• Journal of the Korean earth science society
• /
• v.40 no.4
• /
• pp.406-413
• /
• 2019

Red-Green-Blue (RGB) imagery techniques are useful for both forecasters and public users because they are intuitively understood, have advantageous visualization, and do not lose observational information. This study presents a novel RGB convective cloud product and its application to tropical cyclone analysis using Communication, Oceanography, and Meteorology (COMS) satellite observations. The RGB convective cloud product was developed using the brightness temperature differences between WV ($6.75{\mu}m$) and IR1 ($10.8{\mu}m$), and IR2 ($12.0{\mu}m$) and IR1 ($10.8{\mu}m$) as well as the brightness temperature in the IR1 bands of the COMS, with the threshold values estimated from the Korea Meteorological Administration (KMA) radar observations and the EUMETSAT RGB recipe. To verify the accuracy of the convective cloud RGB product, the product was applied to the center positions analysis of two typhoons in 2013. Thus, the convective cloud RGB product threshold values were estimated for WV-IR1 (-20 K to 15 K), IR1 (210 K to 300 K), and IR1-IR2 (-4 K to 2 K). The product application in typhoon analysis shows relatively low bias and root mean square errors (RMSE)s of 23 and 28 km for DANAS in 2013, and 17 and 22 km for FRANCISCO in 2013, as compared to the best tracks data from the Regional Specialized Meteorological Center (RSMC) in Tokyo. Consequently, our proposed RGB convective cloud product has the advantages of high accuracy and excellent visualization for a variety of meteorological applications.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.11 no.3 s.25
• /
• pp.111-119
• /
• 1987

The main purposes of the study were to categorize the clothing items into product groups according to their product characteristics, and to find out the differences of consumer perception on clothing Product groups among different age and socioeconomic groups. A questionnaire about characteristics It?as constructed on the basis of Lipton, Darling, and Miracle's theories on product categorisations. The questionnaires were administered to female subjects in two age groups (20's and 40's) living in Seoul. Subjects were classified into 3 socioeconomic groups for the analysis. The Analysis of variance, post-hoc comparisons (Scheffe test and Tuckey test) were employed for the statistical inferences. The results were as follows ; Group I : none Group II : socks, undershirts, T-shirts (20's age group) Group III : blouse, sweater, blue jean, pajama, langerie, T-shirts (40's age group), skirt Group IV : jacket, skirt (high class of 40's age group) two-piece, half coat, long coat, Korean folk costume Group V : none Some of the clothing items were categorized into different product groups by different age and socioeconomic groups.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2003.05a
• /
• pp.230-235
• /
• 2003

Accident analysis is special concern to researchers in traffic safety. Accident analysis in product safety, however, is not. The needs of product safety management alter it in the world by all manufacturers. The purpose of this study is to propose a theoretical principles for product safety management through the accident cost analyses. The accident cost is a important factor to prevent product accident and to treat some claims of customers. It is sure that this principles can help all making decisions of manufactures with expected accident cost per a product accident and with total expected accident cost.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.03b
• /
• pp.115-118
• /
• 1999

The twisting and bending extrusion process is developed by the $DEFORM^TM$-3D. Because the rectangular section of the extruded product has the symmetry line of cross-section area, the twisting and the bending of extruded product has not occurred. The product with the rectangular section is applied to the twisting and bending extrusion process through the twisted die surface and eccentricity die section. It is shown that the twisting of extruded product is caused by the twisted die surfaces and the bending of extruded product is causd by the eccentricity between the die section. The results by the analysis show that the twisting angle and the curvature of extruded products increases by the die twisting angle, the eccentricity, but decreases by the die length, and friction condition

• Fashion & Textile Research Journal
• /
• v.11 no.3
• /
• pp.409-416
• /
• 2009

Consumer Innovativeness is the level of acceptance tendency of new thinking, new product, and service without any communication with other people or experience. Product Innovativeness can be defined with the terms, newness, discontinuous, and radicalness of a product. The purpose of this research is finding if there are relationship between consumer innovativeness, consumers' product innovativeness evaluation, and attitude toward a product. The subjects were 338 male and female consumers aged from 18 to years old. The data were analyzed by regression analysis, t-test, Pearson correlation analysis, ANOVA. In conclusion, consumer's fashion innovativenes had important effects on smart clothing innovativeness evaluation, but consumer's technology innovativeness had no effect on it.

• Journal of Korean Society for Quality Management
• /
• v.30 no.4
• /
• pp.164-173
• /
• 2002

The first product liability laws went into effect in Korea in July 2002. A person who suffers personal injury or damage to property due to defects in a product may sue both the manufacturer and the seller of the product under the principles of Korea tort law. This paper presents an integrated methodology which is called the QDRD(Quality deployment and reliability deployment) for hazards analysis in new product designs. QDRD applies QFD, FMEA and FTA to identify the hazards component, hazardous situations and hazardous events which could lead to an accident. An example is provided to demonstrate hazards analysis on a product using the QDRD method.

• Transactions of Materials Processing
• /
• v.10 no.4
• /
• pp.302-310
• /
• 2001

The twisting and extrusion process of the product with involute helical fin from the round billet is developed by the upper bound analysis. The twisting of extruded product is caused by the twisted inclined die surface connecting the die enterance section and the die exit section linearly. In the analysis, the internal shear surface is defined as the curved twisted plane from the twisting of die surface and the shear work is calculated by the consumption of shear energy. The increase rate of angular velocity is determined by the minimization of plastic work. The angular velocity of die exit can be controlled by the land length and the length of inclined die. The alular velocity assums to be increased linearly by the axial distance from the die enterance to the die exit. The results of the analysis show that the angular velocity of the extruded product increases with the die twisting angle, the reduction of area, and decreases with the die length, the friction constant.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.8 no.2
• /
• pp.53-59
• /
• 2009

The analysis of injection molding process by CAE is widely used in development of plastic products. That comes from the fact that CAE analysis can reduce trial and error based on optimized design. On this study, by use of MOLDFLOW, the causes of product defects were found and solved by trade-off study. CAE analysis includes Flow-Cool-Warpage Analyses and finally a new mold-die design with better product quality was suggested. On injection molding of round-shaped plastic fan, new mold-die system with 4-tunnel gates located on the edge of a fan disc shows better quality rather than pin-point gate located on the center of a disc. That was effective in terms of flow mark removal and flatness improvement of the product.

• YAKHAK HOEJI
• /
• v.40 no.4
• /
• pp.382-386
• /
• 1996

The compound of the 6,7-dichloroquinoline-5,8-dione has two asymmetric chloro radicals at the position of the C6 and C7. When the compound reacts with ethyl acetoacetate in the presence of sodium ethoxide, it is considered that C6 and/or C7 position of the compound can be substitued. The exact substitued position of the product (I) could not be identified by the NMR analysis in our experiment. Therefore, we synthesized the 3-ethoxycarbonyl-2-methyl-1-N-propyl pyridino(2,3f)indole-4,9-dione by reaction of the product (I) with propylamine via intramolecular cyclization to identify the substitued position of the product (I) using the X-ray crystallographic structure analysis. The result demonstrates that the position of nucleophilic substitution of the product (I) is at the position of the C6.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.03b
• /
• pp.111-114
• /
• 1999

The twisting and extrusion process of the product with involute helical fin from the round billet is developed by the upper bound analysis. The twisting of extruded product is caused by the twisted die surface connecting the die entrance section and the die exit section linearly. In the analysis, the internal shear surface is defined as the curved twisted plane from the taisting of die surface and the shear work is calculated by the consumption of shear energy The increase rate of angular velocity is determined by the minimization of plastic work. The results of the analysis show that the angular velocity of the extruded product increases with the die twisting angle, the reduction of area, and decreases with the die length, the friction condition.