• 한국초전도학회:학술대회논문집
• /
• 2007.07a
• /
• pp.74-74
• /
• 2007

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 1998.11a
• /
• pp.226-231
• /
• 1998

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.12
• /
• pp.1479-1485
• /
• 1999

This paper proposes a fuzzy decision making method for power transformer protection to identify an internal fault from other transient states such as inrush, over-excitation and an external fault with current transformer (CT) saturation. In this paper, analyzing over 300 EMTP simulations of disturbances, four input variables are selected and fuzzified. At every sampling interval from half to one cycle after a disturbance, from the EMPT simulations, different fuzzy rule base is composed of twelve if-then fuzzy rules associated with their basic probability assignments for singleton- or compound-support hypotheses. Dempster's rule of combination is used to process the fuzzy rules and get the final decision. A series of test results clearly indicate that the method can identify not only an internal fault but also the other transients. The average of relay operation times is about 12(ms). The proposed method is implemented into a Digital Signal Processor (TMS320C31) and tested.

• Journal of Electrical Engineering and Technology
• /
• v.6 no.4
• /
• pp.563-572
• /
• 2011

Reliability is an essential factor in a navigation system. Therefore, an integrity monitoring system is considered one of the most important parts in an avionic navigation system. A fault due to systematic malfunctioning definitely requires integrity reinforcement through systematic analysis. In this paper, we propose a method to detect faults of the GPS signal by using a distributed nonlinear filter based probability test. In order to detect faults, consistency is examined through a likelihood ratio between the main and auxiliary particle filters (PFs). Specifically, the main PF which includes all the measurements and the auxiliary PFs which only do partial measurements are used in the process of consistency testing. Through GPS measurement and the application of the autonomous integrity monitoring system, the current study illustrates the performance of the proposed fault detection algorithm.

• Journal of Korea Multimedia Society
• /
• v.18 no.11
• /
• pp.1342-1350
• /
• 2015

Due to rapid development of mobile device technologies, the mobile banking through Internet has become a major service of banking information systems as a security-critical information systems. Recently, lots of mobile banking information systems which handle personal and transaction information have been exposed to security threats in vulnerable security control and management processes, mainly software systems. Therefore, in this paper, we propose a process model for software security improvements in mobile banking information system by application of fault tree analysis(FTA) and failure modes and effects analysis(FMEA) on the most important activities such as 'user authentication' and 'access control' and 'virus detection and control' processes which security control and management of mobile banking information systems are very weak.

• Journal of information and communication convergence engineering
• /
• v.9 no.5
• /
• pp.615-618
• /
• 2011

Living cells generate the cell cycle or apoptosis, depending on the course will be repeated. If an error occurs during this period of life in order to maintain the cells in the peripheral cells find the error portion. These cellular functions were applied to the system to simulate the circuit. Circuit implementation of the present study was constructed the redundant structure in order to found the error quickly. Self-repairing of digital systems as an advanced form of fault-tolerance has been increasingly receiving attention according as digital systems have been more and more complex and speed-up especially for urgent systems or those working on extreme environments such as deep sea and outer space. Simulating the process of cell differentiation algorithm was confirmed by the FPGA on the counter circuit. If an error occurs on the circuit where the error was quickly locate and repair. In this paper, we propose a novel self-repair architecture for fast and robust fault-recovery that can easily apply to real, complex digital systems. These Self-Repairing Algorithms make it possible for the application digital systems to be alive even though in very noisy and extreme environments.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.2
• /
• pp.294-299
• /
• 2002

This paper presents a faults diagnosis technique of induction motors based on a neural network. Only stator current is measured, transformed by using FFT and normalized for the training. Healthy, bearing fault, stator fault and rotor end-ring fault motors are prepared to obtain the learning data and diagnose the several faults. For more effective diagnosis, the load rate is changed by 100%, 60%, 30% of full load and the obtained are applied to the teaming process. The experimental results show the proposed method is very detectable and applicable to the real diagnosis system.

• Journal of information and communication convergence engineering
• /
• v.10 no.3
• /
• pp.231-236
• /
• 2012

For real-time wireless sensor network applications, it is essential to provide different levels of quality of service (QoS) such as reliability, low latency, and fault-tolerant traffic control. To meet these requirements, an (m,k)-firm based real-time routing protocol has been proposed in our prior work, including a novel local transmission status indicator called local DBP (L_DBP). In this paper, a fault recovery scheme for (m,k)-firm real-time streams is proposed to improve the performance of our prior work, by contributing a delay-aware forwarding candidates selection algorithm for providing restricted redundancy of packets on multipath with bounded delay in case of transmission failure. Each node can utilize the evaluated stream DBP (G_DBP) and L_DBP values as well as the deadline information of packets to dynamically define the forwarding candidate set. Simulation results show that for real-time service, it is possible to achieve both reliability and timeliness in the fault recovery process, which consequently avoids dynamic failure and guarantees meeting the end-to-end QoS requirement.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.22 no.6
• /
• pp.824-831
• /
• 2019

For effective development in consideration of the maintainability of the weapon system, it is necessary to understand whether the maintainability design requirements are satisfied at the early phase of development. This requires the application of an early design phase maintainability prediction process to provide opportunities for improvement. By defining the ambiguity group definition, fault isolation level, fault isolation probability, and countermeasures for faults, it was possible to predict early phase development. The MTTR of the initial design phase applying Procedure V to the artillery system was 3.46H, which is about 16 % higher than 2.98H, the MTTR using Procedure II. This is a result of system design ambiguity that has not been specified in the early phase of development.

• Journal of Korea Multimedia Society
• /
• v.24 no.8
• /
• pp.1101-1113
• /
• 2021

The rapid growth of sense-and-respond applications and the emerging cloud computing model present a new challenge: providing publish/subscribe middleware as a scalable and elastic cloud service. The publish/subscribe interaction model is a promising solution for scalable data dissemination over wide-area networks. In addition, there have been some work on the publish/subscribe messaging paradigm that guarantees reliability and availability in the face of node and link failures. These publish/subscribe systems are commonly used in information-centric networks and edge-fog-cloud infrastructures for IoT. The IoT has an edge-fog cloud infrastructure to efficiently process massive amounts of sensing data collected from the surrounding environment. In this paper. we propose a quorum-based hierarchical fault-tolerant publish/subscribe systems (QHFPS) to enable reliable delivery of messages in the presence of link and node failures. The QHFPS efficiently distributes IoT messages to the publish/subscribe brokers in fog overlay layers on the basis of proposing extended stepped grid (xS-grid) quorum for providing tolerance when faced with node failures and network partitions. We evaluate the performance of QHFPS in three aspects: number of transmitted Pub/Sub messages, average subscription delay, and subscritpion delivery rate with an analytical model.