• 한국지역사회생활과학회지
• /
• 제24권2호
• /
• pp.221-231
• /
• 2013

This study was carried out to investigate the quality characteristics of Jeung-pyun using high yielding type rice (Dasan, Keunseom) and processing type rice (Daerip, Seolgang, Yangjo) for applying a new processes in rice food industry. The weight, volume, specific volume and expansion of Jeung-pyun were the highest in Dasan. The shapes of cross section showed that the air cell of Jeung-pyun made from Dasan and Daerip were smaller and more regular than Keunseom, Seolgang, and Yangjo. The Jeung-pyun of Daerip was the highest in L value, springiness, cohesiveness and chewiness, Keunseom was the highest in a value and hardness; Yangjo was the highest in b value, adhesiveness and gumminess. Jeung-pyun of Dasan was shown, through sensory evaluation, to be the highest in flavor, appearance and overall preference. The Jeung-pyun of Daerip was the highest in color and taste preference, while Seolgang was the highest in texture preference.

• 전자공학회논문지A
• /
• 제31A권7호
• /
• pp.110-116
• /
• 1994

In this paper a Duty Effective Overlap Scanning method (DEOS) for the improvement of driving efficiency of LC displays which have the RMS voltage responding characteristics is proposed and new processing method of data signals for optimum application of this method is also proposed. Proposed method has a few advantages such as the increment of duty ratio the increment of driving power loaded on LC cell and the decrement of RMS voltage error rate caused by signal attenuation on electrodes composing of display when compared with the conventional method which is called as optimum voltage amplitude selection method. And also by adopting new data signal processing method which has 3 kinds of voltage levels additional advantage much improving crosstalk phenomenon which is the most serious problems of simple matrix structured display is obtained. For the characteristic estimation new mathematical representation for new overlap scanning method and data signal processing method are induced and defined. And by the defined formula and simulation the characteristics of the proposed method and the conventional method are compared and analyzed. As a result of estimation this new method being able to optimize the overlap rate of scan signal and using 3 levels of data signals has the characteristic which can improve the driving efficiency of LC displays.

• Bulletin of the Korean Chemical Society
• /
• 제35권8호
• /
• pp.2431-2437
• /
• 2014

In this study, Ni, Ni-Cu and Ni/Cu catalysts were deposited onto C-fiber textiles via the electrophoretic deposition method, and the growth characteristics of carbon nanofibers on the deposited catalyst/C-fiber textiles were investigated. The catalyst deposition onto C-fiber textiles was accomplished by immersing the C-fiber textiles into Ni or Ni-Cu mixed solutions, producing the substrate by post-deposition of Ni onto C-fiber textiles with pre-deposited Cu, and passing it through a gas mixture of $N_2$, $H_2$ and $C_2H_4$ at $700^{\circ}C$ to synthesize carbon nanofibers. For analysis of the characteristics of the synthesized carbon nanofibers and the deposition pattern of catalysts, SEM, EDS, BET, XRD, Raman and XPS analysis were conducted. It was found that the amount of catalyst deposited and the ratio of Ni deposition in the Ni-Cu mixed solution increased with an increasing voltage for electrophoretic deposition. In the case of post-deposition of Ni catalyst onto substrates with pre-deposited Cu, both bimetallic catalyst and carbon nanofibers with a high level of crystallizability were produced. Carbon nanofibers yielded with the catalyst prepared in Ni and Ni-Cu mixed solutions showed a Y-shaped morphology.

• 한국정보통신학회논문지
• /
• 제6권6호
• /
• pp.819-826
• /
• 2002

셀룰러 뉴럴 네트워크는 국부적 연결특성을 가지고 있어 실시간 이미지처리에 적합한 뉴럴 네크워크이다. 또한 국부적 연결특징은 VLSI구현에 적합하다. 그의 응용분야는 패턴인식과 숫자인식 및 영상처리에 응용되고 있다. 본 논문에서, CNN은 전처리 단계로서 숫자의 특징점 추출에 이용된다. CNN을 이용한 그림자검출은 4내지 6방향으로 검출하여 숫자의 특징점을 방향별로 추출한다. 분류단계에서 이러한 형상자료는 다층BP뉴럴 네트워크의 입력벡터에 적합하도록 압축되어 입력된다. 실험결과 CNN을 통한 숫자인식은 굴림체의 경우96%이상의 인식율을 보여 만족할 만한 결과를 얻었다.

• 산업경영시스템학회지
• /
• 제29권1호
• /
• pp.1-8
• /
• 2006

This paper proposes a real-time resource allocation algorithm for minimizing the completion time of overall workflow process. The jobs in a workflow process are interrelated through the precedence graph including Sequence, AND, OR and Loop control structure. A resource should be allocated for the processing of each job, and the required processing time of the job can be varied by the resource allocation decision. Each resource has several inherent restrictions such as the functional, geographical, positional and other operational characteristics. The algorithm suggested in this paper selects an effective resource for each job by considering the precedence constraint and the resource characteristics such as processing time and the inherent restrictions. To investigate the performance of the proposed algorithm, several numerical tests are performed for four different workflow graphs including standard, parallel and two series-parallel structures. In the tests, the solutions by the proposed algorithm are compared with random and optimal solutions which are obtained by a random selection rule and a full enumeration method respectively.

• Journal of Magnetics
• /
• 제4권1호
• /
• pp.26-32
• /
• 1999

The HDDR process can be used as an effective means of processing of the coercive Nd-Fe-B-type or the Sm2Fe17Nx materials. The HDDR (hydrogenation, disproportionation, desorption, recombination) processed materials are feartured with a very fine microstructure. The thermomagnetic characteristics of the Nd-Fe-B-type or the Sm2Fe17Nx materials with fine microstructure due to the HDDR process were investigated. It has been found that the fine-microstructured hard magnetic materials showed an unusual TMA (Thermomagnetic analysis) tracting featured with a low and constant magnetization at lower temperature range and a peak just below their Curie temperatures when a low external field is applied. This thermomagnetic characteristic was immediate particularly in the TMA with a low applied field. This thermomagnetic characteristic was interpreted in terms of the competition between two counteracting effects; the decrease in magnetication due to the thermal agitation at an elevated temperature and the increase in magnetization resulting from the rotation of magnetization of the fine grains comparable to a critical single domain size due to the decreased magnetocrystalline anisotropy at an elevated temperature.

• 기술혁신학회지
• /
• 제8권3호
• /
• pp.1027-1059
• /
• 2005

The purpose of this paper is to analyze the dynamic characteristics of innovation sources such as scientific knowledges, processing technologies and user's needs in advanced metals technology. The journal articles data of four advanced materials are analyzed; amorphous metals, superplastic materials, shape memory alloys and aluminum-lithium alloy. Some regularities are found from the analysis of the four materials. The innovation proceeds through close interactions among the innovation sources. As the innovation proceeds, the relative importance of each source changes: scientific knowledge initiates the innovation and becomes the most important source in the first phase, then the processing technologies increase importance in the second phase, and then scientific knowledge, again, becomes the leading factor of innovation. Scientific knowledge and processing technology take turns leading the innovation. The impacts of users' needs to the innovation increase more and more as innovation proceeds. The results of analysis imply to the policy makers that emphasis of policy, and therefore the allocation of sources for innovation, should vary along the phases in the life cycle of advanced metals technology.

• 융합신호처리학회논문지
• /
• 제2권1호
• /
• pp.53-62
• /
• 2001

조명 및 반사광의 성질에 의해 블러링이 발생하고 이런 영상을 인식하는 경우 정확한 에지 검출이 어렵게 된다. 본 논문에서는 블러링된 영상에서 에지를 최적으로 검출하기 위해 일정하게 에지를 검출할 수 있는 가우시안 함수와 2차 미분 함수를 합성한 새로운 하이브리드 함수를 제안하고 실제 영상과 컨볼루션 한 후 함수의 local scale 계수 $\sigma$ 값을 변화시키면서, Canny 알고리즘의 방향성 에지 검출방법을 적용하여 에지를 검출하였다. 그 결과 Sobel, Robert, Canny 에지 검출방법보다 0.2~14㏈ 정도의 에지 검출특성이 개선됨을 확인하였다.

• 조명전기설비학회논문지
• /
• 제27권3호
• /
• pp.107-112
• /
• 2013

Cu(In,Ga)$Se_2$ (CIGS) thin films were annealed on molybdenium/sodalime glass substrates of $300{\times}300mm^2$ by rapid thermal processing (RTP) with 2-step rising-temperature times in $N_2$ ambient. Morphological property, structural characteristics and chemical composition of the precursor of CIGS thin films were influenced directly with a change of $1^{st}$-step rising-temperature time in RTP whereas there is no significant difference with the different $2^{nd}$-step rising-temperature time (final crystallization temperature). The shorter $1^{st}$-step rising-temperature time in RTP obtained the higher photovoltaic cell efficiency from 7.469% to 8.479% even though the ideal composition in CIGS thin films could not be accoplished in this study.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2014년도 춘계학술대회
• /
• pp.351-354
• /
• 2014

빅데이터의 등장은 RDBMS로 대변되던 기존 데이터베이스 시장에 다양한 변화를 가져왔다. 빅데이터들은 데이터의 양은 증가했으나 개개의 데이터크기는 작아지고, RDBMS상의 데이터들과 비교해 단순해졌다. 이런 특징은 새로운 데이터처리기술을 요하게 되고, 그에 따라 빅데이터처리에 특화된 다양한 데이터베이스기술이 등장하게 되었다. 이를 NoSQL이라고 정의한다. NoSQL은 각각 데이터의 특성에 따른 처리방식이 달라 하나로 정의하기는 어렵다. 이에 본 논문에서는 다양한 NoSQL의 종류별 특징에 따라 분류하고 실제 빅데이터 운용에 있어 적합한 NoSQL을 알아보고자 한다.