• Journal of Electrical Engineering and Technology
• /
• 제8권1호
• /
• pp.1-10
• /
• 2013

The power industry is currently facing many challenges, due to the new environment created by the introduction of smart grid technologies. In particular, the large-scale deployment of electric vehicles (EVs) may have a significant impact on demand for electricity and, thereby, influence generation and transmission system planning. However, it is difficult to deal with uncertainties in EV charging loads using deterministic planning methods. This paper presents a two-stage stochastic decomposition method with Latin-hyper rectangle sampling (LHRS) to solve the integrated generation and transmission planning problem incorporating EV deployment. The probabilistic distribution of EV charging loads is estimated by Latin-hyper rectangle sampling (LHRS) to enhance the computational performance of the proposed method. Numerical results are presented to show the effectiveness of the proposed method.

• 한국항행학회논문지
• /
• 제14권5호
• /
• pp.618-624
• /
• 2010

본 논문에서는 다중물체를 추적하기 위해서 적합한 것으로 알려진 condensation 알고리즘의 자동 코드 발생기를 연구한 결과를 보인 것이다. 일반적으로 condensation 알고리즘은 일반인이 구현하기 매우 어려워 실제 유비쿼터스 상황인지를 위하여 필요한 기술임에도 불구하고 널리 이용되지 못하고 있다. 본 논문에서는 이 같은 문제점을 개선하기 위하여 시스템 다이나믹스 모델과 측정 모델이 주어지면 요구하는 성능을 만족하는 condensation algorithm이 내장된 필터를 자동으로 만들어주는 MATLAB 코드를 발생하도록 설계하였다. 일단 발생된 MATLAB 코드는 C, C++ 언어 등으로 변환되므로 원하는 소스를 얻을 수 있다.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제3B권2호
• /
• pp.103-110
• /
• 2003

With significant development of power electronics technology, the proliferation of nonlinear loads such as static power converters has deteriorated power quality in power transmission and distribution systems. Notably, voltage harmonics resulting from current harmonics produced by the nonlinear loads have become a serious problem in many countries. Many photovoltaic power generation systems installed in building systems have harmonics that are the worst object for distribution systems as a utility interactive system, and it tends to spread out continuously. Proposed and implemented in this paper is a multi-function inverter control strategy that allows a shunt active filter function to the power inverter of the photovoltaic power generation system established on a building system. The effectiveness of the proposed system is demonstrated through the simulation of a hypothetical power system using PSCAD/EMTDC.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.277-280
• /
• 2002

With significant development of power electronics technology, the proliferation of nonlinear loads such as static power converters has deteriorated power quality in power transmission and distribution systems. Notably, voltage harmonics resulting from current harmonics produced by the nonlinear loads have become a serious problem in many countries. There are already a lot of PV power generation systems installed in building systems whose harmonics are the worst object for distribution systems as a utility interactive system and also it tends to spread out continuously. In this paper, the authors propose a multy-function inverter control strategy which puts a shunt active filter function to the power inverter of the PV power generation system established on a building system. The effectiveness of the proposed system is demonstrated through the simulation of hypothetical power system using PSCAD/EMTDC.

• 한국자동차공학회논문집
• /
• 제12권5호
• /
• pp.73-78
• /
• 2004

The liquid phase LPG injection (LPLi) system (the third generation technology) has been considered as one of the next generation fuel supply systems for LPG vehicles, since it has a very strong potential to accomplish the higher power, higher efficiency, and lower emission characteristics than the mixer type(the second generation technology) fuel supply system. To investigate the durability property of core part of injector in liquid phase LPG injection system, leakage test, SEM test of injectors and analysis of unvaporized fuel components with various LPG fuel qualities were tested. The experimental results showed that no serious problem in durability test using favorable LPG fuel quality, while high leakage amount due to the large scratches in the needle and nozzle of the injector were found using LPG fuel with highly containing olefin components, especially butadiene species.

• Journal of Communications and Networks
• /
• 제9권4호
• /
• pp.438-445
• /
• 2007

In this paper, we consider the problem of optimum selection of quality-of-service(QoS) classes in interworking between the networks in a next-generation-network(NGN) environment. After introducing the delay-cost and loss-cost characteristics, we discuss the time-invariant(TI) and time-variant(TV) scenarios. For the TI case, we show that under nearly lossless transmission condition, each network can make its own optimization regardless of other networks. For the TV case, we present sufficient conditions under which the optimum QoS class of each network can be considered fixed with respect to time without considerable degradation in the optimization target. Therefore, under the conditions presented in this paper, the QoS of a flow in each network can be determined solely by considering the characteristics of that network and this QoS class can be held fixed during the flow period.

• Nuclear Engineering and Technology
• /
• 제37권2호
• /
• pp.127-138
• /
• 2005

Approaches to several recent issues in the operation of nuclear power plants using computational intelligence are discussed. These issues include 1) noise analysis techniques, 2) on-line monitoring and sensor validation, 3) regularization of ill-posed surveillance and diagnostic measurements, 4) transient identification, 5) artificial intelligence-based core monitoring and diagnostic system, 6) continuous efficiency improvement of nuclear power plants, and 7) autonomous anticipatory control and intelligent-agents. Several changes to the focus of Computational Intelligence in Nuclear Engineering have occurred in the past few years. With earlier activities focusing on the development of condition monitoring and diagnostic techniques for current nuclear power plants, recent activities have focused on the implementation of those methods and the development of methods for next generation plants and space reactors. These advanced techniques are expected to become increasingly important as current generation nuclear power plants have their licenses extended to 60 years and next generation reactors are being designed to operate for extended fuel cycles (up to 25 years), with less operator oversight, and especially for nuclear plants operating in severe environments such as space or ice-bound locations.

• Fibers and Polymers
• /
• 제4권3호
• /
• pp.119-123
• /
• 2003

Fluff (lint, fiber fly) generation, especially related to yarn structure, was investigated. Research centered on the fiber length related to fluff generation during the knitting process. Short fiber length composing yarn structure was a main source of the fluff shedding. High quality spun yarn with longer length of fiber was recommended to the high speed knitting industry in order to reduce process troubles such as yarn breakage, etc. but the cost is doubtable to the manufacturers. A trial to reduce the fluff trouble by using chemicals to hold the short fiber on the surface of the yam was suggested and the research showed a positive effect to the problem. However, another factors including a by-product of chemical residue and searching more feasible material need to be concerned for the future research.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 추계 학술논문 발표대회
• /
• pp.146-147
• /
• 2014

The environmental pollution problem the globally related to global warming arises, the demand for the solar power generation increases. But is generated sludge about 2tons in order to produce 1ton in the solar power generation used main material polysilicon. In this way, the arising sludge there is not method recycling and it is all discarded. Therefore, in this research, cement is not used dynamic properties tries to be analyze inorganic binder based on blast furnace slag and polysilicon sludge ratio. The appropriate replacement ratio of the experimental result polysilicon sludge was to be 8%.

• 한국초등과학교육학회지:초등과학교육
• /
• 제28권2호
• /
• pp.93-104
• /
• 2009

The purpose of this study was to explore the relationship between pre-service elementary teacher's prior knowledge and processes of observations and hypotheses generation via analysis of descriptive fault patterns during observation, problem generation and hypotheses generation processes. For the purpose of this study, thirty-four undergraduate students were participated and descriptions of participants' responds were analyzed. As the result, four patterns of descriptive fault on the process of generating hypothesis were classified; 1) descriptive fault from the causalities, 2) descriptive fault from repetition of observational facts, 3) descriptive fault from the priority of prior knowledge, and 4) descriptive fault from negation of the observational facts. From the result, the researcher was able to explore the faults caused by pre-service elementary students' prior knowledge through the observational descriptive analysis with hypothetical descriptive analysis.