• 대한인간공학회지
• /
• 제26권1호
• /
• pp.71-77
• /
• 2007

Shoe's size and shape are determined by the last that takes shape of foot because last is the mold of shoe in development and manufacturing process. Then adaptation between foot and shoe is dependent on the last. In mass shoe production, model size is developed in the first place, other sized lasts are made through the grading process based on model size. The most important factor in grading system is grading deviation that must be same amount induced from foot measuring database. At present, most of the last manufacturing companies in korea using 260mm as a standard foot model size. When length grading deviation is 5mm, the ball girth grading deviation is 3.7mm and the ball width grading deviation is 1.2mm. I verified existing grading system by comparing grading results with foot measuring data. Also, I proposed reasonable grading deviation and application method of grading system. From the analysis of foot measuring database, reasonable grading deviations are 1.22mm in ball width and 0.84mm in ankle height in case of length grading deviation is 5mm. I confirmed that the current grading system is very accurate. When we grade last from 230mm to 290mm by current grading system based on model size 260mm, there is grading error over 1mm in the front outside area of foot. This error level of 1mm is no problem in normal walking shoe's last, but it induces adaptation problems in sports and special purposed shoe's last. Therefore using of three standard model size is recommended in grading men's last for reducing grading deviation error under the level of 1mm. It is specifically described as 235mm in 225-245mm, 260mm in 250-270mm, 285mm in 275-295mm. According to the above recommended grading system, it is enough to measure only three foot sizes in case of foot measuring project for men's last development.

• 한국지능정보시스템학회:학술대회논문집
• /
• 한국지능정보시스템학회 2001년도 The Pacific Aisan Confrence On Intelligent Systems 2001
• /
• pp.237-245
• /
• 2001

Automated essay grading has been proposed for over thirty years. Only recently have practical implementations been constructed and tested. This paper investigated the role of the nearest-neighbour algorithm within the information retrieval as a way of grading the essay automatically called Automated Essay Grading System. It intended to offer teachers an individualized assistance in grading the student\`s essay. The system involved several processes, which are the indexing, the structuring of the model answer and the grade processing. The indexing process comprised the document indexing and query processing which are mainly used for representing the documents and the query. Structuring the model answer is actually preparing the marking scheme and the grade processing is the process of assessing the essay. To test the effectiveness of the developed algorithms, the algorithms are tested against the History text in Malay. The result showed that th information retrieval and the nearest-neighbour algorithm are practical combination that offer acceptable performance for grading the essay.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집C
• /
• pp.140-145
• /
• 2001

Lasting machines for shoe manufacturing are continuously developed with the aid of automation and Computer Aided Manufacturing (CAM). Adaptive lasting machine and CAD data of a shoe last are inevitably introduced for the labor-free manufacturing process. Recently, method for the CAD datarization of a shoe last is suggested using finite element mesh system. Initial set up data and control data of machine parts are required for the adaptive lasting machine. For the efficient process, grading of those data is essential to minimize data storage and production costs. In this paper, bonding lines are extracted from the CAD data of a shoe last and graded by the geometric grading system. Tension spline method is adopted for the interpolation of last CAD data. The results are compared with the results from the arithmetic grading system that is widely adopted in the shoemaking companies.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2001년도 추계종합학술대회
• /
• pp.363-366
• /
• 2001

현재 육안에 의한 피혁의 등급 판정 과정은 장시간 시 피로에 의한 일관성 결여로 인해 판정 결과에 대한 신뢰성을 주지 못한다. 따라서 피혁의 품질을 결정하기 위한 객관적인 지표와 이를 기준으로 등급 판정 과정의 자동화가 필요하다. 본 논문에서 적용된 피혁 자동 선별 시스템은 피혁에 대한 정보를 취득하는 과정과 이들 정보로부터 등급을 판정하는 과정으로 구성된다. 피혁의 품질은 조밀도와 결함의 종류 및 분포도와 같은 피혁 정보에 의해 결정된다. 본 논문에서는 디지털 카메라에 의해 획득된 흑백 영상으로부터 피혁의 조밀도 및 결함에 대한 정보를 추출하는 알고리즘을 제안한다. 조밀도에 대한 정보는 원 영상을 주파수 영역으로 변환한 후 나타나는 퓨리에 스펙트럼 분포의 특징 값들에 의해서 추출된다. 그리고 결함에 대한 정보는 전처리 과정을 거친 영상으로부터 경계선 검출 후 검색 윈도우를 사용하여 윈도우에 해당하는 픽셀들의 통계적 수치에 의해서 검출된다. 피혁 전체에 대한 정보들은 피혁의 등급을 판정하는 지표로 사용되며 실제 머신 비젼 시스템에 적용된다.

• 대한가정학회지
• /
• 제40권11호
• /
• pp.1-9
• /
• 2002

Nowadays, the use of apparel CAD system is important to the mass production of ready to wear Especially, computer-based grading is the most important process to improve the fitness of clothes and to reduce the time needed to make patterns of several sizes. The purpose of this study was to suggest a standard sizing system for junior-high school girls' lower clothes and to suggest a grading method according to the sizing systems. The subjects were 402 junior-high school girls of 13 to 15 year's-old. The size intervals of waist girth and hip girth were 3㎝ and 4㎝ respectively. The sizing system, which had frequencies more than 4.5%, was classified 8 cases. For regular grading, two types of group were classified into 58-82/61-86/64-90/67-94 and 61-82/64-86/67-90/70-94. Among them, 61-86 and 64-86 size were adopted the basic size for the development of grading. According to the sizing system, hand-made patterns were manufactured. By measure of the each part of the slacks, new grading rule patterns were developed by each size. A new grading rule was different from the Moonwha grading rule. This result will contribute to clothing fitness of consumer and the amount of production.

• 한국컴퓨터정보학회논문지
• /
• 제19권12호
• /
• pp.267-274
• /
• 2014

컴퓨터를 활용한 강의 지원시스템은 오래전부터 개발되어 사용되고 있으나, 완벽한 강의지원이란 쉬운 일이 아니다. 따라서 본 시스템은 대학 강의에 적합한 온라인 강의지원 관리 시스템을 개발하는데 그 목적이 있다. 본 개발 시스템은 대학에서의 데이터베이스과목 관리에 목표를 두고 주로 시험과 채점관리에 초점을 맞추어 개발되었다. 강의관리를 위한 출석관리, 리포트관리, 퀴즈와 같은 수시시험관리 및 정규(중간, 기말)고사의 실시 및 채점을 주목적으로 하였다. 시험의 경우 객관식, 주관식, 단답식 그리고 SQL로 나누어 개발되었다. 특히 SQL의 경우 구분분석을 통해 채점할 수 있는 시스템을 개발함으로서 보다 효과적인 채점관리에 주력하였다. 주관식 및 단답형의 경우는 수작업을 통한 채점방식을 사용하였으며, 이 모든 과정을 학생 스스로 확인할 수 있도록 하여 채점과 관련한 문제를 해소하도록 하였다.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1996년도 International Conference on Agricultural Machinery Engineering Proceedings
• /
• pp.746-754
• /
• 1996

Grading and sorting fresh cut flowers are time consuming process. In Korea, cut flowers are sorted mostly by human inspection due to the lack of adequate machinery. In this paper, quality evaluation factors of cut flowers are discussed, and types of sorting machines existing in the market are introduced . Aspects of computer image processing in evaluation the quality of cut flowers are also discussed.

• 한국물환경학회지
• /
• 제36권3호
• /
• pp.245-254
• /
• 2020

Water quality improvement projects are being implemented without predicting the effect of water quality improvement on Lake Sapgyo. As the method of selecting the target stream for the effective conduct of water quality improvement projects the method of rating the streams were studied. To build a stream grading method, 60 major streams in the Lake Sapgyo system were monitored. The selection method of rivers subject to priority management for water quality improvement was applied to the stream grading method using the Analytic Hierarchy Process (AHP). The analysis of importance by site by stream grading method revealed the following: water quality (36.0%), flow (26.1%), travel load (13.4%), TMDL density (12.0%), TMDL (8.9%), and area (3.7%). The pollution level of the river was scored by using the stream grading method, and the ranking of 51 streams was calculated. Based on this, the group was classified into six grades (A-F). Among the groups, the F and E groups were selected as the priority management streams. Cheonan-Cheon (Cheonan City) was selected as the first stream to establish water quality improvement measures in the Lake Sapgyo system, and Seowoo-Cheon (Dangjin City) was selected as the second site, and Oncheon-Cheon (Asan City) was selected as the third site. Each local government is expected to improve the water quality improvement effect with limited resources when establishing and implementing water quality improvement measures for the streams (F group, E group) to be managed in this study.

• 한국의류산업학회지
• /
• 제6권5호
• /
• pp.634-640
• /
• 2004

Nowadays, the use of apparel CAD system is important to the mass production of ready to wear. Especially, computer-based grading is the most important process to improve the fitness of clothes and to reduce the time needed to make various size pattern. The purpose of this study was to suggest a standard sizing system for high school boys' pants and to suggest a grading method according to the sizing systems. The subjects were 217 high school boys of 16 to 18 year-old. The size intervals of waist girth and hip girth were 3 cm and 4 cm respectively. The sizing system, which had frequencies more than 4%, was classified 8 cases. Among them, 71-92 and 71-88 size were the most frequent size and were adopted the basic size for the two types of grading. According to the sizing system, hand-made patterns were manufactured. By measure of the each part of the slacks, 4 size's new grading-rule patterns were developed by each size. This result will contribute to clothing fitness of consumer and the amount of production.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1996년도 International Conference on Agricultural Machinery Engineering Proceedings
• /
• pp.607-614
• /
• 1996

A computer vision based automatic intelligent sorting system for dried oak mushrooms has been developed. The developed system was composed of automatic devices for mushroom feeding and handling, two sets of computer vision system for grading , and computer with digital I/O board for PLC interface, and pneumatic actuators for the system control. Considering the efficiency of grading process and the real time on-line system implementation, grading was done sequentially at two consecutive independent stages using the captured image of either side. At the first stage, four grades of high quality categories were determined from the cap surface images and at the second stage 8 grades of medium and low quality categories were determined from the gill side images. The previously developed neuro-net based mushroom grading algorithm which allowed real time on-line processing was implemented and tested. Developed system revealed successful performance of sorting capability of approximate y 5, 000 mushrooms/hr per each line i.e. average 0.75 sec/mushroom with the grading accuracy of more than 88%.