• Journal of Industrial and Engineering Chemistry
• /
• 제68권
• /
• pp.117-123
• /
• 2018

Recently, aqueous method has attracted lots of attention because it enables the solution-processed metal oxide thin film with high electrical properties in low temperature fabrication condition to various flexible devices. Focusing the development of aqueous route, many researchers are only focused on metal oxide materials. However, for expansive application of the aqueous-based metal oxide films, the systematic study of performance change with process variables for the development of aqueous-based metal oxide insulator film is urgently required. Here, we propose importance of process variables to achieve high electrical-performance metal oxide insulator based on the aqueous method. We found that the significant process variables including precursor solution temperature and humidity during the spincoating process strongly affect chemical, physical, and electrical properties of $AlO_x$ insulators. Through the optimization of significant variables in process, an $AlO_x$ insulator with a leakage current value approximately $10^5$ times smaller and a breakdown voltage value approximately 2-3 times greater than un-optimized $AlO_x$ was realized. Finally, by introducing the optimized $AlO_x$ insulators to solutionprocessed $InO_x$ TFTs, we successfully achieved $InO_x/AlO_x$ TFTs with remarkably high average field-effect mobility of ${\sim}52cm^2V^{-1}\;s^{-1}$ and on/off current ratio of 106 at fabrication temperature of $250^{\circ}C$.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.215-215
• /
• 2006

The cyclic butylene terephthalte oligomer was synthesized and the composition of butylenes terephthalate cyclic oligomers was 51.2 % of dimer, 28.1 % of trimer, 7.9 % of tetramer, 8 % of pentamer and 4.8% of hexamer. Polybuthylene terephthalate was polymerized using this cyclic oligomer in the condition of melt process and supercritical process. And PBT/clay nanocomposite were manu- factured from melt process and supercritical process. Chlorodifluoro- methane(HCFC-22) was used as a solvent which has critical point ($Tc=96.2^{\circ}C$, Pc=49.7bar). Also polymer nanocomposite were manufactured using rapid expansion of supercritical solution process.

• 한국습지학회지
• /
• 제9권1호
• /
• pp.61-67
• /
• 2007

Our life totally depends on activated sludgeprocess for treatment of wastewater: sewage and industrial wastewater. Activated sludge process was the epoch-making technology in Environmental field. One century has been almost passed since the process was developed in England, and the process is still on the development of improvement. Here, history of activated sludge process, its mechanismsof treating the wastewater, expectations that we had on the process in the past, and future image and possibility on the process were presented. By reviewing the events related to the process, we can foresee potentials for new possibility of activated sludge process.

• International Journal of Quality Innovation
• /
• 제9권1호
• /
• pp.94-102
• /
• 2008

When facing the global severe competition, the enterprises all try their best to upgrade the quality, reduce the costs to reach the goal of customer satisfaction. Motorola was the earliest firm creating the term Six Sigma (6 ${\sigma}$); GE was the enterprise successfully fulfilling Six Sigma. The success of these two firms revealed the prominent effects and became the world-class model enterprises. The main purpose of promoting Six Sigma activity was to reduce the possible defects in the business process to the least through designing and monitoring business process in order to reach the goals such as the best quality and efficiency, the lowest costs, the shortest circular process time, maximum profits and customer satisfaction. This research used the Six Sigma technique to improve the business process of ceramics manufacturing plant and find out the major factors of slower core task time by the analytical process of Process Mapping, Pareto Chart, Simu18 simulation software and figures and proposed the improvement measures. Through the confirmation of the case companies, it successfully reduced the core process time and the organizational costs and increased the capacity.

• 통상정보연구
• /
• 제9권1호
• /
• pp.99-117
• /
• 2007

The purpose of this study is to explore the application sphere of BPM(Business Process Management) to e-trade process using BPM technology and its service architecture in order to expand the usage of e-trade platform which is developing. After close reviewing the current status of trade process, the possibility of BPM application by e-trade process will be analyzed. The result of analysis is that BPM application to local L/C and purchasing confirmation process could be implemented because those processes are very suitable to apply standardized process and can minimize the risk and confusion of users. BPM application to remaining trade process have to be considered by mid-term and long-term project with the reflection of pilot project performance. Also this study suggests a business management model of e-trade process based on BPM technology which is the new IT technology and integrated interface in view of trade community.

• 상하수도학회지
• /
• 제32권4호
• /
• pp.301-307
• /
• 2018

Membrane distillation (MD) is a thermally driven desalination process with a hydrophobic membrane. MD process has been known to have a lower fouling potential compared to other pressure-based membrane desalination process (NF, RO). However, membrane fouling also occurs in MD process. In this study, the membrane fouling was observed in MD process according to the pre-treatment processes. The filtration and precipitation processes were applied as the pre-treatment to prevent the membrane fouling. The pore sizes of roughing filters were 0.4, 5, 10, 30, and $60{\mu}m$. The concentration of the coagulant was 1.2 mg/L as $FeCl_3$. The membrane fouling on MD membrane was successfully removed with both pre-treatment processes.

• 펄프종이기술
• /
• 제33권4호
• /
• pp.28-34
• /
• 2001

Korea traditional handmade paper, Hanji, has been known for more than thousand years for its high strength, high whiteness, high gloss, good ink reception and long lasting quality. Main component fiber of the Hanji is called 'Dak', which is the bast fiber of the Korea paper mulberry ($\textit{Broussonetia kazinoki}$). Dak has long fiber length, and high cellulose DP, if processed properly. The quality of Hanji is partly from the superior quality of Dak over wood fiber, and partly from the traditional papermaking process. The traditional papermaking process includes pulping, bleaching, refining, use of natural polymer, and sheet making process. Every traditional process has its special role. Comparisons between the modern papermaking technology and the traditional process were made in this study. The traditional process effectively protected cellulose DP in pulping and bleaching process, protected fiber length in refining process, and developed the high strength in the sheet forming process over the modern papermaking process.

• 기술혁신학회지
• /
• 제5권1호
• /
• pp.26-43
• /
• 2002

Korean government has been putting efforts to promote development of technologies by government sponsored labs and to transfer, diffuse, and commercialize these technologies in private sector since mid 1980s. In spite of these efforts, utilization of government-sponsored technology remains in the very low level. According to the survey conducted by Korea Intellectual and Patent Office (1999), the ratio of unused industrial property rights including patents was above 70% of total industrial property rights. Survey on the information and telecommunication industry done by the Institute of Information Technology Assessment (IITA) in 1999 shows that the utilization ratio of government-sponsored technologies is about 55.8%. This is especially true where government is not the primary or end-user of technologies. The purposes of this paper are to (1) identify a process model of technology commercialization, (2) develop the related variables of each step in the six-step continuous process model of government-sponsored technology commercialization, (3) empirically investigate the data gathered through questionnaire survey, and (4) suggest policy alternatives for promoting technology commercialization in Information and Telecommunication industries.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2007년도 The 1st International Symposium on Advanced Magnetic Materials
• /
• pp.71.1-71.1
• /
• 2007

• 기술혁신학회지
• /
• 제2권1호
• /
• pp.1-15
• /
• 1999

This study aims at integrating the sociological study of technology and the economic study of technological learning. It is argued that the sociological approaches of innovation have some strong points in criticizing technological determinism, but have some weak points in explaining how the knowledge base for innovation is accumulated. On the contrary, the economic approaches of innovation have strong points in explaining technology accumulation, but ignore socio-political process of innovation. This study suggests the model which integrates the socio-political process and technological loaming process.