• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 춘계학술대회 논문집
• /
• pp.329-332
• /
• 2005

Cross rolling process is one of incremental forming processes to form an axi-symmetric shaped metal component. It can be classified into two types according to the shape of dies, which are a drum type (roll type) and a plate type (straight type). It can also be classified into a wedge type and a ramp type processes according to deformation characteristics of a material. The ramp type die is applied to plate type cross rolling process in cold forming process for forming of teeth of gear or bolt, while the wedge type die is generally utilized to drum type and plate type cross rolling processes in hot forming process. A shape of the ramp type die is usually same as final shape of a product at every section of a progressing direction, while the shape of the wedge type die has different shapes in a progressing direction. In this paper, a rolling of neck part in a ball stud component has been carried out using the plate type cross rolling process with a ramp shaped die. Forming characteristics have been performed using finite element analysis in order to obtain a proper preform for the ramp type plate cross rolling process.

• 한국기계가공학회지
• /
• 제6권2호
• /
• pp.52-58
• /
• 2007

This study shows a numerical method to predict automobile type air conditioner tube connector in the forming process. The simulation approach with 3-D FEM program(ABAQUS) for forming process, forming process simulation is in good agrement with it in tendency. Finally, we compared the forming result with simulation. The result of research showed thai forming process technology is promising to produce automobile type air conditioner tube connector.

• 한국물환경학회지
• /
• 제26권1호
• /
• pp.160-167
• /
• 2010

In this research, the performance evaluation between an alternating type process and a recirculating type process was investigated by using mathematical models. The Advanced Phase Isolation Ditch (APID) process and the $A^2/O$ process were selected the target processes of the alternating type and recirculating type, respectively. For more quantitative evaluation, 5 performance indexes which included economy and energy efficiency as well as effluent quality were used, and various disturbance conditions of influent were given to the process models. As simulation results, the APID process which had the specific operation modes to use the organic matter in influent effectively showed higher efficiency of denitrification than the $A^2/O$ process. In the case of effluent TSS, the $A^2/O$ process that the retention time in reactors could be maintained stably was more effective than the APID process. In the cases of various disturbance condition, although it was identified that both two processes had similar effluent quality, the sludge production of the $A^2/O$ process showed lower than that of the APID process while the APID process showed higher energy efficiency.

• 한국세라믹학회지
• /
• 제49권3호
• /
• pp.221-225
• /
• 2012

It is possible to enhance the color of the natural diamond with a high pressure high temperature(HPHT) process. We employed a pyrophyllite tube cell and cubic press apparatus for HPHT treatment on the brown colored Type II (5.6 GPa/ $1700^{\circ}C$/ 52 min), and Type I aB(5.6 GPa/ $1650^{\circ}C$/ 30 min) diamond samples. We investigated the microstructure, Types, fluorescence, properties of the diamonds with an optical microscopy, FT-IR, photoluminescence(PL) spectroscopy, Diamond-View, and micro-Raman spectroscopy. Two tinted brown diamonds changed into colorless just after the HPHT process. Optical microscopy showed that no crack and significant inclusion evolution occurred during the HPHT process except the small graphite spot appeared in Type I aB sample. FTIR spectrum confirmed that no Type, amber center, and platelet defect change with the HPHT treatment. Diamond-View could not distinguish the HPHT treated diamonds from the naturals. PL spectroscopy showed that N3 and H3 color centers remained even after HPHT process. Consequently, we successfully changed the color of diamonds into colorless by 5.6 GPa HPHT process.

• 한국수학교육학회지시리즈A:수학교육
• /
• 제57권3호
• /
• pp.271-287
• /
• 2018

This is a case study that defined collaborative utterances and analyzed how they appear in the problem-solving process when 5th-grade students solved problems in groups. As a result, collaborative utterances consist of an interchange type and a deliver type and the interchange type is comprised of two process: the verification process and the modification process. Also, in groups where interchange type collaborative utterances were generated actively and students could reach an agreement easily, students applied the teacher's help to their problem-solving process right after it was provided and could solve problems even though they had some mathematics errors. In interchange-type collaborative utterances, each student's participation varies with their individual achievement. In deliver-type collaborative utterances, students who solved problems by themselves participated dominantly. The conclusions of this paper are as follows. First, interchange-type collaborative utterances fostered students' active participation and accelerated students' arguments. Second, interchange-type collaborative utterances positively influenced the problem-solving process and it is necessary to provide problems that consider students' achievement in each group. Third, groups should be comprised of students whose individual achievements are similar because students' participation in collaborative utterances varies with their achievement.

• 대한간호학회지
• /
• 제37권6호
• /
• pp.823-834
• /
• 2007

Purpose: The purpose of this study was to analyze types of nurse's attitudes toward the aging process. Methods: A Q-methodology which provides a method of analyzing the subjectivity of each item was used. Thirty-four selected Q-statements from each of 38 subjects were classified into a shape of normal distribution using a 9 point scale. The collected data was analyzed using a QUANL PC program. Results: Five types of attitudes towards the aging process from research subjects in Korean nurses were identified. Type I is a positive acceptance type, Type II is a negative acceptance type, Type III is a passive coping type, Type IV is an active coping type, and Type V is an ambiguous acceptance type. Conclusion: The results of the study indicate that different approaches of educational programs for elderly care are recommended based on the five types of nurse's attitude toward the aging process.

• 한국분말재료학회지
• /
• 제8권2호
• /
• pp.110-116
• /
• 2001

Abstract To investigate the effect of mechanical alloying process to thermoelectric properties of PbTe sintered body, Pb-Te mixed powder with Pb : Te : 1 : 1 composition was mechanically alloyed using tumbler-ball mill. Thermoelectric properties of the sintered body were evaluated by measuring of the Seebeck coefficient and specific electric resistivity from the room temperature to 50$0^{\circ}C$. Sintered body of only mechanically alloyed PbTe powder showed p-type behavior at the room temperature, and occurred type transition from p-type to n-type at about 30$0^{\circ}C$. PbTe sintered body which was fabricated using heat treated powder in $H_2$ atmosphere after mechanical alloying showed stable n-type behavior under 50$0^{\circ}C$. N-type PbTe sintered body fabricated by mechanical alloying process had 4 times higher power factor than that fabricated by the melt-crushing process. Application of a mechanical alloying process to fabricate of n-type PbTe thermoelectric material seemed to be useful to increase the power factor of PbTe sintered body.

• 한국과학교육학회지
• /
• 제42권1호
• /
• pp.33-49
• /
• 2022

본 연구는 창의 과정과 산물의 구조적 관계를 분석한 정량적 자료와 정성적 자료를 활용하여 초등학생의 과학 창의성 유형을 탐색하였다. 이를 위해 초등학교 5학년 105명의 학생이 창의 과정과 산물을 나타내는 과학 창의성 검사 도구에 응답한 내용과 그중 과학 창의성이 가장 높았던 4명을 대상으로 주로 어떤 과정으로 창의 산물을 냈는지 면담하여 자료를 수집하였다. 검사 결과에 대해 상관관계 및 구조방정식 분석을 하였고 면담 자료와 함께 유형화의 참고자료로 사용하였다. 연구 결과는 다음과 같다. 첫째, 창의 과정과 산물의 구조방정식 모형은 절대적합지수와 증분적합지수 측면에서 적합도가 검증되었다. 둘째, 지식, 탐구기능 중 관찰, 창의적 사고기능의 창의 과정 중 창의적 사고기능만이 창의 산물에 유의한 영향을 미쳤다. 셋째, 창의적 사고기능 중 과학 창의성 산물과의 연관성은 확산적 사고, 수렴적 사고, 연관적 사고 순으로 나타났다. 넷째, 초등학생의 과학 창의성은 산물에 따라 창의형, 유용형, 독창형, 비창의형으로 유형이 나뉜다. 그중 비창의형은 세부적으로 진부형, 반복형, 미응답형, 비타당형, 추상형으로 나뉜다. 다섯째, 초등학생은 창의 과정에서 지식 혹은 관찰 중 하나를 주로 사용하는 양상을 보였는데, 이에 따라 지식 지향형, 관찰 지향형으로 유형화할 수 있다. 또한, 창의적 사고기능을 얼마나 다양하게 사용했는지에 따라 DT형, DT-CT형, DT-CT-AT형 등으로 나눌 수 있다. 이 연구는 교육자와 연구자가 과학 창의성 교육에 실질적으로 고려해야 할 점을 시사하고 있다.

• 한국기계가공학회지
• /
• 제10권1호
• /
• pp.80-86
• /
• 2011

This study compared and analyzed manual tapping and automatic tapping regarding tapping process characteristics of titanium hard-to-cut-material. Tapping process characteristics of titanium hard-to-cut-material are evaluated as the quality of a screw, wear of a tap, economic analysis, and cycle time etc. The type of screw threads after manual tapping is formed as an irregular type of screw threads, and perfect screw threads are created after automatic tapping. In addition, the chip type after manual tapping process is formed as the discontinuous chip due to work hardening, and the powder type of chip after automatic tapping process is created. In terms of cycle time, an automatic tapping process is shortened by 70% compared to manual tapping process. Insert tip wear of an automatic tapping shown in the process of 5-hole tapping is not found, but hand tap wear for finish cutting is most severe.

• 한국기계가공학회지
• /
• 제2권2호
• /
• pp.45-51
• /
• 2003

The multi-piloting type progressive die for U-bending sheet metal production part is a very specific division. This study reveals the sheet metal forming process with multi-forming die by center carrier type feeding system. Through the FEM simulation by DEFORM, it was accepted to u-bending process as the first performance to design of strip process layout. The next process of die development was studied according to sequence of die development, i.e die structure, machining condition for die making, die materials, heat treatment of partially die components, know-how and so on. The feature of this study is the die development of scrapless progressive die of multi-stage through the modeling on the I-DEAS program, components drawing on the Auto-LISP, CAD/CAM application, ordinary machine tool operating and revision by tryout.