• 한국항해학회지
• /
• 제19권2호
• /
• pp.115-120
• /
• 1995

Recently, the ship automation technology(SAT) has received great attention for the efficient management of the ship with minimum human efforts. Among the SAT, a distance measuring system, the key element is the signal processing unit for the interpretion of the received signal from the remote sensing of the oil tank. In this paper, the tank monitoring system using FM-CW is described for the oil tank level guage measurement with an emphsis of signal processing unit.

• Carbon letters
• /
• 제18권
• /
• pp.80-83
• /
• 2016

• Asian-Australasian Journal of Animal Sciences
• /
• 제28권1호
• /
• pp.102-110
• /
• 2015

The purpose of this experiment was to determine and compare the digestibility of crude protein (CP) and amino acids (AA) in full-oil (no oil extracted) and de-oiled (oil extracted) corn distillers dried grains with solubles (DDGS) with different condensed distillers solubles (CDS) ratios. Six barrows ($29.6{\pm}2.3kg$) fitted with ileal T-cannula were allotted into a $6{\times}6$ Latin square design. Each period was comprised of a 5-d adaption period followed by a 2-d collection of ileal digesta. The five test diets contained 62% DDGS as the sole source of AA. A nitrogen-free diet was used to measure the basal endogenous losses of CP and AA. Chromic oxide (0.3%) was used as an index in each diet. The results showed that CP and AA were very similar in 5 DDGS, but the standardized ileal digestibility (SID) of lysine (from 56.16% to 71.15%) and tryptophan (from 54.90% to 68.38%) had the lowest values and largest variation within the essential AA, which suggests reduced availability of AA and different levels of Maillard reactions in the five DDGS. The apparent ileal digestibility and SID of CP and most of AA in full-oil DDGS (sources 1 and 2) were greater (p<0.05) than de-oiled DDGS (sources 3, 4, and 5). Comparing the AA SID in the 5 DDGS, full-oil with low CDS ratio DDGS (source 1) had non-significantly higher values (p>0.05) than full-oil with high CDS ratio DDGS (source 2); however, the SID of most AA of de-oiled with low CDS ratios DDGS (source 3) were non-significantly lower (p>0.05) than de-oiled with high CDS ratio DDGS (source 4); and the de-oiled DDGS with middle CDS ratio (source 5) but with different drying processing had the lowest SID AA values. In conclusion, de-oiled DDGS had lower SID of CP and AA than full-oil DDGS; a higher CDS ratio tended to decrease the SID of AA in full-oil DDGS but not in de-oiled DDGS; and compared with CDS ratio, processing, especially drying, may have more of an effect on AA digestibility of DDGS.

• 한국응용과학기술학회지
• /
• 제28권4호
• /
• pp.464-471
• /
• 2011

Sesame oil is a simple pressed oil as unrefined oil. During manufacturing process of roasting-expression, benzo(a)pyrene[B(a)P] formed as a strong carcinogenic substance is cause a social problem. In manufacturing process of sesame oil, it had following the forming pathway of benzo(a)pyrene[B(a)P] as well as minimizing plan of B(a)P formation. Suitable roasting condition by roaster was during 15~20min at $220^{\circ}C$, B(a)P content in sesame oil was $1.35{\sim}1.57{\mu}g/kg$. Between roasting temperature and/or roastingtime and forming amount of B(a)P was showed a linear correlation. As a point of view the turbidity and yield of final product, roasting process of the more regular level was required.

• Bulletin of the Korean Chemical Society
• /
• 제35권7호
• /
• pp.2057-2064
• /
• 2014

Thermochemical sulfate reduction (TSR) was conducted in autoclave on the system of crude oil and $MgSO_4$ at different temperatures. Gas chromatography pulsed flame photometric detector (GC-PFPD) was used to detected the composition of organic sulfur compounds in oil phase products. The results of the analysis indicate that with increased temperature, the contents of organic sulfur compounds with high molecular weight and thermal stability, such as benzothiophenes and dibenzothiophenes, gradually became dominated. In order to gain greater insight into the formation and distribution of organic sulphur compounds from TSR, positive ion electrospray Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS) was used in detecting the detailed elemental composition and distribution of them. The mass spectra showed that the mass range of sulfur compounds was 200-550 Da. Four sulfur class species, $S_1$, $N_1S_1$, $O_1S_1$ and $O_2S_1$, were assigned in the positive-ion spectrum. Among the identified sulfur compounds, the $S_1$ class species was dominant. The most abundant $S_1$ class species increase associated with the DBE value and carbon number increasing which also indicates the evolution of organic sulfur compounds in TSR is from the labile series to the stable one. In pure blank pyrolysis experiments with crude oil cracking without TSR, different composition and distribution of organic sulfur compounds in oil phase products were seen from mass spectra in order to evaluate their pyrolysis behaviors without $MgSO_4$. FT-IR and XRD were used in analyzing the products of solid phases. Two distinct crystallographic phases MgO and $MgSO_4$ are found to coexist in the products which demonstrated the transformation of inorganic sulfur compounds into organosulfur compounds exist in TSR.

• 한국해양공학회지
• /
• 제34권1호
• /
• pp.46-54
• /
• 2020

Oil spill accidents at sea result in a wide range of damages, including the destruction of ocean environments and ecosystems, as well as human illnesses by the generation of harmful gases caused by phase changes in crude oil. When an oil spill occurs, an immediate initial action should be performed to minimize the potential damage. Existing studies have attempted to identify crude oil spillage by calculating the crude oil spill range using synthetic aperture radar (SAR) satellite images. However, SAR cannot capture rapidly evolving events because of its low acquisition frequency. Herein, an algorithm for estimating an oil spill area from an image obtained using a digital camera is proposed. Noise that may occur in the image when it is captured is first eliminated by preprocessing, and then the image is analyzed. After analyzing the characteristics of the digital image, a strategy to binarize an image using the color, saturation, or lightness contained in it is adopted. It is found that the oil spill area can be readily estimated from a digital image, allowing for a faster analysis than any conventional method. The usefulness of the oil spill area measurement was confirmed by applying the developed algorithm to various oil spill images.

• 에너지공학
• /
• 제25권1호
• /
• pp.1-8
• /
• 2016

저온환경에서 석유생산이 이루어질 경우 유동관, 라이저와 같은 석유생산시스템 내에서 온도에 민감한 왁스 고형물이 빈번히 집적되어 석유 이송을 방해하거나 배관을 막아 유동안정성 확보를 위한 시간 소모와 경제적 손실이 발생할 수 있다. 이러한 왁스 집적 문제를 제어하기 위해 오일 내 왁스가 처음 석출되기 시작하는 온도인 왁스생성온도를 사전에 파악하는 것이 중요하다. 기존 왁스생성온도 표준측정법은 왁스결정 석출로 인하여 변하는 시료의 혼탁도를 육안으로 확인하는 한계가 있으며, 오일의 연속적인 온도변화를 측정하기 어려워 정확도가 낮다. 이 연구에서는 오일의 왁스생성온도를 정확하게 측정하고자 왁스생성온도 측정 가시화 실험시스템을 통해 시간에 따라 온도를 감소시키며 왁스생성거동을 촬영하였다. 또한 영상 처리기법으로 투명 오일시료의 명도변화를 분석하여 왁스생성온도를 측정하였으며, 이를 표준측정법의 결과와 비교분석하였다.

• Food Science and Biotechnology
• /
• 제14권3호
• /
• pp.305-310
• /
• 2005

Flaxseed is outstanding for lignans and oil rich in ${\alpha}$-linolenic acid which protect against several major illnesses. Better understanding of processing and storage characteristics of flaxseed will increase options for food use. Lignans and oil are found in the hull and embryo, respectively. Comparison of pearling and impact-dehulling processes for separation of lignan and oil-rich fractions showed the impact process was less effective, but easier to scale-up. Screw-pressing embryo reduced oil yield compared to whole seed, but doubled productivity and sharply reduced frictional heating of the oil. Flaxseed hull and embryo, also whole, ground and steamed-ground samples, were stable up to 30 weeks in closed containers at $23^{\circ}C$. Steamed-ground samples in open trays at $40^{\circ}C$ deteriorated markedly (peroxide value > 100 by 22 weeks); yet, whole seed remained stable. Incorporation of 18% flaxseed embryo into yellow perch feed increased ${\alpha}$-linolenic acid to 13 to l4% of muscle and liver lipids, compared to 0.5 to 0.7% in the no-embryo control. Feed conversion ratio, weight gain, and survival were similar. These studies are helping to establish the technological base for processing and utilizing flaxseed and flaxseed fractions to improve human diets.

• Nano
• /
• 제13권12호
• /
• pp.1850141.1-1850141.11
• /
• 2018

Sodium ion batteries based on the more sodium source reserve than that of lithium have been designed as promising alternatives to lithium ion batteries. However, several problems including unsatisfied specific capacity and serious cyclic stability must be solved before the reality. One of the effective approaches to solve the abovementioned problems is to search for suitable anode materials. In this work, we designed and prepared $FeSe_2$ nanoflakes via a simple hydrothermal method which can be adjusted in composition by Fe precursor. As a potential anode for sodium storage, the optimized $FeSe_2$ electrode was further evaluated in different electrolytes of $NaClO_4$ in propylene carbonate/fluoroethylene carbonate and $NaCF_3SO_3$ in diethylene glycol dimethyl ether. The capacity was about $470mAh\;g^{-1}$ and $535mAh\;g^{-1}$ at $0.5A\;g^{-1}$, respectively, in the voltage between 0.5 V and 2.9 V in the cycle of stabilization phase. Superior performance both in capacity and in stability was obtained in ether-based electrolyte, which affords the property without plugging the intermediates of transition metal dichalcogenides during charge/discharge processes.

• 한국세라믹학회지
• /
• 제33권8호
• /
• pp.901-908
• /
• 1996

The oil-based magnetic fluids were prepared with synthesized ultrafine magnette by allowing surfactactants such as sodium oleate and aliquat 336 to adsorb on the surface of magnetite particles. The dispersion ratio of oil-based magnetic fluids was higher than 90% when the amount of sodium oleate and aliqua 336 were more than 2.63$\times$10-2 mol and 6.56$\times$10-3 mol for 20g of magnetite respectively. The dispersion ratio of oil-based magnetic fluids with the amount of secondary surfactant addition was higher than 90% when oil-based magnetic fluids were prepared with aliquat 336 of cationic type. However oil-based magnetic fluids prepared with surfactants of anionic and nonionic type showed lower dispersion than whose with cationic surfac-tants.