• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.1067-1071
• /
• 2004

In this paper, the characteristic of the regenerative pump is reviewed by the measurement and the analysis. The dominant noise sources are harmonic components of the rotating impeller frequency. The acoustic characteristics and the noise source position at the dump are identified. In order to reduce the high-level peak noise, the interior flow of the pump chamber is analyzed by CFD (Computational Fluid Dynamics). Acoustic pressure is calculated with Ffowscs Williams and Hawkings equation. As the result of the analysis new design of the pump chamber is recommended. The recommended pump is compared with original pump by evaluating the RMS value of a interior static pressure and the sound pressure level. The new pump chamber recommended by analysis results is proved by a process of the measurement. The overall SPL of a recommended pump is reduced about 3 dBA.

• 자원환경지질
• /
• 제33권2호
• /
• pp.91-100
• /
• 2000

It has been more than ten years since Dukun mine was abandoned. Tailings of waste deposits and slime dumps in the abandoned Dukum mine have been left to be deserted for fifty years. The results of fifty years of neglecting are nothing short of major environmental problems. Slime dumps have been exposed to air and water in the mine over ten years and then soil profile has been formed well. Soil in the upper layer (A horizon) is the light gray color due to the leaching of cations. Soil in the lower layer (A2 horizon, 0.2∼0.3m)is tinted with reddish brown and yellowish brown color due to the development of iron oxides and iron hydroxides. Soil in the lower part of B horizon of (1.0∼3.0m) with the growth of copper and zinc oxides exposes to the bluish green, light blue, and dark gray. Ranging from 3m to 8m in depth, 85 samples were taken from 22 sampling sites with 50m intervals located on the slime dump area with hand auger and trench (open cut). As tailings was distributed, heavy metal elements extracted by the process of surface water and ground water move and disperse in to the hydrosphere. Waste dumps were distributed in and around the mine and water draining from those dumps be a potential source of contamination. Soils, thus, can be dispersed into downslope and downstream through wind and water by clastic movement. These materials may be deposited in another horizon if the water is withdrawn, or if the materials are precipitated as a result of differences in pH, or other conditions in deeper horizons. These were primarily associated with acid mine drainage. The characteristics and rate of release of acid mine drainage are influenced by various chemical and biological reactions at the source of acid generations. Prolonged extration of heavy metal elements has a detrimental effect on the agricultural land and residental area. Twenty soil samples were collected from the agricultural land in the area (0∼30 cm). Seventeen samples were also taken from the sediment in the stream running alongside the dumps. The dispersion patterns of heavy metal elements are as follows: The content of As ranged 2∼6 ppm in a horizon, 20∼125 ppm in B horizon with large amount of clay mineral is concentrated and the content of Cd ranged 1∼2 ppm in A horizon, 4∼22 ppm in B horizon. Like Cd, the content of As, Cu, Zn, Pb in B horizon is higher than that in A horizon (approximately 5∼100 times). When soil formation proceeds in stages, it is necessary to investicate the B horizon with the concentration of heavy metal and preventive measures will have to established.

• 대한전자공학회논문지TC
• /
• 제49권7호
• /
• pp.71-79
• /
• 2012

컴퓨터 기술이 발전함에 따라 스마트폰, 태블릿 PC 등의 보급이 확산되고 디지털 매체로의 접근이 용이해졌다. 컴퓨터의 하드웨어 성능이 향상되고, 하드웨어 형태의 변화가 발생하였지만 기본적으로 이루어지는 동작 매커니즘의 변화는 이루어지지 않았다. 일반적으로 컴퓨터의 프로그램이 동작하게 되면 프로그램에서 사용하는 데이터가 메모리에 상주하게 된다. 이러한 데이터는 운영체제 동작의 효율성 때문에 메모리에 남아있게 되나, 메모리 덤프나 실시간 메모리 분석을 통해 메모리 내의 데이터에 접근이 가능하다. 이 데이터를 악용할 경우 사용자의 개인정보나 암호화 키, 기밀 데이터 등이 유출될 수 있기 때문에 대응 방안이 마련되어야 한다. 본 논문에서는 가상 메모리의 주소를 이용해 해당 프로세스의 물리 메모리 주소를 찾아내고 해당 프로세스의 메모리 데이터 초기화를 이용하여 사용자의 데이터 유출을 최소화하는 방안을 제안한다.

• 한국환경복원기술학회지
• /
• 제13권5호
• /
• pp.38-50
• /
• 2010

Expressways are often upgraded by widening the lanes and/or by reshaping the roads to be more linear for faster travel time. However, during the process of improving the route of the expressways, the areas where the old expressways used to be are often unused and abandoned. When these neglected sites are left alone, they often become dump sites causing pollution and impacting the surrounding environment. Therefore, it is important to restore the abandoned expressway sites to its full natural beauty. In this study, the abandoned expressway at the Soksa interchange in Pyungchang county, located in Kangwon province was studied for establishing the model of ecological restoration project. Considering the characteristics of the site, the target flora species was chosen to be Quercus species and the target fauna species as amphibians. After the target species were carefully chosen, each species' habitat requirements were studied in order to figure out the appropriate methods toward habitat restoration specifically for these species. In addition, to determine the most efficient method toward restoration of abandoned expressways, the study utilized the planting hole techniques, the crack techniques, and the colonization techniques. In terms of the spatial organization, public education program is incorporated at the main entrance area and the programs for experimenting, and developing vegetation and habitat restoration techniques are placed in the vicinity. In the master plan-to provide natural ecosystem at the site-ASCON (asphalt concrete) was removed first, then plans for restoration including species' habitat restoration were established. Furthermore, the project included plans for improving water quality polluted through non-point source considering the surrounding nearby road and farm lands. Finally, the study established a planning process that will experimentally apply to the abandoned expressway restoration method. In the future, there will be a continuous monitoring of the methods applied to verify if the restoration methods are effective. Also, new restoration techniques should be available according to a variety of abandoned expressways' characteristics.

• 한국지반신소재학회논문집
• /
• 제19권4호
• /
• pp.33-40
• /
• 2020

최근 대규모 택지개발 현장에서 굴착공정 중 매립폐기물이 발견되는 사례가 빈번히 발생되고 있다. 발생된 매립폐기물을 환경적으로 처리하기 전에는 대상지역의 개발사업을 진행할 수 없으며, 매립폐기물에 대한 처리대책을 수립하여 환경적이고 경제적으로 처리하여야 한다. 본 연구에서는 매립폐기물의 처리에 있어 단가 산정의 기본적인 계수가 되는 매립폐기물의 겉보기밀도와 체적환산계수의 상관관계를 분석하고자 하였다. 이를 위하여 ◯◯지역의 사용종료 매립지 10지점에서 매립폐기물을 채취하여 물리적성상을 분석한 후, 성상별 및 혼합폐기물의 겉보기밀도를 측정하였다. 매립폐기물의 겉보기밀도와 체적 환산계수의 상관관계를 분석하기 위하여, 매립폐기물의 겉보기밀도로부터 유추한 체적환산계수와 실측한 체적환산계수, 경험식에 의한 체적환산계수를 비교하였다. 분석결과, 겉보기밀도로부터 유추한 체적환산계수, 경험식에 의한 체적환산계수, 그리고 실측한 체적환산계수는 일정한 상관관계를 나타내고 있어, 겉보기밀도와 체적환산계수에 관한 기초자료로서 활용할 수 있을 것으로 판단된다.

• KSBB Journal
• /
• 제14권1호
• /
• pp.124-130
• /
• 1999

아적장에서의 석탄의 탈황 가능성을 조사하기 위하여 Thiobacllus ferrooxidans를 이용한 탈황특성을 연구하였다. 배지의 배수를 고려할 때 야적장에서 미생물 탈황공정을 적용하기 위해서는 석탄입자 크기가 1mm 이상이어야 하고, 균일한 입자분포가 요구됨을 확인하였다. 1~2mm의 입자층과 2~4mm의 입자층에서의 약 70일 동안에 24%와 42%의 pyrite를 제거할 수 있었다. 두 석탄 입자층의 탈황속도는 각락 248mg S/kg coal.day (5,638mg S/kg pyritic-S.day)와 803mg S/kg coal.day(6,805mg S/kg pyritic-S,day)로 현탁배양의 약 15~25%로 낮았다. 석탄층에 액체배지를 순환하지 않고 단지 T.ferrooxidans의 접종만으로도 석탄의 표층부에서는 탈황이 가능하였다. 석탄을 야적장 등에 장기간 보관하는 동안에 고유황 석탄으로부터 미생물 탈황공정을 응용하여 부분적인 pyritic sulfur의 제거가 가능한 것을 알 수 있었다.

• 자원환경지질
• /
• 제32권2호
• /
• pp.177-187
• /
• 1999

Gravity, magnetic and VLF surveys were conducted to investigat the structural stability and hazards associated with the Ubong landfill in Pohang City, which has been built to dump industrial wastes. In 1994, the collapse of a bank happened in the 6th landfill site due to sudden heavy rain, and a large quantity of waste materials flowed out to the nearby landfill sites, factories and roads. We used $10{\times}10m$ resolution DEM data for gravity reductions. The maximum variation of the terrain effect in the survey area is about 0.5 mgal and the terrain effect is large in the vicinity of bank boundary. The Bouguer gravity anomaly map shows the effect due to the variatino of thickness and type of waste materials. The small negative gravity anomaly increases from the 9th site to the 6th site. The small negative gravity anomaly of the 9th site reflects the relatively shallow dumping depth of average 14.5 m in this site and increased density of waste materials by the repeated stabilization process of soil overlaying. The 6th site is located at the center of the former valley and rainfall and groundwater are expected to flow from south-east to north-west. Therefore, considering the previous accident of mixing waste and bank materials at the north-west boundary of the landfill, there may be some environmental problems of leakage of contaminated water and bank stability. The complex inversion technique using Simulated annealing and Marquardt-Levenberg methods was applied to calculate three-dimensional density distribution from gravity data. In the case of 6th site, it is apparent that the landfill had been dumped in four sectors. However, most part of the 9th site and showed that high magnetic industrial wastes were concentrated in the 6th site. The result of magnetic survey showing low magnetic anomalies along the boundaries of two sites is similar to that of gravity data. The VLF data also reveals four divided sectors in the 6th site, and overall anomaly trend indicates the directio of former valley.

• 전자공학회논문지
• /
• 제53권2호
• /
• pp.123-129
• /
• 2016

본 논문에서는 PCU(Power Control Unit)의 성능을 최적화 시킬 수 있는 동작모드를 제안하고 제작하여 그 결과를 보고 하였다. 특히 세 개의 기능별 모듈이 최적의 동작 상태를 유지할 수 있도록 버스의 전압과 연동되게 제어회로를 구성하여 동작 우선순위를 정하고 필요에 따라 자동적으로 동작하도록 최적 동작 제어 방식을 제안하였다. PCU는 태양광 전력을 부하와 연결된 버스에 정전압으로 변환시키는 S3R(Sequential Switching Shunt Regulator)과 보조 에너지 저장장치인 배터리에 잉여 전력을 저장하는 BCR(Battery Charge Regulator) 및 배터리에 충전되어 있던 전력을 부하에 공급하는 BDR(Battery Discharge Regulator)로 구성되어 있다. 세 개의 전력변환 모듈은 위성용 전원장치의 특성상 높은 신뢰성을 유지하기 위해서 각각의 모듈이 병렬로 동작하며, 특히 각 모듈의 기능이 최적의 상태를 유지하기 위해서 안정된 버스 전압이 상시 유지되어야 한다.

• 한국BIM학회 논문집
• /
• 제12권4호
• /
• pp.61-69
• /
• 2022

Earthmoving operations account for approximately 25% of construction cost, generally executed prior to the construction of buildings and structures with heavy equipment. For the successful completion of earthwork projects, it is crucial to constantly monitor earthwork equipment (e.g., trucks), estimate productivity, and optimize the construction process and equipment on a construction site. Traditional methods however require time-consuming and painstaking tasks for the manual observations of the ongoing field operations. This study proposed the use of a GPS sensor embedded in a smartphone for the tracking and visualization of equipment locations, which are in turn used for the estimation and simulation of cycle times and production rates of ongoing earthwork. This approach is implemented into a digital platform enabling real-time data collection and simulation, particularly in a 2D (e.g., maps) or 3D (e.g., point clouds) virtual environment where the spatial and temporal flows of trucks are visualized. In the case study, the digital platform is applied for an earthmoving operation at the site development work of commercial factories. The results demonstrate that the production rates of various equipment usage scenarios (e.g., the different numbers of trucks) can be estimated through simulation, and then, the optimal number of tucks for the equipment fleet can be determined, thus supporting the practical potential of real-time sensing and simulation for onsite equipment management.

• 대한토목학회논문집
• /
• 제40권1호
• /
• pp.87-95
• /
• 2020

4차 산업혁명 시대의 도래와 IoT 기술의 접목을 통하여 건설산업을 발전 시키기 위한 다양한 연구가 국내·외에서 진행되고 있다. 특히 다수다종의 건설장비가 투입되는 대단지 토공현장에서 건설장비의 관제 시스템은 생산성 증대를 위하여 매우 중요하다. 이러한 이유로 건설장비 최적운영 플릿관리 시스템이 개발되었고, 현장에서 적용과정 중에 문제점이 도출되어 단계별로 개선이 필요하게 되었다. 건설장비 최적운영 플릿관리시스템의 현장 적용과정을 검증하기 위해 실제 현장에 사용되었던 데이터와 본 시스템을 이용하여 생성된 현장자료를 입력하고 시뮬레이션을 통해 데이터를 비교하여 생산성 분석을 진행하였다. 분석은 굴삭기와 덤프에 국한하여 진행하였으며, 분석결과 시간당 작업율이 4 %대로 증가, 반면에 원가는 4 %로 감소되는 것으로 나타났다. 적용한 현장에 따라서 분석결과는 상이할 수 있지만, 토공현장 단지사업에서 장비의 작업량 증가와 원가 감소를 보여준 것은 생산성 증대를 검증한 것으로 사료된다.