• Journal of the Korean Society for Precision Engineering
• /
• v.11 no.6
• /
• pp.168-178
• /
• 1994

This paper presents an optical surface roughness sensor developed for intermediate- process measurement on the machine. The light scattering method is adopted for the sensor, which is designed conpact and flexible enough to apply to 'on the machine' measurement of surface roughness. The developed sensor has special features such that it makes use, as the measurement parameter, of the ratio between fluxes of the incident light, and the specularly and partly diffusely reflected light, and that it can adjust the incident light angle. The experimental investigation reveals not only the sensor has good performance as a surface roughness sensor but the sensor is very robust so as to be useful in in-process measurement.

• Journal of Information Technology Services
• /
• v.10 no.2
• /
• pp.141-162
• /
• 2011

The controls of Information Systems (IS) have been an more critical issue controls as the sophistication and integration of IS is more proceeded. ITGI (The Information Technology Governance Institute) of ISACA (Information Systems Audit and Control Association) has suggested COBIT (Control Objectives for Information and related Technology) and this has been widely recognized the evaluation model of IS controls. In COBIT, IS was evaluated in terms of process, information quality, and IT resources. This study used COBIT in order to suggest and empirically test an evaluation model of IS service. The data was collated from one major Chinese SI (Systems Integration) company in four domains of processes : planning and organization, acquisition and implementation, delivery and support, and monitoring. Seven factors are extracted using an exploratory factor analysis as follows : Overall IT planning process, technological assessment process in IT planning of IT, cost-benefit assessment process in IT planning, implementation process, support process, monitoring process, post-implementation evaluation process. The results of confirmatory analysis of three alternative measurement models indicated that the measurement model with one inherent or conceptual variable has greater model fitness than the other models. This study suggests the logical and general way to test and apply COBIT in evaluating IS services.

• Journal of Korean Society for Quality Management
• /
• v.22 no.2
• /
• pp.41-50
• /
• 1994

Consider a canning process where cans are filled with an expensive ingredient. Cans weighting above the specified limit are sold in a regular market for a fixed price, and underfilled cans are emptied and refilled at the expense of a reprocessing cost. In this paper, the effect of measurement error on the determination of the optimal process mean for a canning process is examined. It is assumed that the quantity X of ingredient in a can is normally distributed with unknown mean and known variance, and the observed value Y of X is also normally distributed with known mean and variance. A profit model is constructed which involves selling price. cost of ingredients, reprocessing cost. and cost from an accepted nonconforming can, and methods of finding the optimal process mean and the cutoff value on Y are presented. It is shown that the optimal process mean increases. and the expected profit decreases when the measurement error is relatively large in comparison to the process variance.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.7 no.3
• /
• pp.81-86
• /
• 2008

I present a 3-D profiler specially devised for the profile measurement of specular surfaces that requires precision shape accuracy up to a few nanometer. A profile is reconstructed from the curvature of a test part of the surface at several locations along a line. The local curvature data are acquired with White-light Scanning Interferometry. Test measurement proves that the proposed profiler is well suited for the specular surface inspection like precision mirror.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.7 no.1
• /
• pp.47-52
• /
• 2008

We present a 3-D profiler specially devised for the profile measurement of rough surfaces that are difficult to be measured with conventional non-contact interferometer. The profiler comprises multiple two-point-diffraction sources made of single-mode optical fibers. Test measurement proves that the proposed profiler is well suited for the warpage inspection of microelectronics components with rough surface, such as unpolished backsides of silicon wafers and plastic molds of integrated-circuit chip package.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.113-114
• /
• 2008

Conventional furnace annealing (CFA) for activating Mg-doped p-type GaN films had been performed in pure $N_2$ ambient. All sample activated the same gas ambient. The annealing process change temperature: the first process is performed at $550^{\circ}C$ for 10 min. but, the first process is the same bulk. From second to five process increase activation temperature to change $50^{\circ}C$ and annealing time keeping for 10 min. It is found that the samples characteristic measure hall measurement. Similar results were also evidenced by photoluminescence (PL) measurement.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.654-658
• /
• 2002

The purpose of this paper is to establish an effective featured based inspection planning system for OMM(On-Machine Measurement) process. In this system, an effective inspection process planning is accomplished by determining the number of measuring points, their locations and probing paths using fuzzy logic, Hammersley method and TSP problem. Also, an effective collision-free algorithm Is proposed based on the EZ-map analysis. All the inspection planning processes are performed based on the defined inspection features those are derived from the CAD database. Proposed inspection planning method is simulated for the given sample wrokpieces, and the results are analyzed. The results show that the proposed method can be successfully implemented in real OMM process.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.4
• /
• pp.1309-1314
• /
• 2014

The measurement of stator core loss for an induction motor at each manufacturing process is carried out in this paper. Iron loss in the stator core of induction motor changes after each manufacturing process due to the mechanical stress, which can cause the deterioration of the magnetic performances. This paper proposes a new iron loss measuring system of the stator core in an induction motor, which can be applied to the case when the distribution of magnetic flux density is not uniform along the magnetic flux path. In the system, the iron loss is calculated based on the induced voltage of the B-search coil and exciting current.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.14 no.4
• /
• pp.151-159
• /
• 2015

In this study, we developed an automated contact-type thickness measurement machine that continuously and precisely measures the thickness of a PCB module product using multi-LVDT sensors. The system contains a measurement part to automatically measure the thickness in real time according to the set conditions with an alignment supply unit and unloading unit to separate OK and NG products. The sensors were calibrated before assembly in the measuring machine, and precision and accuracy performance tests were also performed to reduce uncertainty errors in the measurement machine. In the calibration test, the precision errors of the LVDT sensor were determined to be $1-3{\mu}m$ as 0.1% at the measuring range. A measurement error of 0.8 mm and 1.0 mm thickness test standards were found to be $1{\mu}m$ and $4{\mu}m$, and the standard deviations of two 1.0 mm products were measured as $14{\mu}m$ and $8{\mu}m$, respectively. In the measurement system analysis, the accuracies of test PCB standards were found to be $2{\mu}m$ and $3{\mu}m$, respectively. From the results of gage repeatability and reproducibility (R & R) crossed, we found that the machine is suitable for the measurement and process control in the mass production line as 7.92% of total gage R & R and in seven distinct categories. The maximum operating speed was limited at 13 pcs/min, showing a value good enough to measure.

• Journal of Korean Institute of Industrial Engineers
• /
• v.37 no.2
• /
• pp.153-162
• /
• 2011

The demands of complicated data communications have issued a new challenge to port logistics systems. Customers expect ports to handle their generated administrative data while a vessel is docked in a port. One port logistics system, known as the Vessel Clearance Process (VCP), manages large numbers of documents related to port of entry. In the VCP, information flows through many organizations such as the port authority, shipping agents, marine offices, immigration offices, and others. Therefore, for effective management of the Business Process (BP) of the VCP, a standardized method of BP modeling is essential, especially in heterogeneous system environments. In a port, according to port policy, terms and data are sued that are similar to but different from those of other logistics partners, which hinders standardized modeling of the BP. In order to avoid tedious and time-consuming document customization work, more convenient modeling of BP for VCP is essential. This paper proposes an ontology-based process similarity measurement to assist designer for process modeling in port domain, especially VCP. We expect that this methodology will use convenient and quick modeling of port business processes.