• 정보처리학회논문지D
• /
• 제11D권2호
• /
• pp.415-422
• /
• 2004

산업분야에서 자동화 시스템은 제품의 설계, 생산 공정의 제어, 장애 처리, 품질검사 등과 관련된 처리 과정을 자동으로 수행할 수 있도록 하여 생산성을 향상시킨다. 이러한 자동화 시스템에서 감시 및 제어에 대한 처리 과정을 기술하는 언어를 흐름 제어 언어라 한다. 현재 사용되고 있는 흐름 제어 언어는 문자 기반의 IL, ST와 그래픽 기반의 FBD, SFC, LD가 있다. 일반적으로 감시 제어 시스템에서 사용되는 소프트웨어는 사용할 수 있는 흐름 제어 언어를 2종류 이하로 제한하고 있고, 동일한 시스템 환경에서는 언어의 혼용을 통한 통합 시뮬레이션이 불가능하다. 본 논문에서는 흐름 제어 언어의 특성을 분석하고 기존 시스템 환경에서 언어 작성 및 처리 과정에 대하여 분석하고, 언어의 통합 처리를 위하여 고급언어 형태의 ST를 확장한 EST 언어를 제안하였다. 이러한 연구를 기초로 그래픽 언어인 FBD, LD, SFC를 통합 처리하여 EST로 변환하는 그래픽 언어 편집기와 EST를 저급언어인 교로 변환하는 EST-IL변환기를 구현하였다. 이러한 편집기 및 변환기를 통한 교 기반의 시스템 구현 및 실험 결과는 흐름 제어 언어의 통합 처리 방안을 제시한 것이다.

• 한국철도학회논문집
• /
• 제10권4호
• /
• pp.438-443
• /
• 2007

This paper proposes an integrated SE process for the development of railway systems with safety assessment included. Although the safety assessment process must be performed with SE process properly with good coordination, the interfaces between the two processes have not been clear. Thus, in many of safety critical system developments in Korea, it is difficult to assess safety in proper development phase. The process model proposed in this paper is based on both the concept of system life cycle and the repetitive use of SE process. In each of development phases, appropriate safety assessment methods are described. Also the evaluation of the integrated system incorporating safety factors is described. The resultant process model is expressed by the Enhanced Functional Flow Block Diagram (EFFBD) using a CASE tool. The model also allows timeline analysis for identifying activity flow and data flow, resulting in the effective management of process. In conclusion, the integrated process enable both the SE process and safety assessment process to cooperate with each other from early development phase throughout the whole system life cycle.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.157.1-157
• /
• 2001

A new methodology is presented to diagnose faults in equipment plasma. This is accomplished by using neural networks as a pattern recognizer of radio frequency(rf) impedance match data. Using a realtime match monitor system, the match data were collected. The monitor system consisted mainly of a multifunction board and a signal flow diagram coded by Visual Designer. Plasma anomaly was effectively represented by electrical match positions. Twenty sets of fault-symptom patterns were experimentally simulated with experimental variations in process factors, which include rf source power, pressure, Ar and O$_2$ flow rates. As the inputs to neural networks, two means and standard deviations of positions were used ...

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2001년도 학술대회지
• /
• pp.422-427
• /
• 2001

건설프로젝트에서 현재 사용되고 있는 작업분류체계(Work Breakdown Structure)는 프로세스 내의 세부작업간 선·후행 관계의 불확실성과 작업의 불합리한 상호 연계성에 기인한 문제점을 내포하고 있다. 이를 해결하기 위해서 본 논문에서는 Work Structuring을 제시하여 프로세스간에 투명성을 부여하고 세부작업간의 간섭을 제거시켜 작업신뢰성을 향상할 수 있는 방안을 도출하였고 프로세스를 개선하기 위한 프로세스 디자인 다이어그램을 개발하였다. WS에 의한 프로세스 개선의 목적은 고객에게 가치를 창출시켜주면서 보다 신속하고 신뢰성 있는 작업 흐름을 만드는 것을 목적으로 하고 있으며 비가치 창출작업의 감소, 프로세스의 명료화 및 투명성 향상 등에 의의가 있다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년 학술대회 논문집 정보 및 제어부문
• /
• pp.273-275
• /
• 2006

Ladder Diagram(LD) is the most widely utilized among many sorts of existing programs using for the design of process control system. But it is very difficult to grasp sequential flow of control logic. In this paper, we proposed the method that we can control a lot of blocks. We used PLC in process control system. And, in order to design we used Sequential Function Chart(SFC). In this paper, we proposed the method of block contro. and confirmed feasibility through a simulation.

• Journal of Electrical Engineering and Technology
• /
• 제8권4호
• /
• pp.872-878
• /
• 2013

In industrial control systems, flow measurement is a very important issue. It is frequently needed to calculate how much total fluid or gas flows through a cross-section. Flow volume measurement tools use simple sampling or rectangle methods. Actually, flow volume measurement process is an integration process. For this reason, measurement systems using instantaneous sampling technique cause considerably high errors. In order to make more accurate flow measurement, numerical integration methods should be used. Literally, for numerical integration method, Rectangular, Trapezoidal, Simpson, Romberg and Gaussian Quadrature methods are suggested. Among these methods, trapezoidal rule method is quite easy to calculate and is notably more accurate and contains no restrictive conditions. Therefore, it is especially convenient for the portable flow volume measurement systems. In this study, the volume measurement of air which is flowing through a cross-section is achieved by using PLC ladder diagram. The measurements are done using two different approaches. Trapezoidal rule method is proposed to measure the flow sensor signal to minimize measurement errors due to the classical sampling method as a different approach. It is concluded that the trapezoidal rule method is more effective than the classical sampling.

• 보건행정학회지
• /
• 제4권2호
• /
• pp.111-125
• /
• 1994

In developing total hospital information system, large amount of time and expense are to be spent while its results are likely to lead itself to end-users' dissatisfaction. Some of the main complaints on the part of end-users come from insufficient consideration of end-users environment as well as inappropriate representation of their requirement in the system alalysis and design. This papre addresses some advantages of Essential Logical Modeling Process for better analysis and design, explaining by example the developmental process of the Patent Management and Accounting System for a tertiary care hospital. In the case, the Essential Model, suggested by McMenamin and Palmer, proved to be an effective tool for clear separation of analysis and design phase and for better communication among system developers and with end-users. The modeling process itself contributed to better program modularity as well, shown in a Structured Chart. Difficulties in learning how to identify' essential activities' for the modeling practice were experienced in the beginnins stage, which were, however, overcome by elaborating some heuristic guideling and by rdferring to necessary tools including State Transition Diagram, Control Flow Diagram, and so many. While full evaluation of the Essential Model usag remains to wait till the completion of the case project, its strengt in making clear distinction between analysis and design phase was enough to be attractive to system analysts. The model concepts are open to many further application fields, particularly such areas as business re engineering, process remodeling, office automation, and organizational restructuring.

• 디지털산업정보학회논문지
• /
• 제10권1호
• /
• pp.181-193
• /
• 2014

The environment of supply chains is rapidly changed to global and eco-freindly work process. However, at current environment, it is not easy to grasp work flow and to analyze energy efficiency. Improving energy efficiency and visibility for goods flow can contribute to increases in customer attitudes and reductions in overall production costs Additionally, it can lead to increases in work efficiency and reductions in overall production costs. Until recently, efforts to improve energy performance focused on manufacturing industry. Those efforts have expanded to the supply chain. In this paper, we perform business process modeling about supply chain for visibility and sustainability - information and component flows - from assembly plants to logistics. This paper defines the work and information flows by modeling the underlying logical structures of the supply chain and the business processes that determine impact of visibility and sustainability. We model processes using the modeling methodology specified by UN/CEFACT. This methodology explains business process functionality and business transactions by UML diagram. The output of this paper would be useful in grasping work flow and capturing the used energy.

• 정보처리학회논문지D
• /
• 제13D권1호
• /
• pp.67-74
• /
• 2006

소프트웨어 개발 과정에서 보안 요구사항 식별은 그 중요성으로 최근에 관심이 주목되고 있다. 그러나 기존 방법들은 보안 요구사항 식별 방법과 절차가 명확하지 않았다. 본 논문에서는 소프트웨어 개발자가 보안 위협 위치의 상태전이도로부터 보안 요구사항을 식별하는 절차를 제안한다. 이과정은 상태전이도를 작성하는 부분과 어플리케이션 의존적인 보안 요구사항을 식별하는 부분으로 구성된다. 상태전이도 작성은 1) 공격자가 소프트웨어 취약성을 이용하여 자산을 공격한다는 것에 기반하여 기존에 발생했던 보안 실패 자료를 이용하여 소프트웨어의 취약성을 위협하는 위치를 식별하고, 2) 식별된 위협 위치에 해당하는 소프트웨어 취약성을 방어, 완화시킬 수 있는 상태전이도를 작성하는 과정으로 이루어진다. 어플리케이션 의존적인 보안 요구사항 식별과정은 1) 기능 요구사항을 분석 한 후, 위협 위치를 파악하고, 각 위협 위치 에 해당하는 상태전이도를 적용하고, 2) 상태전이도를 어플리케이션 의존적인 형태로 수정한 후, 3) 보안 요구사항 추출 규칙을 적용하여 보안요구사항을 작성하는 과정으로 구성된다. 제안한 방법은 소프트웨어 개발자가 소프트웨어 개발 초기에 모델을 적용하여 쉽게 보안 요구사항을 식별하는데 도움을 준다.

• Nuclear Engineering and Technology
• /
• 제56권5호
• /
• pp.1603-1618
• /
• 2024

Emergency operation plans are indispensable elements for effective process safety management especially when unanticipated events occur under extreme situations. In the paper, a synthesis framework is proposed for the integration success path planning and performance analysis. Within the synthesis framework, success path planning is implemented through flow-directed signal tracing, renaming and reconstruction from a complete collection of Minimal Path Sets (MPSs) that are obtained using graph traversal search on GO-FLOW model diagram. The performance of success paths is then evaluated and prioritized according to the task complexity and probability calculation of MPSs for optimum action plans identification. Finally, an Auxiliary Feed Water System of Pressurized Water Reactor (PWR-AFWS) is taken as an example system to demonstrate the flow-directed MPSs search method for success path planning and performance analysis. It is concluded that the synthesis framework is capable of providing procedural guidance for emergency response and safety management with optimal success path planning under extreme situations.