• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.22 no.3
• /
• pp.285-291
• /
• 2004

GPS photogrammetry or the GPS/INS photogrammetry, which are based on the direct measurement of the projection centers and attitude at the moment of camera exposure time through loading the GPS receiver or INS in aircraft. Both photogrammetric methods can offer us to acquire the exterior orientation parameters with only minimum ground control points, even the ground control process could be completely skipped. Consequently, we can drastically reduce the time and cost for the mapping process. In this thesis, test flight was conducted in Suwon area to evaluate the performance of accuracy and efficiency through the analysis of results among the three photogrammetric methods, that is, traditional photogrammetry, GPS photogrammetry and GPS/INS photogrammetry. Test results shows that a large variety of advantages of GPS photogrammetry and GPS/INS photogrammetry against traditional photogrammetry is to be verified. Especially, the number of ground control points for the exterior orientation could be saved more than 70～80%, respectively.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.7
• /
• pp.784-790
• /
• 2012

In this paper, an all-digital CMOS ultra-wideband(UWB) pulse generator for high band(6~10 GHz) frequency range is presented. The pulse generator is designed and implemented with extremely low power and low complexity. It is designed to meet the FCC spectral mask requirement by using Gaussian pulse shaping circuit and control the center frequency by using CMOS delay line with shunt capacitor. Measurement results show that the center frequency can be controlled from 4.5 GHz to 7.5 GHz and pulse width is 1.5 ns and pulse amplitude is 310 mV peak to peak at 10 MHz pulse repetition frequency(PRF). The circuit is implemented in 0.13 um CMOS process with a core area of only $182{\times}65um^2$ and dissipates the average power of 11.4 mW at an output buffer with 1.5-V supply voltage. However, the core consumes only 0.26 mW except for output buffer.

• Human Ecology Research
• /
• v.56 no.3
• /
• pp.247-262
• /
• 2018

This study investigates the process of PCK formation for 2017 novice teachers in Busan. This study was conducted parallel to quantitative research using the H-PCK measurement tool as well as qualitative research methods through an open questionnaire and after-interview. Consequently, the H-PCK level of novice teachers was 3.51. The knowledge of perspective on home economics education (KP) was 3.87, knowledge of home economics curriculum (KC) was 3.37 and the knowledge of home economics instructional strategies (KI) was 3.39. Study participants reported that curriculum knowledge, curriculum content knowledge, and teaching strategy knowledge were formed through preparation for appointment; however, it was not possible to judge if PCK was formed for the restructuring ability or the reconstruction ability. Knowledge related to curriculum content was learned through teacher training, internet teacher community, and internet information materials. Knowledge of teaching strategies was learned through 1-2 teaching consulting or peer scholarship. It is necessary to revise the university curriculum (such as expansion of curriculum education, expansion of experience in teaching practice, and actual case study) order to form PCK. Second, it should be developed and operated various training programs for the formation of home economics education curriculum knowledge. Third, it is necessary to organize a nationwide system to support the mentor. In the future, it is necessary to study PCK analysis for each unit and topic as well as to explain methods that can be provided to field teachers.

• Journal of the Korean Ceramic Society
• /
• v.35 no.8
• /
• pp.813-818
• /
• 1998

A simple method to measure the elastic modulus E and Poisson's ratio v of diamod-like carbon (DLC) films deposited on Si wafer was suggested. Using the anisotropic etching technique of Si we could make the edge of DLC overhang free from constraint of Si substrate. DLC film is chemically so inert that we could not on-serve any surface damage after the etching process. The edge of DLC overhang free from constraint of Si substrate exhibited periodic sinusoidal shape. By measuring the amplitude and the wavelength of the sinu-soidal edge we could determine the stain of the film required to adhere to the substrate. Since the residual stress of film can be determine independently by measurement of the curvature of film-substrate com-posite we could calculated the biaxial elastic modulus E/(1-v) using stress-strain relation of thin films. By comparing the biaxial elastic modulus with the plane-strain modulus E/(1-{{{{ { v}^{2 } }}) measured by nano-in-dentation we could further determine the elastic modulus and Poisson's ratio independently. This method was employed to measure the mechanical properties of DLC films deposited by {{{{ { {C }_{6 }H }_{6 } }} rf glow discharge. The was elastic modulus E increased from 94 to 169 GPa as the {{{{ { V}_{ b} / SQRT { P} }} increased from 127 to 221 V/{{{{ {mTorr }^{1/2 } }} Poisson's ratio was estimated to be abou 0.16∼0.22 in this {{{{ { V}_{ b} / SQRT { P} }} range. For the {{{{ { V}_{ b} / SQRT { P} }} less than 127V/{{{{ {mTorr }^{1/2 } }} where the plastic deformation can occur by the substrate etching process however the present method could not be applied.

• Journal of the Microelectronics and Packaging Society
• /
• v.16 no.3
• /
• pp.61-65
• /
• 2009

We produced noble surface structure of crystalline Si for solar cells by using preferential aqueous etching on crystallographic defects which were induced by grinding process. We analyzed the reflectance of textured surface according to surface topography resulting from various etchant concentrations and duration of etching process. The crystallographic defects and textured surface topography were investigated by using transmission electron microscopy and secondary electron microscopy, respectively. Also, the measurement of reflectance of textured surface utilizes spectrophotometer. The optimized texture surface exhibits improved result indicating reflectance of below ave. 1%. And it is cost-effective as well as taking short time within a few minutes.

• Journal of the Microelectronics and Packaging Society
• /
• v.16 no.3
• /
• pp.53-59
• /
• 2009

Low pressure mercury lamp type UV equipments have been widely used for cleaning and modification of PCB surfaces. To enhance the productivity of the process, we newly developed remote DBD type atmospheric pressure plasma equipment. The productivity of both equipments could be compared by measuring surface contact angle for various transferring speed. By the result of the measurement, we could verify that the productivity of the atmospheric pressure plasma be superior to the productivity of the UV equipment. XPS experiments confirmed that the surface effect of the UV and atmospheric pressure plasma processing are similar for each other. Organic contamination level was reduced after the processing and some surface elements were oxidized for both cases. Finally, the atmospheric pressure plasma equipment was adapted to flip chip BGA's flux printing process and it was concluded that the printing uniformity be enhanced by the atmospheric pressure plasma surface treatment.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.1
• /
• pp.501-512
• /
• 2018

Radio frequency identification (RFID) sensor tag provides several advantages including battery-less operation and low cost, which are suitable for long-term monitoring. This paper presents a self-powered RFID temperature sensor tag for online temperature monitoring in substation. The proposed sensor tag is used to measure and process the temperature of high voltage equipments in substation, and then wireless deliver the data. The proposed temperature sensor employs a novel phased-locked loop (PLL)-based architecture and can convert the temperature sensor in frequency domain without a reference clock, which can significantly improve the temperature accuracy. A two-stage rectifier adopts a series of auxiliary floating rectifier to boost its gate voltage for higher power conversion efficiency. The sensor tag chip was fabricated in TSMC $0.18{\mu}m$ 1P6M CMOS process. The measurement results show that the proposed temperature sensor tag achieve a resolution of $0.15^{\circ}C$/LSB and a temperature error of $-0.6/0.7^{\circ}C$ within the range from $-30^{\circ}C$ to $70^{\circ}C$. The proposed sensor tag achieves maximum communication distance of 11.8 m.

• Journal of the Institute of Convergence Signal Processing
• /
• v.5 no.3
• /
• pp.181-189
• /
• 2004

This paper describes the method for detecting vehicles in the rear and rear-side at night by using headlight features. A headlight is the outstanding feature that can be used to discriminate a vehicle from a dark background. In the segmentation process, a night image is transformed to a binary image that consists of black background and white regions by gray-level thresholding, and noise in the binary image is eliminated by a morphological operation. In the feature extraction process, the geometric features and moment invariant features of a headlight are defined, and they are measured in each segmented region. Regions that are not appropriate to a headlight are filtered by using geometric feature measurement. In region classification, a pair of headlights is detected by using relational features based on the symmetry of a pair of headlights. Experimental results show that this method is very applicable to an approaching vehicle detection system at nighttime.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.26 no.5
• /
• pp.663-674
• /
• 2002

The objectives of this study were 1) to ascertain whether there was a difference in product performance (expressive or instrumental), which consumer recognized after using, related to consumer involvement toward clothing, 2) to clarify the effect of product performance on consumption emotion(positive or negative), 3) to investigate the effect of consumption emotion on satisfaction, and 4) to find out whether product performance had a direct effect on satisfaction toward product. The study was conducted in three steps. Through the two steps, measurement instruments were developed. At the last step, judgement sampling method were utilized to collect the data and subjects were 614 university students. Confirmatory factor analysis and structural equation model analysis were used to analyze the data. The results were as follows: 1) Consumer involvement had an effect on product performances but it was related to the expressive product performance more than to the instrumental product performance. 2) Product performance had positive influence on positive consumption emotion, while it had negative influence on negative consumption emotion. The results revealed that there were significant relationships between product performance and consumption emotion. 3) Positive consumption emotion had a positive effect on consumer satisfaction, on the other hand negative consumption emotion had a negative effect on consumer satisfaction. 4) Although the direct effects of product performances on satisfaction were larger than the indirect effects, product performance was greatly influential in consumption emotion and consumption emotion was strongly related to consumer satisfaction. Therefore, consumption emotion is an important determinant variable in the process of consumer satisfaction.

• Journal of Astronomy and Space Sciences
• /
• v.33 no.4
• /
• pp.287-293
• /
• 2016

The equatorial region of the Earth's ionosphere exhibits large temporal variations in electron density that have significant implications on satellite signal transmissions. In this paper, the first observation results of the variations in the trough of the equatorial ionospheric anomaly at the permanent Global Navigation Satellite System (GNSS) site in Chuuk (Geographic: $7.5^{\circ}N$, $151.9^{\circ}E$; Geomagnetic: $0.4^{\circ}N$) are presented. It was found that the daytime Global Positioning System (GPS) total electron content (TEC) values vary according to the 27 day period of solar rotation, and that these trends show sharp contrast with those of summer. The amplitudes of the semi-annual anomaly were 12.4 TECU (33 %) on $19^{th}$ of March and 8.8 TECU (23 %) on $25^{th}$ of October respectively, with a yearly averaged value of 38.0 TECU. The equinoctial asymmetry at the March equinox was higher than that at the October equinox rather than the November equinox. Daily mean TEC values were higher in December than in June, which could be interpreted as annual or winter anomalies. The nighttime GPS TEC enhancements during 20:00-24:00 LT also exhibited the semi-annual variation. The pre-midnight TEC enhancement could be explained with the slow loss process of electron density that is largely produced during the daytime of equinox. However, the significant peaks around 22:00-23:00 LT at the spring equinox require other mechanisms other than the slow loss process of the electron density.