• Journal of the Korea Institute of Building Construction
• /
• v.11 no.1
• /
• pp.35-44
• /
• 2011

Business performance measurement is used as an important tool to evaluate management performance, control human resources, and implement strategies. It can be measured simply in terms of finance including net profit, return on investment, and return on equity, but this is not sufficient because the performance outside of finance such as internal business process and informatization cannot be examined. Therefore this study defined a KPI(Key Performance Indicators) applicable to local construction companies ranked in the top 30 in construction capability, and also introduced differentiated results from the earlier studies by reflecting more realistic corporate management based on the existing studies and interviews with business experts.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.23 no.1
• /
• pp.21-26
• /
• 2014

An arrow produced by a manufacturing process is evaluated using the archer's paradox and the intensity of the impact point. The accuracy rate in particular is changed by the arrow's vibrational movement, which is called the archer's paradox. The archer's paradox occurs not only in the right, left, upward, and downward directions, but in all directions. The optimized value of the archer's paradox has not been studied yet. This paper proposes to measure the archer's paradox to determine its optimized value. Measuring the archer's paradox using a high-speed camera is expensive, and it is difficult to translate the result to a numerical value. However, the device for measuring the archer's paradox proposed in this paper is inexpensive, and the results are easy to convert to a numerical value. Therefore, this device is more suitable for optimization of the archer's paradox than a high-speed camera. In this paper, we propose to measure the size of the paradox using multiple frames, which can measure the position of an arrow moving at a speed of 300km/h to within millimeters. We calculate the size of the paradox experimentally using the measured location in each frame. This value is not an approximate value, but an accurate numerical value.

• Archives of design research
• /
• v.11 no.2
• /
• pp.95-103
• /
• 1998

During design thinking and developing, its idea into the real world, and we are under pattern recognition and gestalt principles of perceptual organization. Generally originality is a part of creativity which consists an integral factor of the designing. This is a study on the measure system for an ability of originality in design. It is reorganized that the OTLD(Originality Test of Line Drawing) is a measuring system for personal originality. In order to catch the development the thoughts, we presented 10 picture planes as stimuli (each picture plane contained 3-18 dots), recorded the tape displaying eye-mark trajectories and outputting the trajectories with EMR(Eye Mark Recorder), then found the process of visual sensation and perception. From the results of this study, we examined the relationships between connections and complexity of the objects on the picture plane, which could be transformed into some objective measuring parameters. We would suggest this OLTD as a measurement system for an ability of originality in design fields, but we couldn't find any reliability and validity for fine art fields.

• Journal of Sensor Science and Technology
• /
• v.13 no.4
• /
• pp.258-263
• /
• 2004

In this study, we carried out a basic study for the development of optical transcutaneous $pCO_{2}$ gas sensor and analyzer using non-invasive method. The basic principle of $pCO_{2}$ measurement is adapted Beer lambert's law and embodied the system using NDIR method. This measuring system was composed of a IR lamp, a optical filter, a optical reaction chamber, pyroelectric sensor and a signal process. We measured $EtCO_{2}'s$ concentration in basis step instead of $pCO_{2}$ gas that can collect by inflicting heat in outer skin. We minimize the size of optical reaction chamber which takes up the largest volume, to make the portable sensor. We made optical reaction chamber in Si wafer using MEMS technology and the optical reaction chamber was shortened to 2 mm and we carried out an experiment. When we injected the $EtCO_{2}$ to the inside of the optical reaction chamber, we could confirm change of 4.6 mV. The system response time was within 2 second that is fairly fast.

• Journal of Internet Computing and Services
• /
• v.13 no.1
• /
• pp.45-55
• /
• 2012

Electronic data management is getting important to reduce overall cost and run-time of clinical data management with the enhancement of data quality. It also critically needs to meet regulated guidelines for the overall quality and safety of electronic clinical trials. The purpose of this paper is to develop the performance evaluation framework in electronic clinical data management. Four key metrics in the area of infrastructure, intellectual preparation, study implementation and study completion covering major aspects of clinical trial processes are proposed. The performance measures evaluate the extent of regulation compliance, data quality, cost and efficiency of electronic data management process. They also provide measurement indicators for each evaluation items. Based on the key metrics, the performance evaluation framework is developed in three major areas involved in clinical data management - clinical site, monitoring and data coordinating center. As of the initial attempt how to evaluate the extent of electronic data management in clinical trials by Delphi survey, further empirical studies are planned and recommended.

• Fire Science and Engineering
• /
• v.29 no.4
• /
• pp.21-25
• /
• 2015

The usage of the correct combustion characteristics of the treated substance for the safety of the process is critical. For the safe handling of bromobenzene being used in various ways in the chemical industry, the flash point and the autoignition temperature (AIT) of bromobenzene was experimented. And, the lower explosion limit of bromobenzene was calculated by using the lower flash point obtained in the experiment. The flash points of bromobenzene by using the Setaflash and Pensky-Martens closed-cup testers measured $44^{\circ}C$ and $50^{\circ}C$, respectively. The flash points of bromobenzene by using the Tag and Cleveland automatic open cup testers are measured $56^{\circ}C$ and $64^{\circ}C$. The AIT of bromobenzene by ASTM 659E tester was measured as $573^{\circ}C$. The lower explosion limit by the measured flash point $44^{\circ}C$ was calculated as 1.63 Vol%. It was possible to predict lower explosion limit by using the experimental flash point or flash point in the literature.

• Korean Journal of Food Science and Technology
• /
• v.39 no.5
• /
• pp.584-587
• /
• 2007

The effect of molar substitution (MS, 0.030-0.118) on the dynamic rheological properties of hydroxypropylated rice starch pastes (5%, w/w) was investigated by small-deformation oscillatory measurements during aging. The magnitudes of storage (G#) and loss (G") moduli measured at $4^{\circ}C$ before aging increased with an increase in MS in the range of 0.030-0.118, while those of tan ${\delta}$ (the ratio of G"/G#) decreased. The G# values of hydroxypropylated rice starches, as a function of aging time (10 hr) at $4^{\circ}C$, increased rapidly at the initial stage, and then reached a plateau region at shorter aging times. However, for the native starch, the plateau values were not observed for G# after a long aging time. Increasing the MS resulted in a decrease in plateau values. The rate constant (K) for structure development during aging was described by first-order kinetics. The K values of hydroxypropylated rice starches at 0.086 and 0.118 MS were much lower than the K value at 0.030 MS.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.20 no.3
• /
• pp.231-237
• /
• 2000

The commercial cermet cutting tools consist of multi-carbide and a binder metal of iron group, such as cobalt and nickel which are ferromagnetic. In this paper, a new approach to evaluate the mechanical properties of TiCN based cermet by magnetic properties were studied in relation to binder content and sintering conditions. The experimental cermet was prepared using commercial composition with the other binder contents by PM process. It was found that the magnetic properties of the sintered cermets remarkably depended on the microstructure and the total carbon content. The magnetic saturation was proportional to increment of coercive force. At high carbon content in sintered cermet, the magnetic saturation was increased by decreasing the concentration of solutes such as W, Mo, Ti in Co-Ni binder. As the coercive force increases, the hardness usually increases. The strength and toughness of the cermet also increased with increasing the magnetic saturation. The measurement of magnetic properties made it possible to evaluate the mechanical properties in the cermet cutting tools.

• Journal of Korean Society for Quality Management
• /
• v.42 no.3
• /
• pp.425-444
• /
• 2014

Purpose: This study aims to overcome the problem of private education market environment which is polarized into commercialized large private education institutions and small and medium sized private education institutions in a poor business environment, and develop systematic performance measurement model applicable for small and medium sized private education institutions. Methods: To develop the BSC which measures financial and non-financial indicator in a balanced manner and introduce the BSC into private education institutions that contain conflicting goals "EDUCATION" and "PROFIT". In particular, Utilizing the methodology of AHP, the priority of strategies and execution assignments are derived. Results: BSC model was developed and introduced by cooperating with executives of the private education institution. Moreover, the study permits to achieve the strategy, enterprise-wide vision and mission by deriving strategy map and applying it to the private education institution. To measure the performance of BSC model instruction, KPI corresponding to the strategic objectives of each perspective was derived. Conclusion: BSC model generally introduces to large-sized companies and public institutions. In this study, BSC model is developed by focusing on small and medium sized private institution. Furthermore, this study is more than simple model development, it makes a connection with achievement of strategic objectives, enterprise-wide vision and mission through strategy map and strategy execution method. Through the developed BSC model and strategy execution method, utilization plan in practice and customized model for private education institutions coexisting profit and non-profit objectives were developed, and academic implications were presented.

• Journal of Korean Society for Quality Management
• /
• v.46 no.3
• /
• pp.425-440
• /
• 2018

Purpose: This study is aimed at developing of the flex resistance testing process at low temperature with the waterproof fabric to suit the military environment, and is designed to fit for the purpose of the waterproof materials in order to optimize the test method by finding out matters to improve from existing the test method and through previous studies. Methods: The test method, which has been applied to flex resistance of existing water-repellent materials, was improved and consequently, differentiated test results could be obtained according to the test temperature, sample size, and flexing method. Results: The testing of the total of 8 samples revealed that performance of the military requirement could hardly be met just by presenting the materials or 2~3 layers when the quality criteria for high functional water repellent fabrics were applied. PTFE(Polytetrafluoroethylene) is preferred to PU(Polyurethane) to be used in the extremely low-temperature environment, but durability under the low-temperature environment may be varied depending on film thickness or laminating technique even if the materials of waterproof films are identical. Therefore, in addition to the material or texture, the test method capable of reflecting durability under the low-temperature environment shall be suggested, and the newly designed test method proposed in this study was shown to suggest differentiated quality criteria by the material. Conclusion: The water resistance measurement and the test method following flex resistance with expanded range of flex will enable the differentiable test of the samples according to the number of repetition. This study is meaningful in that it suggests a differentiable test method capable of establishing a basis of deciding suitable material when selecting military goods made of water repellent material by properly improving the test method.