• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.6
• /
• pp.860-868
• /
• 2009

To provide adequate fit for women over a range of sizes, the grading process should reflect their body dimensions. Current methods of creating sized garments are not addressing the need for a good or even an adequate fit for the easy-order system. This study suggests a grading rule allocating system that can improve the appropriateness of clothing for uniform easy-order system. Also, the study proposes a bi-directional grading method subdivided to horizontal and vertical direction. The grading rule allocating system suggested the size increments which improve the fitness of uniform. Using the 5th Size Korea data, the crosstabulation was conducted with 1305 females in the age group $20{\sim}49$ years, and the size increments including $155\sim165$ of height section and $79\sim94$ of bust section, was selected for easy-order system. Also, the bi-directional grading method subdivided in horizontal and vertical direction was followed by factor analysis based on the circumference and height. And the grading rules were calculated by regression analysis.

• Journal of Biosystems Engineering
• /
• v.19 no.2
• /
• pp.124-137
• /
• 1994

Visual features of a mushroom(Lentinus Edodes, L.) are critical in grading and sorting as most agricultural products are. Because of its complex and various visual features, grading and sorting of mushrooms have been done manually by the human expert. To realize the automatic handling and grading of mushrooms in real time, the computer vision system should be utilized and the efficient and robust processing of the camera captured visual information be provided. Since visual features of a mushroom are distributed over the front and back sides, recognizing sides and states of the stalk including the stalk orientation from the captured image is a prime process in the automatic task processing. In this paper, the efficient and robust recognition process identifying the front and back side and the state of the stalk was developed and its performance was compared with other recognition trials. First, recognition was tried based on the rule set up with some experimental heuristics using the quantitative features such as geometry and texture extracted from the segmented mushroom image. And the neural net based learning recognition was done without extracting quantitative features. For network inputs the segmented binary image obtained from the combined type automatic thresholding was tested first. And then the gray valued raw camera image was directly utilized. The state of the stalk seriously affects the measured size of the mushroom cap. When its effect is serious, the stalk should be excluded in mushroom cap sizing. In this paper, the stalk removal process followed by the boundary regeneration of the cap image was also presented. The neural net based gray valued raw image processing showed the successful results for our recognition task. The developed technology through this research may open the new way of the quality inspection and sorting especially for the agricultural products whose visual features are fuzzy and not uniquely defined.

• Journal of Korean Society of Rural Planning
• /
• v.20 no.3
• /
• pp.131-141
• /
• 2014

This study aimed at setting up the grading indicator standards on development stages for phasing the continuous development process. To achieve the objective of this study, after referring to the proposed cases derived from the reference analysis, the development stages were classified. Also grading criteria of indicators according to development stages were established through the statistical analysis and expert group checking. Development stages of rural village were stepped into 4-stages through the reviews and analysis of reference literature ; preparation-entry-development-advanced stage. Reasonable achievement level of each development stage was established by considering the necessary development period and benchmarking reference target together. On the basis of these clear stepwise development phases, the grading criteria were proposed for determination of the incumbent development stages.

• The Journal of the Korean dental association
• /
• v.58 no.5
• /
• pp.284-291
• /
• 2020

This study analyzed the change in the rater reliability based on the student's practice evaluation process conducted at Yonsei University College of Dentistry. Through this, we suggest the significance of the rater calibration training in the student's practical evaluation of dental college. Nine professors from the department of Conservative Dentistry, Yonsei University College of Dentistry, analyzed the results of class II restoration cases twice in 2017 and once in 2018. Intra Class Correlation (ICC) which is a statistic used to determine the consistency of raters with three or more scores, was also calculated. ICC values increased as raters participated in rater calibration meetings and grading experiences. This shows that the rater reliability is related to the grading experience and feedback from calibration meeting. Based on the results of previous studies that grading experiences and rater calibration training can cause a meaningful change in rater behavior, we propose to conduct rater calibration training to ensure the evaluator reliability.

• Journal of the Korean Society of Costume
• /
• v.22
• /
• pp.345-356
• /
• 1994

The Shirts Blouse was produced through the process of shirts Blouse pattern making by utilizing CAD System developed by PAD Sys-tem Techologies Co. Ltd that is suitable to educational use or industrial use. The purpose of this study was to provide the basic data for the development of efficient and various design patterns by applying this pro-cess to the actual business of apparel making. The results were as follows: 1. The applicable range of CAD system 1) The repeated work can be avoided by thansforming and developing the basic pattern stored and the storage and remodification were easy. 2) The deletion duplication movement and copy of all points and lines in the pattern can be made freely and measurement of all lengths and angles the attachment of two patterns were possible. 3) The grading Library of the basic pattern was applied as it was and the time was curtailed by adding only several grading points with the change of design. 2. The problem in the use of the CAD System 1) Through the input of basic pattern by the digitizer the minute size difference was generated as each point on the curve came to be designated. 3) In grading the line of neck girth there was inconveniences to go to the plan view in order find out deviation.

• The Mathematical Education
• /
• v.47 no.4
• /
• pp.487-503
• /
• 2008

In this paper, descriptive assessment method for middle school mathematics was evaluated by developing a framework for designing and grading problems for descriptive assessment and analyzing the effectiveness of the problems. The new descriptive assessment problems were developed by reviewing the current 7th National Mathematics Curriculum of Korea and aligned mathematics textbooks to define a set of problem design principles and evaluation framework for the assessment strategy. The developed problems were first pilot tested and then revised based on the feedback from the test. The final version was field tested by 100 students in 7th grade middle school. After the field test, the problems were graded by two middle school math teachers and one math education researcher to determine the overall correlation between graders and also to analyze effectiveness of the evaluation framework of the test. This result of this study is expected to assist in the further development of descriptive problems and grading framework by providing a reference work for teachers to better understand the process and the limitations of executing the new assessment strategy.

• Journal of the Korean Geotechnical Society
• /
• v.38 no.7
• /
• pp.25-37
• /
• 2022

In this paper, a small-scale model testing system was developed using a series of small-scale model tests to analyze the mechanism of compaction pile formation and evaluate the quality of controlled grading aggregates proposed as an alternative material to the sand compaction pile (SCP) method and granular compaction pile (GCP). These are the most typical ground improvement methods in field practice, particularly for soft grounds. However, the SCP has faced difficulties due to the supply shortage of natural sand and the corresponding price surge of sand. The GCP is limited in marine soft grounds because of the failure occurring at the pile tip caused by excessive expansion of the deeper bulbs, leading to uneven bulb formation. The uniformity of compacted pile bulbs is critical to ensuring the bearing capacity and quality of the compaction pile. This study aims to evaluate the performance of the new material and controlled grading aggregates using small-scale model tests simulating field compaction process to investigate its potential application in comparison with SCP. The compaction piles are examined in four cases according to different materials used for compaction pile and clay strength. The compaction pile materials, which are made of sand and controlled grading aggregates, used in this study were compared to reveal the mechanism of the bulb creation. The experimental data confirm that the bulb formation quality of the traditional sand and the new material, controlled grading aggregates are comparable. The compaction pile made of controlled grading aggregates presents higher bearing capacity than that of marine sand.

• Journal of The Korean Association of Information Education
• /
• v.2 no.1
• /
• pp.19-34
• /
• 1998

For the purpose of adapting positively to the information society, it is very important to develop the capabilities of the retrieve, gather, process and application for informations by making efficient use of computers. So, with a view to understanding the importance of computer and adjusting actively to the information society, the systematic policy to cultivate the ability of making the most of computers is strongly demended. Therefore this study is to make a curriculum and guide for improving the capability of applying computers systematically, through analyzing a curriculum of computer in Elementary, Middle and High Schools, and to develop a model of grading system to cultivate the ability of applying computers, which grades capabilities of its practical use.

• Journal of the Korean Society of Costume
• /
• v.20
• /
• pp.49-62
• /
• 1993

The purpose of this research was to utilize of Pattern Design System(P.D.S) by using AM-300 The conclusion were like these : 1. A coat of basic pattern was selected by design sketch. 2. The basic pattern was input into computer by digitizing. 3. The basic pattern was change into designed shape by using various skills. This system were enabled to draw straight lines, curves, delete lines, sections of lines, extend lines, cut pattern into sections, measure line or section reproduce whole pattern shape of section, rotate and mirror pattern and complete patterns. 4. Automatic grading of finished master pattern have been developed by creation and modification of grading rules of basic pattern. 5. Production pattern added seam allowance, not-ches was generated by P.D.S menu option. 6. Finished pattern design was plotted out 100% and 20% size by AM-300 Plotter. This results will be the basic materials to develop the CAD SYSTEM if some problems were improve. Furthermore, the utilization of P.D.S is expected to be developing in pattern making process.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2016.05a
• /
• pp.195-196
• /
• 2016

Oyster shell is produce by shucking process in oyster farming in southern coast of Korea. In average, about 6.7kg of oyster shell is produced as an industrial waste for 1kg of oyster flesh, and even only in last year, it is estimated that about 150,000 ton of oyster shell is produced. Oyster shell is light weighted and the strength characteristic of it is similar to send. So we would like to test if it is avail to use oyster shell crust as fine aggregate. So we use a crusher to crush oyster shell and review its particle distribution for materialization.