• Advances in Traditional Medicine
• /
• v.2 no.2
• /
• pp.119-124
• /
• 2002

Cigarette smoking contributes to lung cancer, cardiovascular diseases, oral diseases, etc. In desire to reduce their risk of disease, many cigarette smokers have tried to quit smoking. Sensory aspects of cigarette smoke are important for providing smoking satisfaction. Previously it was reported that citric acid aerosol significantly reduced craving for cigarettes and enhances smoking reduction and cessation. In this study, we tested whether a newly combined product Ciga-X, an aerosol for cessation aid, had toxicity in human embryonic lung fibroblast (MRC-9). The inhibitory effect of Ciga-X on cytotoxicity induced by cigarette smoke extract (CSE) or nicotine was examined in MRC-9, and craving for cigarettes and smorkers satisfaction after using Ciga-X was estimated. Ciga-X did not affect cell viability and had no toxicity in MRC-9. Ciga-X significantly inhibited not only CSE-induced cytotoxicity but also nicotine-induced cytotoxicity in MRC-9. One hundred and forty smokers rated the satisfaction for Ciga-X aerosol and craving reduction for cigarettes after using Ciga-X. The percentage of over 5 rating was 71.0% and 50.0% of subjects in satisfaction test for Ciga-X compared to their own brand and in craving reduction for cigarette, respectively. Besides, craving reduction for cigarette was highly correlated with the duration of smoking. Subjects have smoked under 10 years were more reduced in craving for cigarettes after using Ciga-X as compared to over 10 years (p=0.049). These results suggest that Ciga-X may be effective in promoting smoking abstinence with the reduction of CSE- or nicotine-induced human lung fibroblasts cytotoxicity.

• Korean Journal of Agricultural Science
• /
• v.46 no.4
• /
• pp.723-735
• /
• 2019

The power-train is the most important component of an agricultural tractor. In this study, the strength of the driving gear transmission of an 82 kW-class tractor was analyzed using equivalent torque during plow tillage. The load measurement system consisted of an engine revolution speed sensor, torque-meters, revolution speed sensors for four axles, and pressure sensors for two hydraulic pumps. The load data were measured during plow tillage for four speed stages: F2 (2.78 km/h), F5 (5.35 km/h), F7 (7.98 km/h), and F8 (9.75 km/h). Aspects of the gear-strength such as bending stress, contact stress, and safety factors were analyzed under two torque conditions: the equivalent torque at the highest plow load for the F8 speed stage and the maximum engine torque. The simulation results using KISSsoft showed that the maximum engine torque conditions had a lower safety factor than did the highest equivalent torque condition. The bending safety factors were > 1 at all gear stages, indicating that gear breakage did not occur under actual measured operating conditions, nor under the maximum torque conditions. However, the equivalent torque condition in the contact stress safety factor was > 1, and the maximum torque condition was < 1 at the first gear pair. The method of analysis using the equivalent torque showed lower stress and higher safety factor than did the method using maximum torque. Therefore, when designing a tractor by applying actual working torque, equivalent torque method would support more reliable product development.

• Wind and Structures
• /
• v.20 no.6
• /
• pp.763-791
• /
• 2015

"Wind and Ports" is a European project that has been carried out since 2009 to handle wind forecast in port areas through an integrated system made up of an extensive in-situ wind monitoring network, the numerical simulation of wind fields, the statistical analysis of wind climate, and algorithms for medium-term (1-3 days) and short term (0.5-2 hours) wind forecasting. The in-situ wind monitoring network, currently made up of 22 ultrasonic anemometers, provides a unique opportunity for detecting high resolution thunderstorm records and studying their dominant characteristics relevant to wind engineering with special concern for wind actions on structures. In such a framework, the wind velocity of thunderstorms is firstly decomposed into the sum of a slowly-varying mean part plus a residual fluctuation dealt with as a non-stationary random process. The fluctuation, in turn, is expressed as the product of its slowly-varying standard deviation by a reduced turbulence component dealt with as a rapidly-varying stationary Gaussian random process with zero mean and unit standard deviation. The extraction of the mean part of the wind velocity is carried out through a moving average filter, and the effect of the moving average period on the statistical properties of the decomposed signals is evaluated. Among other aspects, special attention is given to the thunderstorm duration, the turbulence intensity, the power spectral density and the integral length scale. Some noteworthy wind velocity ratios that play a crucial role in the thunderstorm loading and response of structures are also analyzed.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.2 no.1
• /
• pp.41-47
• /
• 1973

In the present work, the quality stability of sun-dried Alaska pollack, Theragra chalcogramma, was discussed in the aspects of non-enzymatic discoloration as a function of relative humidity during storage at room temperature$(20^{\circ}C)$. Frozen Alaska pollack was dressed, filleted, dried for 48 hours in the open air, and finally stored in cylindrical acrylic chambers which contained saturated specific salt solutions proposed by Rockland(1960) for humidity control. The color development of the product was analyzed by spectrophotometry at 10 day-intervals during the storage. Lipid oxidation was measured as TBA value at wavelength of 538nm. And browning pigments were extracted, divided into two fractions and measured at 460nm: one was chloroform-methanol (2:1 v/v)soluble fraction attributed to lipid oxidation, and the other was water dialyzed fraction caused by so called Maillard reaction. The TBA value showed a maximum on 30 day storage, hereafter, intended to decrease gradually. On the other hand, the rate of brown pigment development in water dialyzed fractions as well as in chloroform-methanol soluble fractions was lower at 34 to 45%RH than at any other case, and propagation of lipid oxidation was also diminished at the same levels of humidity. From the facts described previously, it is recognized that storage at 34 to 45%RH provides higher quality stability for sun-dried Alaska pollack.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.2
• /
• pp.1-17
• /
• 2018

The living lab is a user-participatory innovation space where users can solve problems by themselves. Living Lab members are able to participate in all aspects of product development from technology conception. In this study, to prevent pedestrian accidents, auto-image sensing signal system was developed in Jeonju City, using the Living Lab method. In addition, we measured effectiveness of the auto-image sensing signal system with respect to pedestrian waiting time, pedestrian and driver signal violation, and pedestrian jaywalking. It was also compared the measures before installation, after installation and after applying Living Lab method. As a result, all of the three measures of effectiveness appeared to be more effective after Living Lab than after installation. Overall, this study is very significant in that it is the first case where the living lab is applied in transportation.

• The Journal of Korean Institute for Practical Engineering Education
• /
• v.4 no.1
• /
• pp.165-172
• /
• 2012

For practical education, many practices using various practical equipments have to be provided to students. In this study, the application of learning curve to represent student's learning process in a practical education using a equipment was studied. Learning curve model was originally developed in production management and based on human performance in human factors aspects. In this study, the application of learning curve model was studied on the eye tracking system, which is used to evaluate the usability of a product in design area. As a case study for its applicability, practical education for eye tracking system was provided to three students and then task completion times were measured for hardware system setup and gaze image recording. Learning curves were estimated for two tasks and then task completion times were predicted using the learning curves. Through ANOVA(analysis of variance) and correlation analysis, the applicability of learning curve to practical education was analysed. As the result, learning curve could be effectively applied to practical eduacation using equipment.

• The Journal of Korean Institute for Practical Engineering Education
• /
• v.5 no.1
• /
• pp.52-57
• /
• 2013

Because of rapid spread of the PC, many users have been enjoying a variety of content as PC. Especially in recent years, young people has increased dramatically PC usage. Young people get more easily information using a PC. Especially they relieve their stress through online games and feel another fun of virtual reality. It is obviously a good effect that they contact IT culture with rapidly developed. But young people's perspective with world is narrow because of doing more indoor activities than outdoor. Therefore we built Spot experience voucher system using smart phone application. We hope that many young people act outdoor activities. And Our product offer hybrid device by developing HTML5-based app. Thus this app will give interest of spot-experience to young-people. So If young people use this app, they can have many experience and see diverse aspects.

• Journal of the Korea Convergence Society
• /
• v.11 no.1
• /
• pp.161-168
• /
• 2020

This study is designed to develop a walker to assist the elderly in safe, independent walking. To this end, problems were identified through analysis of the walker for the elderly and user observations were used to identify problems and needs. The product analysis showed that most elderly walkers tend to prioritize their functions. In addition, user observations showed that most users had positive perceptions about the function, but that structural aspects, such as operation methods and stability, had negative consequences. A total of five design guidelines were derived based on the problems and needs derived. The design guidelines were designed to focus on improving structural problems rather than functional parts, and to orientate safety over functional priorities. Five design guidelines derived from this study could be used as basic data for the manufacture of walkers that reflect the views and needs of the elderly in the future in the manufacture and design of walkers for the elderly.

• Journal of Korea Foresty Energy
• /
• v.18 no.1
• /
• pp.37-45
• /
• 1999

The greenhouse effect becomes the most serious environmental problem due to excessive emission of carbon dioxide. This effect is aggravated with the deforestation, particularly cleaning of tropical forest for agricultural use. As trees sequester carbon dioxide from atmosphere, forest and forest products play an important role in the use and reduction of carbon dioxide. Wood and wood products require far less energy than the alternatives such as steel, aluminium and concrete for production. Considering high probability of increasing costs in the use of fossil fuel, the relatively low energy requirement for wood processing to very important. Also wood and wood products perform as a long-term storage of carbon. Wood is therefore an environmentally desirable resource. Recently, many alternatives have been introduced for industrial use. In selecting resources, many aspects should be taken into consideration. Wood and wood products have less harmful effects on the environment than the alternatives. We should utilize wood and wood products more efficiently, which should be provided based on the sustainable forest management.

• Journal of the Korean Home Economics Association
• /
• v.41 no.8
• /
• pp.33-53
• /
• 2003

A Study on the color comparison of Korean Saek-dong and Italian futurist fashion It is generally recognized that the color scheme and its characteristics as a product of living culture are strongly reflected in clothing. This study concentrates on the color comparison of Korean Saek-dong which has been used in traditional Korean clothing and Italian futurist fashion which showed dynamic characteristics and brilliant colors. The purpose of this study is to investigate the external format, emotions, functions and meanings of the colors in Korean Saek-dong and Futurist fashion, and to find similarities and differences between them. The results of the study are as follows. The similarities between them are harmony of vivid colors like a rainbow, no-use of black color and expression of rhythm through repeated geometrical shapes. They have been used as festive costumes and have implied meaning of happiness and pleasure. The differences, in the external formats, are as follows. Korean Saek-dong has striped patterns including the color white, and has regular distances among the stripes. But, Futurist fashion includes luminous or fluorescent colors and metallic colors. In addition, it has repeated motifs of geometrical shapes and geometrically divided areas. While Saek-dong expresses Sangsaeng through the conceptual use of color, Futurist fashion shows simultaneity, speed and dynamics through spiritual functions of crossing and inter-penetration. In emotional aspect, Saek-dong expresses pleasure of children's mind and Futurist fashion expresses pleasure of city. In functional aspect, Saek-dons expresses a concept of ceremonial beauty, which is spiritual and symbolizes good auspices, holiness and sorcery. So it is used for ceremonial costume. But, Futurist fashion reflects the harmony of colors created from modem and urban images and shows the willingness and emotion of solving futuristic avant-garde, modernity, dynamics, transformation and bellicosity. So it is used for daywear. While Saek-dong represents succession of tradition, Futurist fashion represents resistance of tradition in cultural aspects.