• Journal of Adhesion and Interface
• /
• v.5 no.2
• /
• pp.22-36
• /
• 2004

Several in-situ testing methods of adhesively bonded joints under static short-time tensile loading are critically analyzed in terms of experimental procedure and data evaluation. Due to its rather homogeneous stress state across the glue line, the tensile-shear test with thick single-lap specimens, according to ISO 11003-2, has become the most important test process for the determination of realistic materials parameters. This basic method, which was improved in both, the experimental part by stepped adherends and easily attachable extensometers and the evaluation procedure by numeric substrate deformation correction and test simulation based on the finite element method (FEM), is therefore demonstrated by application to several kinds of adhesives and metallic adherends. Multi-axial load decreases the strength of a joint. This effect, which is illustrated by an experimental comparison, impedes the derivation of realistic mechanical characteristics from measured force-displacement curves. It is shown by numeric modeling that tensile-shear tests with thin plate substrates according to ISO 4587, which are widely used for quick industrial quality assurance, reveal an inhomogeneous stress state, especially because of relatively large adherend deformation. Complete experimental determination of the elastic properties of bonded joints requires independent measurement of at least two characteristics. As the thick-adherend tensile-shear test directly yields the shear modulus, the tensile butt-joint test according to ISO 6922 represents the most obvious complement of the test programme. Thus, validity of analytical correction formulae proposed in literature for the derivation of realistic materials characteristics is verified by numeric simulation. Moreover, the influence of the substrate deformation is examined and a FEM correction method introduced.

• The Journal of Fisheries Business Administration
• /
• v.33 no.2
• /
• pp.1-29
• /
• 2002

The main objective of this research aims at analyzing efficiency of government financial transfers(GFTs) to the Korean fisheries sector, using the Linear Structural Relations model(i.e., LISERL model) and the field survey data. Most policies of GFTs tend to be implemented to protect industries with weak competitive advantages such as infant and/or primary industries. Specific policy instruments include income transfers, government loans with lower interest rates, taxes and the like. Fishing activities are made at a highly changeable natural environment of the ocean with a great amount of risk and uncertainty. Fishing households make their livelihood under the small-scale fisheries. Such fisheries and fishing households have also a relatively weak market power. Because of these fisheries characteristics most coastal states have adopted a variety of government support programs. However, despite such a huge government support, during the past several decades the world fishing communities have seen a tendency of continuous fishereis resource overexploitation. For this resason there have been hot debates over the government support policies for fisheries through OECD, FAO, WTO, and UNEP. In general, policy evaluations tend to be made on the basis of benefit-cost(B/C) analysis. However, the B/C analysis may produce results quite different from real ones primarily due to many unmeasurable effects. Thus, the authors composed simple questionaires and let fishermen, government officials and academic people answer the questions. The survery was made in several ways such as post-mail and personal/group interviews. In recent years, for analysis of policy performances and effectiveness, the LISREL model has often been used, which consists of structural and measurement eqquations. This model has a good advantage of transforming unobservable variables to observable ones so that it helps construct endogenous cause and effect relationships among relevant variables. The evaluation was done from the two aspects: policy results and policy effectiveness. The policy result evaluation showed that there is a need for improvement for policy problem perception and decision-making process, while the policy effect evaluation suggested that the policy goals were successfully achieved and social justice was improved from the perspective of the entire society as well. However, the research results showed that the GFT policies rendered little contrubtion to narrowing down the gap between GFT beneficiaries and non-beneficiaries incomes.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.6
• /
• pp.147-154
• /
• 2015

Recently agile development process became increasing effectiveness, quality, attention to experts in customer satisfaction, as evidenced in this methodology when selecting projects promoting productive efficiency. With regard to contemporary needs and user requirements on the methodology selected to meet this paper is the product based Cross functional team suggested methodology Feature Team model to solve problems of this model, and organizing the Cross functional team, this team but this outcome (product) basis, were examined for the model that points to progress the development across multiple product as a functional unit, value-driven agile project through the Skills-based model and proposed a difference. And it examined the Agile Maturity metrics. PRINCE2 Agile Health-check entries future development direction of Agile techniques is a requirement of the project outset has studied the subject objective evaluation by the assumption that they can be changed at any time, not fixed this way and for the project team through research The proposed.

• Journal of architectural history
• /
• v.16 no.6
• /
• pp.7-26
• /
• 2007

This article is about restoring the wooden pagoda which located in Silsangsa Temple after historical research. The process of this study, first of all, the theoretical study was considered about similar examples of wooden pagoda and gilt-bronze pagoda in Gorye period and wooden pagoda in contemporary period. After that, the study was established by the present condition of Silsangsa wooden pagoda site, the characteristic of Silsangsa wooden pagoda, the form of arrangement, the scale and height. Finally, considering those studies, the wooden pagoda designed in detail. This restoring design tried to follow the inference in that time. Moreover, the design tried to involve the elements of characteristic of region and Silsangsa wooden pagoda. Therefore, the research establish period of Silsangsa wooden pagoda in Gorye period. Locally, it considered both elements of Silla and Baeckje. The arrange form of restoring wooden pagoda was freestyle arrangement that had two main building of a temple and one middle pagoda. The idea of structure was to establish of double Core system. This system inferred from the system of building structure in ancient wooden pagoda and middle and modern age of multistory wooden construction. According to measurement of foundation stone, the scale of restoring wooden pagoda followed the skill of Tang-scale. The connection structure of each floor followed laminated structure which was the general form of log frame in that time. After study of foundation's condition, the present writer deseeded to have restoring the wooden pagoda 9 stories tall. The final aim was to depend on the structural intuition of the present writer, the writer tried to restore beautiful wooden pagoda according to in those days which is solution for contradiction of unclear point. So, it could be make out a plane of restoring wooden pagoda.

• Journal of the East Asian Society of Dietary Life
• /
• v.26 no.4
• /
• pp.359-369
• /
• 2016

In this study Ragwort, which had various and excellent pharmacological activity, was selected as a functional material, and intended to present an optimum condition of Ragwort Injeolmi by the blanching method, commonly used in the field. The general components, antioxidation, and dietary fiber of Ragwort were analyzed, and produceableness of Ragwort added Injeolmi was reviewed through instrumental inspection and sensory evaluation of various adding ratio of lyophilized Ragwort power and Ragwort pre-processed by blanching. It was proved that the SOD-likely active of Ragwort was 45.69%, total poly- phenol content was 12.45 mg, and total flavonoid content was 10.25 mg. The pH of Injeolmi adding Ragwort powder showed an increasing trend in the order of 0%, 1%, 3%, 5%, while that of Injeolmi adding blanching Ragwort showed increasing trend in the order of 0%, 10%, 15%, 20%, and there were significant difference (p<0.001). The soluble solid content of all sample groups showed constant value, and it was understood that no sugar was added in the process. From chromatography measurement result, a-value (redness) of 1% sample group was the lowest, and there were significant differences among sample groups (p<0.001). During 3 days of storage period, total microbial count of Injeolmi showed increasing trend while the storage period was getting longer. From the acceptability test Injeolmi adding blanching Ragwort had shown generally higher value.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.6
• /
• pp.50-56
• /
• 2015

An efficient fast response hysteretic buck converter suitable for mobile application is propoesed. The problems of large output ripple and difficulty in using of small power inductor that conventional hysteretic converter has are improved by adding ramp generator. and the changeable switching frequency with load current is fixed by adding a delay time control circuit composed of PLL structure resulting in decrease of EMI noise. The circuits are implemented by using BCDMOS 0.35um 2-polt 4-metal process. Measurement results show that the converter operates with a switching frequency of 1.85MHz when drives 80mA load current. As the converter drives over 170mA load current, the switching frequency is fixed on 2MHz. The converter has output ripple voltage of less 20mV and more than efficiency 85% with 50~500mA laod current condition.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.49 no.7
• /
• pp.23-29
• /
• 2012

The LC-based digitally controlled oscillator (LC-DCO), a key component of the all digital phase locked loop (ADPLL), is designed using $0.18{\mu}m$ RFCMOS process with 1.8 V supply. The NMOS core with double cross-coupled pair is chosen to realize wide tuning range, and the PMOS varactor pair that has small capacitance of a few aF and the capacitive degeneration technique to shrink the capacitive element are adopted to obtain the high frequency resolution. Also, the noise filtering technique is used to improve phase noise performance. Measurement results show the center frequency of 2.7 GHz, the tuning range of 2.5 GHz and the high frequency resolution of 2.9 kHz ~7.1 kHz. Also the fine tuning range and the current consumption of the core could be controlled by using the array of PMOS transistors using current biasing. The current consumption is between 17 mA and 26 mA at 1.8V supply voltage. The proposed DCO could be used widely in various communication system.

• Journal of Industrial Technology
• /
• v.23 no.A
• /
• pp.199-206
• /
• 2003

The charcoal-encapsulated methyl silica microcapsules were prepared by a O/W microemulsion sol-gel method, and the adsorption properties on aquatic humic acid were investigated. The capsules prepared were spherical, $100{\sim}1000{\mu}m$ in size. The size distribution was controllable by adjusting the size of charcoal powder, charcoal/methyl silica ratio, and agitating speed in O/W sol-gel process. Adsorption efficiency of charcoal for aquatic humic acid was decreased after encapsulation by methyl silica shell. The decreased adsorption efficiency can be dependent on the decrease of the BET surface area and pore volume after encapsulation. Diffusion properties of humic acid through the capsule shell also played an important role on adsorption efficiency. Therefore, the reasonable target pollutants for the capsules can be VOC or odor molecules which can overcome diffusion barrier through shell of capsules in air condition. Functionalization methods for the charcoal-encapsulated $CH_3(SiO)_n$ microcapsules by incorporation of $TiO_3$ as a phtocatalytic function and by incorporation of inorganic pigment as a color function were also investigated. $TiO_2$ coating properties were controllable by adjusting pH, temperature, and the concentration of $TiOSO_4$. In XRD measurement, the crystal form of the coated $TiO_2$ was anatase. For the colorization of the capsules, inorganic pigments were more efficient than organic dyes, and various color was introduced to the capsules using inorganic pigments.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.1
• /
• pp.49-52
• /
• 2011

A dinuclear copper(II) complex of [$Cu_2(aceace)_4$(dipyph)] [aceace = acetylacetone, dipyph = 1,4-di(4-pyridylethene-2-yl-)benzene] has been synthesized and characterized by elemental analysis, IR and X-ray single crystal diffraction. It crystallizes in the monoclinic system, space group P21/c, with lattice parameters a = 7.9584(16) $\AA$, b = 18.594(4) $\AA$, c = 15.063(4) $\AA$ $\beta=120.97(2)^o$ and $M_r$ = 807.85 ($C_{40}H_{44}Cu_2N_2O_8$), Z = 2. Each of the $Cu^{2+}$ ion adopts a square pyramid geometry and coordinates with four oxygen atoms from two aceace ligands and one nitrogen atom from dipyph bidentate ligand. Magnetic measurement shows that the Weiss constant and Curie constant for the title compound are -0.22 K and 0.1154 emu K/mol, respectively. Thermal stability data indicate that the title complex undergoes two steps decomposition and the residue is $Cu_2O_4$. In the potential range of -1.5 ~ 0.8 V, the title complex represents an irreversible electrochemical process.

• Polymer(Korea)
• /
• v.38 no.3
• /
• pp.358-363
• /
• 2014

Adhesion forces between acrylate imprinting resin and a surface treated atomic force microscope (AFM) tip were investigated. Compared to the untreated silicon tip, 38% of the adhesion force is reduced for the hydrophobic tip treated with $CH_4$ plasma whereas 1.6 time increases is found for the hydrophilic tip with $O_2$ plasma treatment. Such a measurement of the adhesion force using AFM provides very quantitative results on adhesion comparing to the crosscut adhesion test which gives qualitative results. Since the adhesion area becomes larger as the imprinting pattern size gets smaller, the surface treatment issue becomes more important in the nano-imprinting process.