• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.8
• /
• pp.1466-1470
• /
• 2007

MEMS design flow based on DFM concept is presented and applied to gyroscope design as a test case. It is purposed to contribute to the yield improvement by considering the process-related parameters from the design phase. After defining the performance requirements, the sensitivity analysis should be done on the draft design(s) to find out the key parameters related with the device performance. By doing so, TEG can be designed for the selected process and/or material parameters. Through a set of test runs, the process capability is characterized and the material properties are extracted using the TEG. Then we can estimate the virtual yield of the current process for the designed device by running Monte Carlo analysis where the process and/or material property variations are considered. The estimated yield will make us redesign the device to be more robust or improve the current process to have the smaller variations.

• Journal of Korean Society for Quality Management
• /
• v.45 no.4
• /
• pp.677-696
• /
• 2017

Purpose: This study suggests that Six Sigma MBB should be used as a key talent to lead the fourth industrial revolution era by training them with big data processing capability. Methods: Through the analysis between articles on the fourth industrial revolution and Six Sigma related papers, common competencies of data scientists and Six Sigma MBBs were identified and the big data analysis capabilities needed for Six Sigma MBB were derived. Then, training was conducted to improve the big data analysis capabilities so that Six Sigma MBB is able to design algorithms required in the fourth industrial revolution era. Results: Six Sigma MBBs, equipped with the knowledge in field site improvement and basic statistics, were provided with 40 hours of big data analysis training and then were made to design a big data algorithm. Positive results were obtained after applying a AI algorithm which could forecast process defects in a field site. Conclusion: Six Sigma MBB equipped with big data capability will make the best talent for the fourth industrial revolution era. A Six Sigma MBB has an excellent capability for improving field sites. Utilizing the competencies of MBB can be a key to success in the fourth industrial revolution. We hope that the results of this study will be shared with many companies and many more improved case studies will arise in the future as a result of this study.

• Journal of Korean society of Dental Hygiene
• /
• v.16 no.3
• /
• pp.337-346
• /
• 2016

Objectives: This study aims to investigate and analyzed the priority of vocational core competency factors in dental hygienists in Gwangju. Methods: Expert survey was conducted and Analytic Hierarchy Process(AHP) was applied to evaluate the weighting factors. First, we established the vocational core competency defined in NCS as AHP analysis model. The vocational core competency has 10 categories and 34 sub-categories. Secondly, AHP survey was conducted by 195 dental hygienists in Gwangju. Finally, the weights representing relative importance of each factor were calculated by using AHP method. Results: The AHP analysis on 10 categories showed that the weighting of interpersonal skills(0.165) was higher than any other categories while that of numeracy(0.035) was at the bottom, and the analysis on sub-categories revealed that the most important factors in each categories included the teamwork skills(interpersonal skills), problem-solving capability(problem-solving skills), listening skills(communication skills), ethical community(professional ethics), ability to understand business(ability to understand organizational structure), applicable technical skills(technical skills), self-management skills(self-development capability), information processing capabilities(information capacity), ability to manage time(resource management capabilities) and basic math skills(numeracy). Conclusions: The results in this study can be used as basic data for the development of liberal arts curriculum for dental hygiene education.

• Advances in Computational Design
• /
• v.4 no.1
• /
• pp.43-52
• /
• 2019

Variation Analysis (VA) is used to simulate final product variation, taking into consideration part manufacturing and assembly variations. In VA, all the manufacturing and assembly processes are defined at the product design stage. Process Capability Data Bases (PCDB) provide information about measured variation from previous products and processes and allow the designer to apply this to the new product. A new challenge to this traditional approach is posed by the Industry 4.0 (I4.0) revolution, where Smart Manufacturing (SM) is applied. The manufacturing intelligence and adaptability characteristics of SM make present PCDBs obsolete. Current tolerance analysis methods, which are made for discrete assembly products, are also challenged. This paper discusses the differences expected in future factories relevant to VA, and the approaches required to meet this challenge. Current processes are mapped using I4.0 philosophy and gaps are analysed for potential approaches for tolerance analysis tools. Matching points of simulation capability and I4.0 intents are identified as opportunities. Applying conditional variations, incorporating levels of adjustability, and the un-suitability of present Monte Carlo simulation due to changed mass production characteristics, are considered as major challenges. Opportunities including predicting residual stresses in the final product and linking them to product deterioration, calculating non-dimensional performances and extending simulations for process manufactured products, such as drugs, food products etc. are additional winning aspects for next generation VA tools.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.15 no.5
• /
• pp.18-24
• /
• 2016

An electromagnetic linear actuator is controlled precisely and securely and is useful in devices that require linear motion. The most commonly used method in the performance verification process for an electromagnetic actuator is finite element analysis that utilizes CAE. However, finite element analysis has the disadvantage that modeling and analysis consume a lot of time. Accordingly, lumped parameter analysis can be an alternative approach to the finite element method because of its computation iteration capability with fair accuracy. In this paper, the lumped parameter model and simulation results are presented. In addition, the results of the lumped parameter analysis are compared with those obtained from finite element analysis for verification.

• Bulletin of the Korean Chemical Society
• /
• v.21 no.1
• /
• pp.69-74
• /
• 2000

Applicability of Thermal field flow fractionation (ThFFF) was investigated for the analysis of masticated natural rubber (NR) adhesives produced bya hot melt mastication process. An optimum ThFFF condition for NR analysis was found by using tetrahydrofuran (THF) as a solvent/carrier and a field-programming. Low flowrate (0.3 mL/min) was used to avoid stopping the flow for the sample relaxation. Measured molecular weight distribution was used to monitor degradation of rubber during the mastication process. Rubber samples collected at three different stages of the mastication process and were analyzed by ThFFF. It was found that in an anaerobic process rubber degradation occurs at the resin-mixing (compounding) zone as well as in the initial break-down zone, while in an aerobic process most of degradation occurs at the initial breakdown zone. It was also found that E-beam radiation on NR causes a slight increase in the NR molecular weight due to the formation of a branched structure.

• The Journal of the Korea Contents Association
• /
• v.10 no.6
• /
• pp.188-196
• /
• 2010

This study aims at empiricallly designing method to increase player's play capability through determining of the relations of player's behavior pattern and emotion factors when having gameplay experiences in MMORPG. For modeling emotion factors on gameplay, Our preliminary studies are considered in the process of rule-based systems on cognitive science approach. These study estabilished game architecture process applied of player's cognitieve emotion reactions in specific situation of role playing games that have most noticeable interaction with players based on quest system. This approach is expected to extend instant responses, which can be controlled behind all of anti-main behavior pattern and main behavior pattern in game playing. Therefore, such study is meaningful that is proposed the analysis framework of player's emotion factors to design game playing capability in game interactions.

• International Area Studies Review
• /
• v.13 no.2
• /
• pp.371-392
• /
• 2009

The paper examines the determinants factor and business performance of global supply chain management. Precess innovation, information capability and partnership were used as proxy for the characteristics of determinants factor of global supply chain management. Agility of business performance was used as proxy for the business performance of global supply chain management. Overseas expansion were used as proxy for the intermediate factor. Based on the analysis of seventy two global supply chain management cases, the following results are found. Firstly, it was found that the process innovation, information capability and partnership of determinants factor affects agility of improved business performance. Secondly, process innovation, information capability and partnership of determinants factor improved more agility as overseas expansion. However, there are several limitations such as characteristics of process innovation, information capability and partnership, etc.

• Korean Management Science Review
• /
• v.29 no.2
• /
• pp.35-52
• /
• 2012

Although many prior studies have investigated the relationship between supply chain and new product development (NPD), the causal relationship between them has not been clearly established. Therefore, this study investigated systematically over the entire process of supply chain management (SCM) from trust to NPD capability, including not only the associations between trust, commitment, collaboration, supply chain quality, and NPD capability, but also the impact of organizational culture in the context of supply chain. In particular, this study examined the mediating effect of commitment on the relationship between trust and collaboration of channel members. In addition, it studies the moderating effect of organizational culture on the relationship between collaboration, supply chain quality, and NPD capability. Using a questionnaire survey, 112 usable responses are obtained. PLS (partial least square) is employed to assess the relationships among related constructs. The results of the data analysis show that (1) commitment mediates the link between trust and collaboration (2) supply chain quality is positively associated with NPD capability, and (3) organizational culture significantly moderates the association between collaboration and supply chain quality, yet it does not the relationship SC quality and NPD capability. Finally, the implications of the results are discussed, and directions for future research are suggested.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.17 no.4
• /
• pp.173-191
• /
• 2022

The global economic crisis, the trend of an aging society, and the rapid digital transformation are huge burdens and crises for our society. Due to these environmental changes and the economic recession, entrepreneurship and re-employment issues after retirement have emerged as social issues. This study was conducted to empirically analyze what factors affect seniors when they may start a business. In particular, as the fourth industrial revolution progresses, the focus was on the capability to utilize information and communication technology (ICT) and digital media that cannot be avoided. For empirical analysis, an online survey of seniors was conducted and 287 valid samples were analyzed. SPSS 24.0 and Macro Process 4.0 were used for statistical analysis. As a result of the empirical analysis of this study, self-efficacy and personal innovation for information technology acceptance(ICT), and communication capability using digital media had a significantly positive (+) effect on senior's entrepreneurial intention. However, the perceived usefulness of information technology and the capability to utilize digital media devices were not tested for significance. Among the variables that had a significant effect, personal innovation was found to have the greatest effect. Opportunity recognition was found to play a mediating role between self-efficacy, personal innovation, communication capabilities, and senior's entrepreneurial intention. The results of this study are of academic and practical significance in that digital media utilization capability is also an influential factor among various factors influencing the entrepreneurial intention of seniors.