smelting of it to a metal ingot by the multi step heating in vacuum was proposed. The new concept using a dual vessel and a salt valve was also suggested for the solidification of a molten salt into a regular size and shape which is suitable for the transport and measurement. The results obtained in the study will be applied to the design of the hot cell demonstration system of the Advanced Spent Fuel Conditioning Process of KAERI.

• Design & Manufacturing
• /
• v.2 no.6
• /
• pp.49-55
• /
• 2008

Double-injection molding can inject two different materials or two colors in the same mold and process. If this injection process use, product has ability because the base part maintain strength and specified part can inject soft-material. It makes the cost down by single operation automatically for saving wages. In this paper, we designed double-injection mold for automobile remote control to inject secondary using this part as insert after inject external appearance of product. CAE analysis was progressed gate location and runner size as variable and analysis result is reflected in mold design process. As a result, it could solved badness that is generated at the conventional mold. Additionally, cost is downed by reducing loss of runner as well as could omit painting process because surface of finished product is improved through new mold.

• Korean Journal of Computational Design and Engineering
• /
• v.16 no.5
• /
• pp.351-360
• /
• 2011

Product systems are quickly and frequently changed because Product Life Cycle is continuously reduced and adopting new product is steadily fast. Thus, various studies are progressed using simulation which is one of digital manufacturing. The research that is concerning simulation of control verification for shorten the commissioning which has a lot of trial and error is in progress. Also, simulation of control verification has strength that it can catch the errors in advance. However, a control program in simulation needs virtual factory for representation of control information. For this reason, excessive time and energy is put into controlling the virtual factory. So, in this paper, we construct library which is using exist data, in order to overcome limitation of these problems. Furthermore, we suggest methodology which can model and verify the process more speedy using library. Especially, we give body to the BB/BR Line process which has many altering equipment and need high technology effectively using physical and logical modeling. We can set up a control simulation environment very rapidly, as well as cut process time down using our suggestion.

• The Research Journal of the Costume Culture
• /
• v.21 no.1
• /
• pp.117-128
• /
• 2013

Studies show that time pressure affects the purchase decision-making process of consumers. However, in the case of apparel shopping, few studies have looked into the influence of time pressure on the purchase decision-making process. This study aims to determine how perceived time pressure in apparel shopping, time pressure situations, and product type and the interactions between these variables influence the clothing purchase process. An empirical study was conducted among males and females in their 20s and 30s. Perceived time pressure in apparel shopping was measured using four items. Time pressure situations and product types were given in the form of scenarios. A $2{\times}2{\times}2$ experimental design was used, and perceived time pressure in apparel shopping, time pressure situations, and product type were used to create eight different situations. The dependent variables included decision-making speed, anticipated regret, and anticipated purchase satisfaction. Data from 512 subjects were collected through an online data collection. Results showed that the high perceived time pressure group and the shopping situation with time pressure involved a significantly high level of decision-making time, anticipated regret, and anticipated purchase satisfaction. Marketers must understand the real-time pressure situations of consumers.

• Journal of Fashion Business
• /
• v.6 no.5
• /
• pp.112-124
• /
• 2002

Japanese apparel industries have deployed the activities of plannings, production & sellings by brand marketings. Owing to it, they satisfied customers and accomplished the goal of corporation objective market advantage. All through this process it is very essential to establish the concept of product Through the analysis of the brand development in Japanese total apparel corporation; 1) it accesses synthetically to acquire sales and target benefit by active marketing based on the analysis of market environment; 2) on relation with customer, it comes close to customer in the process of buying and consuming product and provides a customer satisfaction in the process of those. All the way of the process above and the precedent, it is to complete the goal of corporation. The development of the brand in Japanese apparel corporation depends on the corporate's customeroriented marketing. Due to it, Japanese apparel corporation perceives the differentiation that the consuming pattern of customer is its life style so that Japanese apparel corporation provides the product that can satisfy customer needs.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.44 no.1
• /
• pp.175-191
• /
• 2020

This study proposes an entrepreneurship education process for fashion product start-ups through rewards-based crowdfunding. It examines issues such as: the general concept of crowdfunding and the pros and cons of rewards-based crowdfunding, the detailed curriculum plans in a chronological order for the regular class development, and the presentation of a visual plan to show the whole process. An entrepreneurship education process is developed in 13 steps: research on crowdfunding market, prototype plan, prototype production, story development, visual contents development, rewards development, project evaluation, public schedule & service setting, period setting & start funding, community management (Q&A), funding ends & deposit, complete manufacturing & start delivering, and the final information disclosure & open the next project plan. This research is intended to investigate rewards-based crowdfunding as a new paradigm of entrepreneurship and apply entrepreneurship education in fashion product development. However, it is limited to studying the Wadiz crowdfunding platform in Korea. Therefore, we propose a case study on various crowdfunding platforms in Korea, a case study on entrepreneurial curriculum application, and a follow-up study on the possibility of entry into an overseas crowdfunding platform.

• Journal of the Korean Applied Science and Technology
• /
• v.27 no.4
• /
• pp.437-444
• /
• 2010

Dry Process(natural drying, hot-air drying, oil fry drying), optimized mixture ratio and the condition of carbonization was carried out in order to improve the product durability develop eco-friendly solid fuel mixing food waste and paper sludge. As a result of the experiment, oil fry drying process was the fastest method for drying food waste and paper sludge mixture that contains 80% water inside, and the optimized mixture ratio to minimize the generating concentration of chlorine gas against caloric value of mixture ratio was 7:3. Additionally proper temperature of product carbonization was about $200^{\circ}C$ and shown increasing product durability through the carbonization. Therefore, the pelletized solid fuel be shaped diameter around 0.5cm, length 2cm under which was pulverized and molded using 7:3 mixture of food waste, and paper sludge was the eco-friendly solid fuel possible to be industrialized which is consist of chlorine concentration of below 2.0wt% and the lowest caloric value of over 5,000kcal/kg. In conclusion, this developing manufacturing process of the solid fuel can be interpreted to contribute alternative energy development in accordance with low carbon and green growth era.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.23 no.4
• /
• pp.281-286
• /
• 2011

The objective of this study is to optimize the four-bed six-step pressure swing adsorption(PSA) process for high purity $CH_4$ recovery from the biogas. The effects of P/F(purge to feed) ratio and cycle time on the process performance were evaluated. The cyclic steady-states of PSA process were reached after 12 cycles. The purity and recovery rate of product gas, pressure and temperature changes were constant as the cycle repeated. It was shown that the P/F ratio gave significant effect on the product recovery rate by increasing the amount of purge gas in purge and regeneration step. The optimal P/F ratio was found to be 0.08. As the cycle time increased, the product purity decreased by increasing the feed gas flow rate. It was found that the optimal operating conditions were P/F ratio of 0.08 and total cycle time of 1,440 seconds with the purity of 97%.