• International Journal of Naval Architecture and Ocean Engineering
• /
• v.4 no.3
• /
• pp.228-240
• /
• 2012

Morphing is a geometric interpolation technique that is often used by the animation industry to transform one form into another seemingly seamlessly. It does this by producing a large number of 'intermediate' forms between the two 'extreme' or 'parent' forms. It has already been shown that morphing technique can be a powerful tool for form design and as such can be a useful addition to the armoury of product designers. Morphing procedure itself is simple and consists of straightforward linear interpolation. However, establishing the correspondence between vertices of the parent models is one of the most difficult and important tasks during a morphing process. This paper discusses the mesh-merging method employed for this process as against the already established mesh-regularising method. It has been found that the merging method minimises the need for manual manipulation, allowing automation to a large extent.

• Asia pacific journal of information systems
• /
• v.9 no.1
• /
• pp.17-38
• /
• 1999

While the value of information technology has long been a hot issue, few solid results have been found as of yet. It is partly due to methodological factors and model underspecifcation. This study empirically develops a ITS(information technology structure) taxonomy and investigates the relationships between ITS taxonomy and business performance in the Korean firms. Among factors that impact business performance, organization structure and control system are selected and they are hypothesized to moderate-the relationships between ITS taxonomy and business performance. By surveying 91 manufacturing firms and applying hierarchical cluster analysis, four ITS are identified : centralized, decentralized, centralized cooperative, decentralized cooperative. ANOVA, correlation analysis and crosstable analysis say the presence of moderating effect of organization structure and control system. Cooperative ITS is best in business performance. Centralized ITS is related to functional organizational form. Decentralized ITS is related to product organizational form with decentralized decision making, Centralized cooperative ITS is related to matrix organizational form. Decentralized cooperative ITS is related to matrix organizational form with high integration. These findings have implications for the opportunities and challenges to match information technology with organization structure and control system.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.26 no.8
• /
• pp.1128-1140
• /
• 2002

As consumers' alternatives in fashion store selection increase, they select different store types to purchase different product types. Therefore, the probability of patronage mix behavior according to product type increases. Understanding consumers patronage mix behavior, finding out the determinant attributes of fashion stores for each product type are important to retailers and marketers for building a successful merchandising and marketing strategies. Most of the previous researches in store selection and patronage assume consumer behavior as single store patronage, and thus relatively little is known about patronage mix behavior. Also, little attention has been given to product characteristics as an important variable in store patronage behavior. The purposes of this study were to determine the effects of product characteristics in consumers patronage mix behavior. In this study, a theoretical model including product characteristics as an intervening variable between store attributes and patronage behavior was developed. A Questionnaire was developed and data were collected form 464 adult women living in Seoul area in Korea. Factor analysis, paired t-test, ANOVA, Duncan test and discriminant analysis were employed to analyze the data. As a result, the suggested model was partially verified. First, the product characteristic was found to have an effect on perceived importance of store attributes and on determinant attributes of stores. Consumers were found to use different evaluative criteria for store attributes when they purchase different product types. Second, the perceived importance of store attributes was determined by consumer characteristics as well as product characteristics. Third, the determinant attributes in store selection were affected not only by the perceived importance of store attributes but also by the type of product to be purchased.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1155-1158
• /
• 2005

Micro-stereolithography is a newly proposed technology as a means that can fabricate a 3D micro structure of free form. It makes a 3D micro-structure by dividing the shape into many slices of relevant thickness along horizontal surfaces, hardening each layer of slice with a focused laser beam, and stacking them up to a desired shape. However, we do not anticipate the electric conductivity of the final product at the existing micro-stereolithography. The reason is that this technology uses polymer to make the product. Thus the new suspension which was mixed conventional photopolymer with metal powder was developed in this study. The developed suspensions were based on SL5180 which is commercialized resin and IMS03 that is made in our laboratory. And Triton X-100 was added at the suspension for getting the scattering effect and stabilizing effect. The layer recoating device was developed to be flat the mixed high viscosity suspension. A 3D micro structure was manufactured by using recoating system and micro-stereolithography system. The fabricated product was sintered to get the electric conductivity. After sintering, a pure copper product was made. In this study, new process was developed by making metal micro structure having an electric conductivity. This technology broadened the realm of the micro-stereolithography technology. And it will be applied to make the 3D micro structure of free form which has a high hardness and an electric conductivity in the near future.

• Archives of design research
• /
• v.16 no.2
• /
• pp.243-254
• /
• 2003

This research, we will begin our analysis of the types of research example of designers by the linguistic studies of products form. Specially, we had a mind to generate the linguistic concept of products form by the linguistic relations between tools and thinking, and analysed how activate the roles of form language in linguistic and non-linguistic areas. We understood the relations of design process about idea generation, same means of interpretation of form and the generation of form concept, by using of the roles of form language made in design process. We showed the research examples of Enzo Mari and the origins of form language in view point of design history. Also, we classified the form linguistic concerns of designers and scholars interested in design areas by dividing various factors in view point of language. Finally, through the process of this classification, the researches of form language call for further study, as more the examples of detailed design practises and the individualized form language of products than systematic researches and abstract theories about products, and emphasized this viewpoint, we suggest a going-on research theme, the individualized products' differences of form language and concerns viewpoint of inter-culture, the concept generation of form language of products can be inter-coexistent.

• Bulletin of the Korean Chemical Society
• /
• v.18 no.9
• /
• pp.922-928
• /
• 1997

The conformational transition of poly(L-proline) (PLP), Form Ⅱ → Form Ⅰ and the intermolecular aggregation of the product, Form Ⅰ, during and after the transition in water-propanol (1:7, 1:9, 1:15.7, and 1:29 v/v) were studied. For the study, the viscosity change and excess light scattering intensity were measured in the course of the transition which was determined by the Form Ⅰ fraction, fI of the sample solution. For the PLP sample of molecular weight Mv=31,000 the experimental results show that the reaction course is roughly divided into three regions: in the first region [fI=0.27 to 0.40 (- [α]D=400 to 330)], the conformational change of Form Ⅱ → Form Ⅰ occurs with decrease of viscosity, in the second region [fI=0.40 to 0.80 (- [α]D=330 to 120)], a partial side-by-side (p-S-S) type aggregation in which Form Ⅰ blocks interact with each other, which induces the increase of viscosity, starts to occur, and in the third region [fI=0.80 to 1.00 (- [α]D=120 to 15)], a side-by-side type (raft like) aggregation of Form Ⅰ or an end-to-end (E-E) type aggregation occurs according to the solvent situation, i.e., in a water-rich medium [water-propanol (1:9 or 1:7 v/v)], the (S-S) type aggregation with a gross decrease in viscosity occurs while in a water-poor medium [water-propanol (1:29 or 1:15.7 v/v), the (E-E) type aggregation with a large increase in viscosity occurs. The (S-S) type aggregation was promoted at high temperatures. Based on the structure of PLP, a reasonable mechanism for the (p-S-S) and (S-S) aggregation which occurs with the transition of Form Ⅱ → Form Ⅰ is considered. The suggested mechanism was also supported by the result of chain length effect of PLP for the aggregation.

• Journal of Computational Design and Engineering
• /
• v.2 no.3
• /
• pp.157-164
• /
• 2015

This paper discusses an optimization-based approach for the design of a product platform for industrial three-axis linear-type robots, which are widely used for handling objects in manufacturing lines. Since the operational specifications of these robots, such as operation speed, working distance and orientation, weight and shape of loads, etc., will vary for different applications, robotic system vendors must provide various types of robots efficiently and effectively to meet a range of market needs. A promising step toward this goal is the concept of a product platform, in which several key elements are commonly used across a series of products, which can then be customized for individual requirements. However the design of a product platform is more complicated than that of each product, due to the need to optimize the design across many products. This paper proposes an optimization-based fundamental framework toward the design of a product platform for industrial three-axis linear-type robots; this framework allows the solution of a complicated design problem and builds an optimal design method of fundamental features of robot frames that are commonly used for a wide range of robots. In this formulation, some key performance metrics of the robot are estimated by a reducedorder model which is configured with beam theory. A multi-objective optimization problem is formulated to represent the trade-offs among key design parameters using a weighted-sum form for a single product. This formulation is integrated into a mini-max type optimization problem across a series of robots as an optimal design formulation for the product platform. Some case studies of optimal platform design for industrial three-axis linear-type robots are presented to demonstrate the applications of a genetic algorithm to such mathematical models.

• Transactions of Materials Processing
• /
• v.14 no.5 s.77
• /
• pp.444-451
• /
• 2005

A new extrusion process of the circular section product with helical fins could be developed by rotating extrusion die. The twisting of extruded product is caused by the twisted conical die surface connecting the die entrance section and the die exit section linearly. But, until now, because the process has used fixed extrusion die, it needs high pressure in order to twist billet and form fin shape on the surface of billet. So, during extruding billet, in order not to twist billet, the extrusion die is needed to rotate itself instead of twisting of billet. It is known that it is possible to reduce extrusion load of product with helical fins by analysis and experiments using rotating die. And it is known that, through the extrusion load analysis by $DEFORM^{TM}-3D$ software, optimal rotational velocity of rotating die can be obtained according to reduction ratio of area and twisted angle of die. And experiments and analysis using rotating extrusion die show that the twisted angle of product can be controlled by twisted angle of extrusion helical die and the rotational velocity of extrusion helical die.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.13 no.2
• /
• pp.258-267
• /
• 2010

The necessity of the new system development arises in both defence and commercial systems industry either when a breakthrough in technology needs to be realized in the form of a brand-new system or when the existing product already in operation needs to be upgraded to satisfy the increasing stakeholder's requirements. In the latter case, it is not rare that specific system technical specifications on the existing products are not available. The purpose of this study is to investigate how to handle the difficulty when an upgraded system is required to be developed based on the existing product whose detailed technical specifications cannot be obtained. A step-by-step process is described based on the reverse engineering of the existing product. As a result, a logical system model is obtained for the product. The process developed is further enhanced and evaluated by the computer-aided system engineering tool. The resulting logical system model should be helpful in the next phase of the new product development.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.42 no.6
• /
• pp.977-987
• /
• 2018

This study tests the effect of recommended product presentation on consumers' usage intentions of a website, mediated by mental simulation. Mental simulation refers to perceptual experience, a more automatic form of mental imagery, initiated by exposure to the representations of objects. This study expects that when compliments of clothes (coordination items) are vertically presented online, consumers are likely to feel as if they wear the outfits due to the activation of mental simulation. The survey was conducted on 147 women in an age group between 20 and 40 years in a panel of an online survey firm. Data are analyzed using exploratory factor analysis and bootstrapping analysis by SPSS 20.0. The results show that when compliments (vs. substitutes) of clothes are presented, participants perceive a greater mental simulation. When compliments of clothes are vertically presented (vs. horizontally presented), mental simulation is also highly driven. In addition, mental simulation mediates the effects of online product presentation on consumers' usage intentions of a website. The findings of this study contribute to marketing strategies of online retailers in terms of how product recommendation can be offered to consumers with more psychological benefits.