• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.11 no.2
• /
• pp.133-141
• /
• 2017

The hybrid acoustic sensor for implantable hearing aid has the structure in which a sound pressure based acoustic sensor (ECM) and a vibration based acceleration sensor are combined. This sensor combines the low frequency sensitivity of an acoustic sensor with the high frequency sensitivity of an acceleration sensor, allowing the acquisition of a wide range of sound from low to high frequency. In this paper, an acceleration sensor for use in a hybrid acoustic sensor has been proposed. The acceleration sensor captures the vibration of the tympanic membrane generated by the acoustic signal. The size of the proposed acceleration sensor was determined to diameter of 3.2 mm considering the anatomical structure of the tympanic membrane and the standard of ECM. In order to make the hybrid acoustic sensor have high sensitivity and wide bandwidth characteristics, the aim of the resonance frequency of the acceleration sensor is to be generated at about 3.5 kHz. The membrane of the acceleration sensor derives geometric structure through mathematical model and finite element analysis. Based on the analysis results, the membrane was implemented through a chemical etching process. In order to verify the frequency characteristics of the implemented membrane, vibration measurement experiment using external force was performed. The experiment results showed mechanical resonance of the membrane occurred at 3.4 kHz. Therefore, it is considered that the proposed acceleration sensor can be utilized for a hybrid acoustic sensor.

• The Research Journal of the Costume Culture
• /
• v.17 no.6
• /
• pp.1155-1172
• /
• 2009

Wearable computers can be defined as next generation clothing integrated with various digital functions and devices. Unlike existing computers, they are viewed as human-centric computers customized for information utilization and other specific human needs. This study is intended to discover how consumers are accepting wearable computers, which are different from existing computers, based on Technology Acceptance Model(TAM) and to extend the model by adding variable regarding acceptance of wearable computers. A total of 683 copies of questionnaires, distributed to those aged 19 and older, both male and female, were collected online. The data was statistically analyzed for this study using the extended TAM. In order to test hypotheses, the structural equation model using the Lisrel 8.30 version was performed. For analyzing constructs(or traits) of research model, exploratory factor was conducted and the measurement model was assessed from the result. Reliability was assessed through confirmatory factor analysis and the calculation of Cronbach's alpha coefficients. Overall, model fit was assessed by statistical indexes: Chi-square value, GFI, AGFI, and RMR. This study analyzed the process of acceptance of wearable computers with the extended TAM that includes a variable, perceived value, on the basis of previous studies. The results of the analysis revealed that attitude toward wearable computer was directly influenced by perceived usefulness and perceived value but indirectly influenced by perceived ease of use. Acceptance intention of the wearable computer was directly influenced by perceived value and attitude toward wearable computer. To be more specific, perceived usefulness was significantly correlated with both attitude toward wearable computer and acceptance intention of the wearable computer. Perceived value was also significantly correlated with both attitude toward wearable computer and acceptance intention of the wearable computer. The results of this study also suggested that perceived ease of use was actually a causal antecedent to perceived usefulness and perceived value. This research revealed that extended TAM to investigate the acceptance of wearable computer was appropriate. This study is intended to provide a theoretical framework for adoption of wearable computer and suggest empirical analysis that can serve as a guide for wearable computer.

• Restorative Dentistry and Endodontics
• /
• v.26 no.5
• /
• pp.418-435
• /
• 2001

Root canal preparation process is of utmost importance in successful treatment of root canal. Also, one of the most important purpose of the root canal preparation is to enlarge the root canal three dimensionally without changing the curvature of the root canal However as the curvature of the root canal increases, there are many difficulties involved in formation of optimum root canal. Therefore in order to solve the above mentioned problems, new developments in methods of root canal preparation and equipments for such purposes were made. Recently, vigorous studies about newly introduced engine-driven nickel-ti-tanium rotary file are conducted. As shown in research results to dates, it is well established that the use of nickel-titanium file is better suited for curved root canal than stainless steel file in maintaining the curvature or root canal and reducing the deformation of root canal. However it is also acknowledged that there are a few discrepancies in research results according to protocol, due to failure to remove variables in experiments. In addition, although it is recommended by the manufacturer that the GT rotary file should maintain a low rotational speed of 150~350rpm and 'light pressure' as light as not to break the lead of a pencil, academic studies about the vertical force which is not yet standardized are not sufficiently explored. Therefore, this research devised and utilized a special research equipment to standardize the appropriate range of vertical force for GT rotary file through experiments by breaking of the lead of a pencil as expressed by the manufacturer and to accurately measure factors involved through repeating and recreating the environment of root canal preparation. Forming nine experimental groups by varying the vertical forces (150g. 220g, 300g) and rpm (150rpm, 250rpm, 350rpm), the effects of changing vertical forces and rpm on working efficiency were measured in terms of time expended in root canal preparation by crown-down method using a transparent resin block with 35 degree curvature and GT rotary file (z-test). The following research using this special research equipment that involved nine experimental groups and varying the vertical force for root canal preparation from 300g which is within the normal vertical force range to 700g and 1000g which fall outside the normal rpm range. The results were as follows : 1. Analysis of the experiment results revealed that the time spent in root canal preparation decreased as the vertical forces and rpm increased (p<0.05). Also, the effects of rpm were greater than those of the vertical forces within the normal vertical force range ($\beta$-weight test). 2. Observation of the deformation of GT rotary file revealed that deformation increases in a direct correlation with the vertical force increase and in a reverse correlation with the rpm decrease. In the case of the vertical forces close to the normal range, the probability of GT rotary file deformation were quite different depending on the rpm changes. In the case of greater vertical forces, the occurrences of deformation of the file were more frequent regardless of the rpm changes. 3. Deformation and breakage of file were also commonly observed in the expended time measurement experiments and GT rotary file deformation experiments in which low speed rpm (150rpm) was used and at the curved portion of the resin block.

• Journal of Digital Contents Society
• /
• v.19 no.7
• /
• pp.1365-1372
• /
• 2018

The purpose of this study is to analyze the importance of the determinants of housing sales agency's role in the sale of apartment housing. For this purpose, a hierarchical decision model was constructed to understand the role and importance of the sales agency. The analytical variable items structured by the research model were set up through literature review, precedent research, and expert brainstorming. The questionnaire consisted of two comparisons for AHP analysis and the importance of absolute importance for fuzzy analysis. Afterwards, the work of correcting the importance was carried out. As a result of the analysis, it was found that the contractor prioritized the sale conditions and the sales agency had priority over the planning for the sale. As a result of analysis, planning of customer pre-sale counseling data, planning of client subscription and contract maximization plan, planning method of advertisement public media method were found to be the most important factors. The results of measurement of absolute importance(fuzzy) & relative importance(,AHP) showed similar tendency. Therefore, it can be seen that the timing of the model house operation is an important period in which the subscription rate depends on the role of the sales agency and the marketing strategy.

• Solar Energy
• /
• v.12 no.3
• /
• pp.10-20
• /
• 1992

In this experiment, photochemical reaction has been applied to destroy TCE in water phase. The main target of this work is to investigate the technical feasibility of large scale of solar detoxification reactor for water treatment. The results have revealed that solar detoxification utilizing photon energy from the sun is the most attractive process to decompose organic toxins in water phase at room temperature. The detailed results from this work are as follows; (1) The highest conversion ratio of TCE was obtained by using $TiO_2$, annatase as a photocatalyst among $TiO_2$ anatase, $TiO_2$ rutile and $V_2O_5$ under the same experimental condition. The anatase crystal structure was confirmed with XRD analysis, and its surface area was 7.748 $m^2/g$ from the BET-$N_2$ measurement (2) 0.1 wt% of $TiO_2$ anatase has been adopted as optimal quantity for batch slurry reactor at this experimental conditions. (3) The effect of hydrogen peroxide on the conversion of TCE was investigated. Its optimal quantity was 0.06 vol. % under this experimental conditions. (4) The effect of oxygen on the conversion of TCE also was studied by controlling the head space in photoreactor. Results indicated that sufficient amount of oxygen should be supplied to accomplish the highest conversion rate of TCE in water phase.

• Journal of Science of Art and Design
• /
• v.2
• /
• pp.222-238
• /
• 2000

The attempts to explain the criterion of art criticism can be divided into three directions. The first is that there is a universal criterion of criticism. The second is that criticism is a subjective impression of each critic. Therefore, there is no universal criterion beyond a subjective impression. The third is that denies both claims. It tries to and the objective criterion which is neither universal nor subjective. In this paper, I will see how John Dewey criticizes the first two theories and holds the third theory. Dewey's denial of the first theory can be seen in his view of the judical criticism. The judical criticism claims that art criticism can be made on the universal criterion, as judical decision can be made on the general rule supposed to be applicable to all cases. But Dewey claims that the judical criticism cannot explain what makes the artist the 'masters'. Defining art as an experience, Dewey claims that art is a process of doing and undergoing, and that art is essentially an interactive activity between men and his environment As environment changes, the experience of the environment also changes. So art should accept the possibility of new experience. But, since the judical criticism advocates of the universal criterion which cannot allow the changeability, Dewey denies it. On the other hand, Dewey's denial of the second theory can be seen in his view of the impressionist criticism. The impressionist criticism claims that criticism is to clarify the impression which is consisted of feeling and imagery the art object evokes. To this claim, Dewey replies that to clarify an impression is to analyze it, and analysis can proceed only by going beyond the impression to the judgement. As we have seen so far, Dewey has denied the judical criticism that there is a universal criterion supposed to be applicable to all criticism. He has also denied the impressionist criticism that there are only subjective responses to the art object, and hence that there is no criterion of criticism at all. For Dewey, these two criticism are based on the same false assumption of the criterion, although their conclusions are different from each other. Both the judical and impressionist criticism failed to realize the difference between the meaning of the criterion as applied in measurement and as used in criticism. Criticizing of these two views of criticism, Dewey claims that there is an objective criterion which is neither universal nor subjective. Art criticism is objective in tv#o senses, i. e., in the first sense that it can be judged by the properties of the art object and in the second sense that it can be verified by the communities of the critics.

• Korean Journal of Food Science and Technology
• /
• v.27 no.3
• /
• pp.318-323
• /
• 1995

To improve wastewater treatment in a confectionery factory and to optimize chemical coagulation process, this study was performed. $COD_{Mn}$ and total solid of untreated wastewater were $200{\sim}820ppm\;and\;860{\sim}1350ppm$, respectively. Composition of total solid was sugar 40%, protein 10%, hexane-soluble 20%, and ash 30%. Turbidity at 650 nm and the amount of suspended solid (SS) showed correlation, thus turbidity could be used for the on-line measurement of SS. The most effective combination of coagulants for the removal of $COD_{Mn}$ and SS was that of $Al_2(SO_4)_3\;and\;Ca(OH)_2$. The optimal concentration of $Al_2(SO_4)_3\;and\;Ca(OH)_2$ was 480 ppm and 200 ppm, respectively. Optimal retention time of wastewater for $Al_2(SO_4)_3$ addition $Ca(OH)_2$ addition : flocculation was 2 : 2 : 10 min. Multiple treatment of $Al_2(SO_4)_3:Ca(OH)_2$ overcame coagulation inhibition by gelatin and detergent, and addition of microbial sludge reduced it.

• Journal of Korea Water Resources Association
• /
• v.46 no.12
• /
• pp.1249-1263
• /
• 2013

In order to minimize the damages caused by long-term drought, appropriate drought management plans of the basin should be established with the drought forecasting technology. Further, in order to build reasonable adaptive measurement for future drought, the duration and severity of drought must be predicted quantitatively in advance. Thus, this study, attempts to forecast drought in Korea by using an Artificial Neural Network Model, and drought index, which are the representative statistical approach most frequently used for hydrological time series forecasting. SPI (Standardized Precipitation Index) for major weather stations in Korea, estimated using observed historical precipitation, was used as input variables to the MLP (Multi Layer Perceptron) Neural Network model. Data set from 1976 to 2000 was selected as the training period for the parameter calibration and data from 2001 to 2010 was set as the validation period for the drought forecast. The optimal model for drought forecast determined by training process was applied to drought forecast using SPI (3), SPI (6) and SPI (12) over different forecasting lead time (1 to 6 months). Drought forecast with SPI (3) shows good result only in case of 1 month forecast lead time, SPI (6) shows good accordance with observed data for 1-3 months forecast lead time and SPI (12) shows relatively good results in case of up to 1~5 months forecast lead time. The analysis of this study shows that SPI (3) can be used for only 1-month short-term drought forecast. SPI (6) and SPI (12) have advantage over long-term drought forecast for 3~5 months lead time.

• The Journal of the Korea Contents Association
• /
• v.14 no.9
• /
• pp.362-370
• /
• 2014

This study measured and analyzed the correlation coefficient between movements of thoracoabdominal tumors and external respiration in a free-breathing state, using cyberknife image guided radiotherapy(IGRT). This study subjects included a total of 30 patients with lung tumors(n=10), liver tumors(n=10) and pancreatic tumor(n=10) who underwent radiotherapy, and the movements of tumors were analyzed using converted log data of the tumor motion tracking system(MTS). In a free-breathing state, In relation to Peason's correlation coefficient between external respiration and lung tumors in the entire treatment process, the correlation coefficient was 0.646(p<0.05) in the cranio-caudal direction, 0.365(p<0.088) in the left and right direction and 0.196(p<0.115) in the antero-posterior direction. The correlation coefficient of liver tumors was 0.841(p<0.000) in the cranio-caudal direction, 0.346 (p<0.179) in the left and right direction and 0.691(p<0.001) in the antero-posterior direction. The correlation coefficient of Pancreatic tumors was 0.683(p<0.000) in the cranio-caudal direction, 0.397(p<0.006) in the left and right direction and 0.268(p<0.127) in the antero-posterior direction. In conclusion, the measurement findings of thoracoabdominal tumor movement using IGRT would be helpful in determining an accurate target volume. Moreover, the analysis of correlation between external respiration and movements of internal tumors would provide important information to correct movements of tumors for diverse radiotherapy techniques.

• 한국문화재보존과학회:학술대회논문집
• /
• 2004.10a
• /
• pp.115-130
• /
• 2004

Plant-based cultural assets using straw and grass as household goods of our people's have been used as indispensable tools for practical living for a very long time. However, only a limited number of artifacts were unearthed so far due to tile fragility of the material. For this reason, research on plant-based cultural properties had close to no progress, and the appropriateness of the PEG method, high-grade alcohol method, alcohol--ether-resin method, and Paraloid B-72 used in preserving plant-based cultural properties has not been sufficiently investigated. Therefore, this study examined the weight change rate by applying the methods of Primal MC-76 and vacuum freeze-drying used mostly as a earth-layer hardening material among PEG and acrylic resin, which are applied widely for preservation of waterlogged archaeological wood, as a means to preserve plant-based cultural properties along with the examination of the subject material, and an experiment was also performed on moisture absorption. The findings as a result were, first, the plant-based material being studied was found to be Typha (Typha orientalis Presl). Secondly, the weight change experiment applying $PEG\#400$ and $PEG\#4000$ confirmed a steady increase of weight if PEG -2Step is used for treatment. Third, in preserving all subject materials with soil, treatment with $PEG\#4000$, Primal MC-76, and vacuum freeze-drying showed that tile vacuum freeze-drying method resulted in the largest or $20\%$ reduction in weight, while Primal MC-76 resulted in $18\%$ and $PEG\#4000$ in $8\%$ of weight reduction. It was concluded that, considering the stability of soil measurement, this came to be because resin permeation was carried out along with tile drying process. Fourth, the weight changes were found to be around $10\%$ in various humidity conditions after the preservation treatment. The greatest weight change rate was seen in the case of $PEG\#4000$, particularly having chemicals gush out in a high humidity (RH $84\%$ or higher) environment. In the case of Primal MC-76 and vacuum freeze-drying methods, $6\~8\%$ weight changes were detected, and the lowest weight change was found in the case of the vacuum freeze-drying method. Fifth, as for color changes after treatment, blackening occurred most strongly with $PEG\#4000$, while Primal MC-76 and vacuum freeze-drying manifested colors closest to dry straw or grass. However, the texture of straw was not very evident in the case of Primal MC-76, due to a glossy surface, but vacuum freeze-drying was found to offer tile best result in terms of texture. Putting together the results of the above experiments, vacuum freeze-drying presented after being treated with PEG2-Step the most stabilized changes in weight, while it offered the smallest change in color as well.