• Journal of Sensor Science and Technology
• /
• v.22 no.3
• /
• pp.191-196
• /
• 2013

A particulate matter sensor fabricated by MEMS process is proposed. It is developed to accommodate Euro6 on-board diagnostics regulation for diesel automobile. In the regulation, emission of diesel particulate matter is restricted to 9 mg/km. Particulate matter sensor is designed to use induced charges by charged particulate matter. To increase sensitivity of the sensor, groove is formed on sensor surface because wider surface area generates more induced charges. Sensitivity of the sensor is measured 10.6 mV/(mg/km) and the sensor shows good linearity up to 15.7 mg/km. Also its minimum detectable range is about 0.25 mg/km. It is suitable to detect failure of a diesel particulate filter which should filter particulate matter more than 9 mg/km. For removing accumulated particulate matter on the sensor which can disturb normal operation, platinum heater is designed on the backside of the sensor. The developed sensor can sense very low amount of particulate matter from exhaust gas in real-time with good linearity.

• The Journal of the Society of Korean Medicine Diagnostics
• /
• v.18 no.3
• /
• pp.175-186
• /
• 2014

The purpose of this study is to give priority in Yin-deficient questionnaire items. if adequate priority is given, clinical judgment and questionnaire of the results is expected to be similar. The AHP is a systematic procedure for analyzing the elements of any problem hierarchically. Based on survey of expertise, as series of pairwise comparison judgements is performed to evaluate the various elements in the hierarchy. We are expected to use the AHP analysis that would apply to oriental doctor's diagnostic process analysis. In this study, korean medical doctors experienced over 5 years was included. Results given the importance to Yin-deficient questionnaire items, Results given the importance to the questionnaire items, the most important item was Irritable fever on the five Hearts, the second was tidal fever.

• The Journal of the Society of Korean Medicine Diagnostics
• /
• v.14 no.2
• /
• pp.75-84
• /
• 2010

Objectives: The objective of the current study is to determine whether an ultrasound device system is adequate for measuring distance from Sangwan (CV13) to pancreas. Methods: We recruited 3 healthy young male subjects and 2 sonographers. The each sonographer measured vertical shortest distance from CV13 to pancreas with a ultrasound device three times in random order. Because the total variation could be divided into repeatability, reproducibility and subject-to-subject variation in Gage R&R method, we compared the sources of variation associated with the measurement system with an analysis of variance model. Results & Conclusions: Number of distinct categories is calculated on the basis of standard deviation of subject-to-subject divided by standard deviation of total Gage R&R. If the number of categories is five or more, the measurement system may be acceptable for the analysis of the process. The number of distinct categories of the ultrasound device system for measuring distance from CV13 to pancreas was 6.29. So we concluded that repeatability and reproducibility of the ultrasound device system for measuring distance from CV13 to pancreas was acceptable.

• The Journal of the Society of Korean Medicine Diagnostics
• /
• v.14 no.2
• /
• pp.25-42
• /
• 2010

Background and purpose: The chronic diseases caused by lifestyle are on the increase. This study aims to review the eating habits as etiological factors and related symptoms from the perspective of Korean medicine. In this process, we will make a proposal on the treatment of the lifestyle related diseases. Methods: We studied the sentences about the eating habits and related diseases in Donguibogam Results and Conclusions: 1. The eating habits as etiological factors are overeating, irregular eating, late-night foods, fatty & heavy foods, cold foods, alcohols, etc. 2. The diseases caused by the eating habits are not limited to the gastrointestinal diseases(stomachache, vomiting, diarrhea, etc) but include the non-gastrointestinal diseases(edema, arthralgia, anal diseases, eye diseases, ear diseases, diabetes, cancers, etc.) 3. In the treatment of the diseases caused by the eating habits, the special regard should be paid to the etiological factors.

• Korean Journal of Pharmacognosy
• /
• v.52 no.3
• /
• pp.127-133
• /
• 2021

Platelet activation plays a major role in cardiovascular disorders (CVDs). Thus, disrupting platelet activation represents an attractive therapeutic target on CVDs. Esculetin, a bioactive 6,7-dihydroxy derivative of coumarin, possesses pharmacological activities against obesity, diabetes, renal failure, and CVDs. In other report, the effect of esculetin has been examined in human platelet activation and experimental mouse models, and esculetin inhibited collagen- and arachidonic acid-induced platelet aggregation in washed human platelets. However, it had no effects on other agonists such as thrombin and U46619, and its mechanism is not also clearly known. This study investigated the effect of esculetin on collagen-induced human platelet aggregation, and we clarified the mechanism. Esuletin has effects on the down regulation of PI3K/Akt and MAPK, phosphoproteins that act in the signaling process in platelet aggregation. The effects of esculetin reduced of TXA₂ production and phospholipase A₂ activation, and intracellular granule secretion including ATP and serotonin, leading to inhibit platelet aggregation. These results clearly clarified the effect of esculetin in inhibiting platelet activity and thrombus formation in humans.

• The Journal of the Society of Korean Medicine Diagnostics
• /
• v.11 no.1
• /
• pp.25-47
• /
• 2007

Background and Purpose: There was seldom study about method that diagnose 8 Constitution beside method of pulse diagnosis in 8 Constitution Medicine. Objectives: This study is to make out check list for 8 Constitution Medicine Diagnosis Expert System Development used CBR(Case based Reasoning). Methods: Review of literatures about special quality element of 8 Constitution and supplement learning advice of 8 Constitution Medicine Experts constructed knowledge base. And then, knowledge base divided through AHP(Analytic Hierarchy Process), and made out check list with this. Results: Knowledge base based on special quality element of 8 Constitution was divided by 5 greate classification and 25 bisection kind, and check list consisted of 251 item was made out through this. Conclusion: Based on this research, cases necessary to make 8 Constitution Medicine Diagnosis Expert System can be gathered through check list, and further study for 8 Constitution Medicine Diagnosis Expert System Development used CBR(Case based Reasoning) is needed to supplement this research.

• Design & Manufacturing
• /
• v.11 no.3
• /
• pp.35-40
• /
• 2017

PCR(Polymerase chain reaction) is a technique to replicate and amplify a desired part of DNA. It is used in various aspects such as DNA fingerprint analysis and rare DNA amplification of an extinct animal. Especially in the medical diagnosis field, it provides various measurement methods at the molecular level such as genetic diagnosis, and is a basic tool for molecular diagnostics. The internal shape of the plastic vial tube for PCR analysis used in the DNA detection process, and the surface roughness and internal cleanliness can affect detection and discrimination results. The plastic vial tube demanded by the developer of the PCR analysis equipment should be changed to a structure that eliminates the residual washing solution in the washing process to ensure the internal cleanliness. Thus the internal structure and the internal surface design for improving the PCR amplification efficiency are key issues to develop the plastic vial tube for the DNA detection process.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.126-126
• /
• 2009

Noninvasive plasma diagnostic technique is introduced to analyze and characterize HICP (Helmholtz Inductively Coupled Plasma) source during the plasma etching process. The HICP reactor generates plasma mainly through RF source power at 13.56MHz RF power and RF bias power of 12.56MHz is applied to the cathode to independently control ion density and ion energy. For noninvasive sensors, the RF sensor and the OES (Optical emission spectroscopy) were employed since it is possible to obtain both physical and chemical properties of the reactor with plasma etching. The plasma impedance and optical spectra were observed while altering process parameters such as pressure, gas flow, source and bias power during the poly silicon etching process. In this experiment, we have found that data measured from these noninvasive sensors can be correlated to etch results. In this paper, we discuss the relationship between process parameters and the measurement data from RF sensor and OES such as plasma impedance and optical spectra and using these relationships to analyze and characterize H-ICP source.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.19 no.3
• /
• pp.586-589
• /
• 2005

To study on the assignment of the eight trigrams (八卦) for the process on intake, digestion, excretion of food. Being based BEOK-HEE's diagram of eight trigrams order(伏羲次序圖), provisional namely six entera are assigned eight trigrams(八卦). Eight trigrams(八卦) are attached to the air(GEON 乾), the month(TAE 兌), the stomach(LEE 離), the small intestine(JIN 震),the large intestine(SON 巽), the rectum(GAM 坎), the anus(GAN 艮), the excrements(GON 坤). The BEOK-HEE's diagram of eight trigrams order(伏羲次序圖) means immutable order naturally. The process of six entera's digestion is also unchangeable in region and program. Therefore we can set up the process of six entera's digestion as the category of observation on the basis of BEOK-HEE's diagram of eight trigrams order(伏羲次序圖), and then we can arrange eight trigrams(八卦) on the process of six entera's digestion.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.11
• /
• pp.93-101
• /
• 1997

Ever since the nonlinearity of machine tool dynamics was established, researchers attempted to make use of this fact to devise better monitoring, diagnostics and control system, which were hitherto based on linear models. Theory of chaos which explains many nonlinear phenomena comes handy for furthering the analysis using nonlinear model. In this study, measuring system will be constructed using multi-sensor (Tool Dynamometer, Acoustic Emission) in end milling process. Then, it will be verified that cutting force is low-dimensional chaos by calculating Lyapunov exponents. Fractal dimension, embedding dimension. And it will be investigated that the relation between characteristic parameter calculated from sensor signal and tool wear.