• Sleep Medicine and Psychophysiology
• /
• v.5 no.2
• /
• pp.119-133
• /
• 1998

Attentional processes facilitate cognitive and behavioral performance in several ways. Attention serves to reduce the amount of information to receive. Attention enables humans to direct themselves to appropriate aspects of external environmental events and internal operations. Attention facilitates the selection of salient information and the allocation of cognitive processing appropriate to that information. Attention is not a unitary process that can be localized to a single neuroanatomical region. Before the cortical registration of sensory information, activation of important subcortical structures occurs, which is called as an orienting response. Once sensory information reaches the sensory cortex, a large number of perceptual processes occur, which provide various levels of perceptual resolution of the critical features of the stimuli. After this preattentional processing, information is integrated within higher cortical(heteromodal) systems in inferior parietal and temporal lobes. At this stage, the processing characteristics can be modified, and the biases of the system have a direct impact on attentional selection. Information flow has been traced through sensory analysis to a processing stage that enables the new information to be focused and modified in relation to preexisting biases. The limbic and paralimbic system play significant roles in modulating attentional response. It is labeled with affective salience and is integrated according to ongoing pressures from the motivational drive system of the hypothalamus. The salience of information greatly influences the allocation of attention. The frontal lobe operate response selection system with a reciprocal interaction with both the attention system of the parietal lobe and the limbic system. In this attentional process, the search with the spatial field is organized and a sequence of attentional responses is generated. Affective, motivational and appectitive impulses from limbic system and hypothalamus trigger response intention, preparation, planning, initiation and control of frontal lobe on this process. The reticular system, which produces ascending activation, catalyzes the overall system and increases attentional capacity. Also additional energetic pressures are created by the hypothalamus. As psychophysiological measurement, skin conductance, pupil diameter, muscle tension, heart rate, alpha wave of EEG can be used. Event related potentials also provide physiological evidence of attention during information process. NI component appears to be an electrophysiological index of selective attention. P3 response is developed during the attention related to stimulus discrimination, evaluation and response.

• Journal of the Korea Safety Management & Science
• /
• v.10 no.4
• /
• pp.297-307
• /
• 2008

At the spots of enterprises experiencing rapid environmental changes, necessity for ceaseless managemental innovation is raised. We can't deny that management quality is also a part of such managemental innovation. Introduction of management quality by an organization is different from introduction of other individual innovative techniques. Management quality is not one time project but complete historical change program to be pursued continuously. Furthermore, it must be understood as a strategic 'Quality Journey' looking for far future of an organization. Malcolm Baldrige Model has been increasingly used in Korea as a global standard for management quality. The model, however, has shown a number of limitations in application due to nonsystematic elements in the implementation process. The deployment process of the model should be detailed through a real world case study. In this research, we proposed a quality evaluation standard model which is suitable for the Korean public enterprise based on the Malcolm Baldrige Non-profit Criteria, and examined the model. A 7-Point Likert Scale was used based on the seven categories within the 2007 Malcolm Baldrige Non-profit Criteria: Leadership, Strategic Planning, Customer and Market Focus, Management Analysis and Knowledge Management, Workforce Focus, Process Management, and Results. Furthermore, we analysed the validity and causal relationship among the factors within the model. Through the above case study, following common factors for successful Malcolm Baldrige Model have been derived. The following is a summary of the results of this study. First, for Malcolm Baldrige Model management, needs powerful support Leadership. Second, for Malcolm Baldrige Model management, needs systematic Strategic Planning. Third, for Malcolm Baldrige Model management, needs the continuous Customer and Market Focus. Fourth, for Malcolm Baldrige Model management, needs systematic Measurement Analysis and Knowledge Management. Five, for Malcolm Baldrige Model management, needs systematic Workforce Focus. Six, for Malcolm Baldrige Model management, needs systematic Process Management. The finding are surely necessary factors to arrange the human resource management for upgraded management quality, those factors help to explain why all enterprises consider human resource as the strategic view.

• Korean Journal of Childcare and Education
• /
• v.10 no.6
• /
• pp.243-264
• /
• 2014

The present study examined the effects of science activities motivated through children's songs on young children's science-related attitudes, and understanding of science processing. skills. The subjects of the present study were 40 children aged five, among them 20 children being assigned into an experimental group, and 20 children into a control group. An Hyun-Jeong's(2011). 'The Test of Science-Related Attitudes' and science process skills measurement questions from 'The Science Learning Assessment' by Samarapungavan, Mantzicopoulos, Patrick, and French (2009) were used after adapting them as research tools. The experimental group performed science activities motivated through children's songs 21 times, 3 times a week for 7 weeks; learning children's songs and asking science questions at the first stage, performing science activities at the second stage, and adapting children's songs based on the findings of science activities. The control group performed the learning of children's songs, science activities, and rhythmic activities in the same period. The pre- and post-test data were analyzed as at-test using SPSS program. The study results indicated that science activities motivated through children's songs were effective in improving young children's science-related attitudes and their understanding of science process skills.

• 대한공업교육학회지
• /
• v.33 no.1
• /
• pp.265-281
• /
• 2008

The objective of this study is to show practice example let student experience about concurrent servers based multi-processes and multi-thread among the principles of data communication in ICT(information and communications technology). For this, we first implement multi-process server(fork server) and multi-thread server(thread server), and multi-thread client(thread client), Secondly, for experimental environment, we developed small ethernet networks and measure data transfer time with relation to the number of users. Experimental results show that mean transfer time of thread server is less than that of fork server by 20~61 % on average. Furthermore, it is found that the difference of data transfer time between fork server and thread server is proportional to that of the number of users. Main reason of performance difference dues to the difference between process forking time and thread creation time. We can also find that context switching for process and thread affects the load of web server. Our presentation and experimental results can be applied to used as the educational practice materials with which student can experience data communication principles.

• Journal of the Korean Wood Science and Technology
• /
• v.47 no.2
• /
• pp.129-144
• /
• 2019

This study aimed at developing an accelerated collection method that reduces measurement and collection time by improving and complementing the desiccator method, which is mainly used for quality control in wood-based panels and furniture production sites. First, this study measured the formaldehyde emissions from the wood-based panels by grade using the desiccator method. Further, this study compared the desiccator method with the developed process and analyzed the correlation in optimal temperature, time, and exposed area. The results showed that the developed process resulted in relatively similar outcomes in comparison to the desiccator method when the temperature was $100^{\circ}C$, the time was 1 h, and two specimens were used, at which the correlation was high. To verify the developed process, this study commissioned Korea Conformity Laboratories with the standardized temperature, time, and the number of specimens to compare them with the specimen that was not used in the actual test. As a result, the correlation to the desiccator method was shown to be very high. However, the formaldehyde emission measured by the accelerated collection process was mostly higher than that measured by the desiccator method. The formaldehyde emission grades from several specimens were one level higher. However, from the perspectives of quality control, it was determined that the accelerated collection method developed in this study could be sufficiently used.

• Journal of the Korean Geotechnical Society
• /
• v.24 no.12
• /
• pp.103-111
• /
• 2008

Soils naturally contain grains of different minerals which may be dissolved under chemical or physical processes. The dissolution leads changes in microstructure of particulate media, such as an increase in local void or permeability, which affects the strength and deformation of soils. This study focuses on the small strain stiffness characteristics of vanishing mixtures, which consist of sand and salt particles at different volume fractions. Experiments are carried out in a conventional oedometer cell (Ko-loading) integrated with bender elements for the measurement of shear waves. Dissolutions of particles are implemented by saturating the mixtures at various confining stresses. Axial deformation and shear waves are recorded after each loading stage and during dissolution process. Experimental results show that after dissolution, the vertical strain and the void ratio increase, while the shear wave velocity and small strain shear modulus decrease. The decrease of the velocity results from the void ratio increase and particle contact decrease. The process monitoring during dissolution of the particles shows that the vertical strain dramatically increases at the beginning of the saturation process and converges after vanishing process finishes, and that the shear wave velocity decreases at the beginning and increases due to the particle reorientation. Specimens prepared by sand and salt particles are proved to be able to provide a valuable insight in macro structural behaviors of the vanishings mixtures.

• Science of Emotion and Sensibility
• /
• v.26 no.1
• /
• pp.79-86
• /
• 2023

This study aims to create a highly conductive E-textile made by recycling PET with a Dip-coating process. PET fiber with hydrophobic properties is characterized by the difficulty in imparting great conductivity when both Virgin and Recycled are made of electronic fibers through a Dip-coating process. To advance the effectiveness of the Dip-coating process, a sample made of recycled PET was surface modified for 50 w 5 minutes and 10 minutes employing a Covance-2mprfq model from FEMTO SCIENCE. After that, the sample was immersed in an SWCNT dispersion (.1 wt%, Carbon Co., Ltd.) for 5 minutes, and then dip coating was conducted to allow the solution to permeate well into the sample through a padder (DAELIM lab). After the procedure was completed, the resistance measurement was measured with a multimeter at both ends and then accurately remeasured with a wider electrode. As a result of this contemplation, it was affirmed that great conductivity might be given through an impregnation process through the plasma surface modification. When the surface modification was performed for 10 minutes, the resistance was reduced by up to 2.880 times. Dependent on the results of this research, E-fibers employed in the smart wearable sector can also be made of recycled materials, improving smart wearable products that can save oil resources and reduce carbon emissions.

• Korean Journal of Cognitive Science
• /
• v.25 no.3
• /
• pp.211-232
• /
• 2014

People search a certain object or a person so many time in a day. Besides the information about what the target is, perceptual information of the target can influence on the search process. In the current study, using an eye-tracker we aimed to examine whether the perceptual information of previewing target stimuli on the visual search process of the target and the task performance. Participants had to identify the previewing target stimulus presented in the middle of the screen, and then had to search the target among 8 items presented in a circle array, and had to decide whether the size of the target in the search display was same as that of the previewing stimulus. The experimental conditions were divided into 8 within-subject conditions by whether the search display was consisted of all the same size items or different size items (homogeneous search display vs. inhomogeneous search display), by the size of the preview target stimulus, and by the size of the target stimulus in the search display. Research hypothesis is that the size information of the previewing influence on the visual search process of the target and task performance when the items in the search display are in different sizes. In the results of behavioral data analysis, the reaction time showed the main effect of the search display, and the size of the target stimulus in the search display. and the interaction between the size consistency effect of target stimulus and the search display condition. In the results of analysis of eye-movement information, the Initial Saccade to Target Ratio measurement showed the interaction between the size consistency effect of target stimulus and the search display condition as the reaction time measurement did. That is, the size consistency effect of target stimulus only in the inhomogeneous search display condition indicated that participants searched the items in the same size as that of preview target stimulus. Post-hoc analyses revealed that the search and task performance in the inhomogeneous display condition were faster when the target size was consistent, but rather slower when the target size was inconsistent.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.3A
• /
• pp.297-307
• /
• 2010

Recently, maintenance engineering and technology for civil and building structures have begun to draw big attention and actually the number of structures that need to be evaluate on structural safety due to deterioration and performance degradation of structures are rapidly increasing. When stiffness is decreased because of deterioration of structures and member cracks, dynamic characteristics of structures would be changed. And it is important that the damaged areas and extent of the damage are correctly evaluated by analyzing dynamic characteristics from the actual behavior of a structure. In general, typical measurement instruments used for structure monitoring are dynamic instruments. Existing dynamic instruments are not easy to obtain reliable data when the cable connecting measurement sensors and device is long, and have uneconomical for 1 to 1 connection process between each sensor and instrument. Therefore, a method without attaching sensors to measure vibration at a long range is required. The representative applicable non-contact methods to measure the vibration of structures are laser doppler effect, a method using GPS, and image processing technique. The method using laser doppler effect shows relatively high accuracy but uneconomical while the method using GPS requires expensive equipment, and has its signal's own error and limited speed of sampling rate. But the method using image signal is simple and economical, and is proper to get vibration of inaccessible structures and dynamic characteristics. Image signals of camera instead of sensors had been recently used by many researchers. But the existing method, which records a point of a target attached on a structure and then measures vibration using image processing technique, could have relatively the limited objects of measurement. Therefore, this study conducted shaking table test and field load test to verify the validity of the method that can measure multi-point displacement responses of structures using image processing technique.

• International Journal of Control, Automation, and Systems
• /
• v.1 no.3
• /
• pp.282-288
• /
• 2003

It is known that HIV (Human Immunodeficiency Virus) infection, which causes AIDS after some latent period, is a dynamic process that can be modeled mathematically. Effects of available anti-viral drugs, which prevent HIV from infecting healthy cells, can also be included in the model. In this paper we illustrate control theory can be applied to a model of HIV infection. In particular, the drug dose is regarded as control input and the goal is to excite an immune response so that the symptom of infected patient should not be developed into AIDS. Finite horizon optimal control is employed to obtain the optimal schedule of drug dose since the model is highly nonlinear and we want maximum performance for enhancing the immune response. From the simulation studies, we found that gradual reduction of drug dose is important for the optimality. We also demonstrate the obtained open-loop optimal control is vulnerable to parameter variation of the model and measurement noise. To overcome this difficulty, we finally present nonlinear receding horizon control to incorporate feedback in the drug treatment.