• Smart Structures and Systems
• /
• v.22 no.3
• /
• pp.277-290
• /
• 2018

In this paper, wavelet finite element model (WFEM) updating technique is employed to detect sub-element damage in thin plate structures progressively. The procedure of WFEM-based detection method, which can detect sub-element damage gradually, is established. This method involves the optimization of an objective function that combines frequencies and modal assurance criteria (MAC). During the damage detection process, the scales of wavelet elements in the concerned regions are adaptively enhanced or reduced to remain compatible with the gradually identified damage scenarios, while the modal properties from the tests remains the same, i.e., no measurement point replacement or addition are needed. Numerical and experimental examples were conducted to examine the effectiveness of the proposed method. A scanning Doppler laser vibrometer system was employed to measure the plate mode shapes in the experimental study. The results indicate that the proposed method can detect structural damage with satisfactory accuracy by using minimal degrees-of-freedoms (DOFs) in the model and minimal updating parameters in optimization.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.2 no.1
• /
• pp.45-64
• /
• 1984

NiNH4PO4 was Prepared from waste Ni catalyst used in hydrogenation of oil and fat. NiNH4PO4 was calcined at different temperature respectly 800,100,100˚C to prepare Nickel yellow. The result from this experiment are summerizer as follows: 1) Nickel yellow formed at 1100˚C was most clearness yellow color from color analyzer date. 2) Nickel yellow was consist of -Ni2P2O2 Ni3(PO4)2 from X-ray diffraction analysis. 3) The endothermic pick at 100˚C and exotherwic pick about 1050˚C on calcination of NiNH4PO4 were checked in DTA (difference Thermal analysis data.)

• Journal of Korean Physical Therapy Science
• /
• v.16 no.2
• /
• pp.11-17
• /
• 2009

Background: The purpose of this study was to investigate the effects of the body alignment on the type and weight of the bag. Methods: The Subjects(n=62) measured posture alignment and make out the questionnaire. The questionnaire item was type of the bag, weight of the bag, side which carries the bag, and time to carry the bag. The posture alignment measured by global posture system(GPS). GPS Measurement was ASIA, acromion process, medial malleolus on Frontal plane, ear, shoulder joint, knee joint, lateral malleolus on sagittal plane, and trunk rotation on transverse plane. Results: The backpack and shoulder bag was no significant. The width of the strap bag was not significant. The side which carries on shoulder bag was statistical significance(p<.05). The time to carry the bag was statistical significance on change of posture(p<.05). A bag weight was no significant. Conclusion: This research provides the direction and carry the bag in time for the posture. This study showed that type and weight of bag does affect body alignment. This indicates that there is an interaction that plays a crucial roles in the type and weight of bag and the body alignment.

• International Journal of Contents
• /
• v.10 no.3
• /
• pp.17-25
• /
• 2014

In this paper, we describe an adaptive Markov chain Monte Carlo-based particle filter that effectively addresses real-time multi-face tracking on mobile platforms. Because traditional approaches based on a particle filter require an enormous number of particles, the processing time is high. This is a serious issue, especially on low performance devices such as mobile phones. To resolve this problem, we developed a tracker that includes a more sophisticated likelihood model to reduce the number of particles and maintain the identity of the tracked faces. In our proposed tracker, the number of particles is adjusted during the sampling process using an adaptive sampling scheme. The adaptive sampling scheme is designed based on the average acceptance ratio of sampled particles of each face. Moreover, a likelihood model based on color information is combined with corner features to improve the accuracy of the sample measurement. The proposed tracker applied on various videos confirmed a significant decrease in processing time compared to traditional approaches.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2006.11a
• /
• pp.3-16
• /
• 2006

In the age where the Internet changes everything, even the earth has become flat. The boarders between nations, locations, times, and industries are not maningful, and no single company can do the whole process well. Therefore, various types of 'Value network' and 'Relation web' emerge for moving first and fast learning. Bort the relationship maturity model (RMM) proposed and the partnership management initiatives at SKT demonstrate that the concept is important, and that the final goal can be reached only through a series of critical outcome at each phase. In particular, recognizing as core infrastructures various online/offline channels, deep trust, and rich communications is an important finding for a successful relationship management. Also, related literatures suggest the following key factors to be influential in more that two phases: professionalism including expertise, similarity, channel capacity. Based on these findings, future efforts need to be put on the research & development of related measurement and management tools. We do hope more people dance with their partners through these efforts.

• Journal of the Korean Applied Science and Technology
• /
• v.19 no.1
• /
• pp.49-55
• /
• 2002

We carried out this experiment to observe electrochemical properties for LB films of phospholipid(Dilauroyl-L-${\alpha}$-Phosphayidylcholine) and 4-octyl-4'-(5-carboxypentamethylene-oxy)azobenzene mixture by the cyclic voltammetry. LB films of 8A5H and 8A5H-DLPC(1:1, 2:1) were deposited by using the Langmuir-Blodgett method on the ITO glass. We determined electrochemical measurement by using cyclic voltammetry with a three-electrode system, An Ag/AgCl reference elect rode, a platinum wire counter electrode and LB film-coated ITO working electrode measured in 0.1, 0.5, and 1.0 mol/L $NaClO_{4}$ solution. A measuring range was reduced from initial potential to -1350 mV, continuously oxidized to 1650 mV and measured to the initial point. The scan rate were 50, 100, 150 and 200 mV/s. As a result, LB films of 8A5H 8A5H-DLPC appeared irreversible process caused by only the oxidation current from the cyclic voltammogram.

• Journal of Nutrition and Health
• /
• v.21 no.5
• /
• pp.333-347
• /
• 1988

The purpose of the present study was to investigate the relationship between nutrient status, and bone mineral state which influenced by aging process. The subjects were 196 people over 65 years old(male 72, female124). The present dietary intake was estimated by the 24-hr, recall method, and individual dietary history concerning consumption of meat, fish and dairy products was obtained by questionaires. The syndrome of senility including seniliy was evaluated according to "Cornell Medical Index". The five subjects who showed 'Good' grade in bone senility, and five subjects who showed 'Risk' and 'Danger' grade were selected and their spine and femur bone density was measured by "Dual Photon Absorptiometry". The bone density measurement showed that the subjects with 'Good' grade in bone senility had bone density above that of normal person, and their nutrient status were satisfactory, whereas the subjects with 'Risk' and 'Danger' grade in bone senility had severe osteoporotic pattern, and their nutrient status were very poor. The food consumption score showed that the subject with higher intake of meat rather than milk had good grade in bone senility (p<0.05). Therefore, past meats consumption can be considered to be a significant factor in the present bone status. The nutrient intakes appeared to be significant factors in bone status in male, whereas there was little effect of nutrients intakes in female. Therefore, the risk of osteoporosis can increase as syndrome of bone senility and nutrient intakes were worse, and its is possible to evaluate bone status and predict osteoporosis simply from informations concerning syndrome of bone senility and nutrient intakes in old population over 65.

• Journal of Information Technology Services
• /
• v.4 no.1
• /
• pp.129-139
• /
• 2005

This paper proposes a framework of Operational Risk-based Business Continuity System(ORBCS), and develops protection system for operational risk through operational risk assessment and loss distribution approach based on risk management guideline announced in the basel II. In order to find out financial operational risk, business processes of domestic bank are assorted by seven event factors and eight business activities so that we can construct the system. After we find out KRI(Key Risk Indicator) index, tasks and risks, we calculated risk possibility and expected cost by analyzing quantitative data, questionnaire and qualitative approach for AHP model from the past events. Furthermore, we can assume unexpected cost loss by using loss distribution approach presented in the basel II. Each bank can also assume expected loss distributions of operational risk by seven event factors and eight business activities. In this research, we choose loss distribution approach so that we can calculate operational risk. In order to explain number of case happened, we choose poisson distribution, log-normal distribution for loss cost, and estimate model for Monte-Carlo simulation. Through this process which is measured by operational risk. of ABC bank, we find out that loss distribution approach explains closer unexpected cost directly compared than internal measurement approach, and makes less unexpected cost loss.

• Journal of Institute of Convergence Technology
• /
• v.4 no.2
• /
• pp.51-54
• /
• 2014

Energy storage not only reduces the mismatch between supply and demand but also improves the performance and reliability of energy systems. The different forms of energy that can be stored, including mechanical, electrical and thermal energy. Phase change materials (PCM) are latent heat storage materials. A large number of phase change materials (organic, inorganic and eutectic) are available in any required temperature range. We concentrated on eutectic materials and made a eutectic by mixing urea and choline chloride. Heat capacity ($C_p$) is one of the most important properties to be considered when a process is developed using the eutectic and currently DSC (Differential Scanning Calorimetry) has been proved as an effective technique to measure the heat capacity. This study focused on measuring heat capacity ($C_p$) of the mixing urea and choline chloride by DSC.

• The Journal of the Korea Contents Association
• /
• v.7 no.8
• /
• pp.41-49
• /
• 2007

BCI system integrates control or telecommunication system with generating electric signals in scalp itself after signal acquisition. This system detect a movement of EEG at real time, can control an electron equipment using a generated signal through EEG movement or software-based processor. In this paper, we deal with removing and separating artifacts induceced from measurement when brain-computer interface system that analyzes recognizes EEG signals occurred from various mental states. In this paper, we proposed a method of EEG classification and an artifact interval detection using bisection mathematical modeling in the EEG classification process for BCI system implementation.