• Journal of Korean Society for Quality Management
• /
• v.46 no.4
• /
• pp.843-862
• /
• 2018

Purpose: The purpose of this study was to develop quality innovation techniques specialized for the small and medium-sized businesses. which account for the majority of Korean companies, were having a hard time utilizing the widely recognized quality innovation techniques due to resource constraints. Methods: First, we do review the existing Single PPM and 6 Sigma. And investigate the utilization of these methods including Toyota Production System. Second, we devised a four-step problem-solving methodology based on recent trends in quality innovation such as Simple, Speedy, and Smart. Third, we do survey on frequently used tools for quality innovation. Many opinion leaders including quality consultants and professors answered and gave us valuable comments about our selected quality tools. Finally, we do specify and map tools to each step of PASS. Results: In 2017, 167 companies participated in the quality innovation support business for small businesses according to the Korea Chamber of Commerce & Industry. We conducted performance checks on 167 companies that had completed the "PASS" projects. For the purpose of evaluating improvement performance, the survey was carried out using a structured questionnaire during the field visit of these companies mentioned above. For the reference, 165 out of 167 companies (98.8 % response rate) responded to the questionnaire and conducted performance analysis based on it. According to the survey, 97.6 percent of the respondents were very satisfied with their overall satisfaction with the quality innovation support projects for small and medium sized enterprises in 2017. Also, 93.3 % of the respondents were satisfied with the results of level of the target achievement. As a result, 160 companies (97.0 % of the participating companies) hope to partic ipate in the quality improvement project using "PASS" once again. Conclusion: In this paper, we introduce the new quality innovation methodology, which is named as 'PASS', It could support the long-range business plan of the small and medium-sized businesses to achieve total customer satisfaction resulting in increased market share and improved profit margin. The most small companies can use this "PASS" technique more easily, quickly and most efficiently than their existing known quality innovation techniques such as Six Sigma and Single PPM, etc.

• Database Research
• /
• v.34 no.3
• /
• pp.148-158
• /
• 2018

The optical character recognition (OCR) is a technique to extract and recognize texts from images. It is an important preprocessing step in data analysis since most actual text information is embedded in images. Many OCR engines have high recognition accuracy for images where texts are clearly separable from background, such as white background and black lettering. However, they have low recognition accuracy for images where texts are not easily separable from complex background. To improve this low accuracy problem with complex images, it is necessary to transform the input image to make texts more noticeable. In this paper, we propose a method to segment an input image into text lines to enable OCR engines to recognize each line more efficiently, and to determine the final output by comparing the recognition rates of CLAHE module and Two-step module which distinguish texts from background regions based on image processing techniques. Through thorough experiments comparing with well-known OCR engines, Tesseract and Abbyy, we show that our proposed method have the best recognition accuracy with complex background images.

• Journal of Korean Home Economics Education Association
• /
• v.33 no.3
• /
• pp.173-187
• /
• 2021

The purpose of this research was to develop instructions for making upcycled clothing accessories related to the 'clothing management and recycling' unit of middle school home economics applying the design thinking technique. Teaching and learning process plans were developed according to the ADDIE model which includes the following process: analysis, design, development, implementation, and evaluation. The design thinking process includes understanding the related knowledge, sympathizing, problem identification(sharing perspectives) and idea development, making prototypes, testing, and making the actual product. Thirteen home economics teachers served as critics. Student feedbacks were collected to evaluate whether the course objectives were attained after the implementation. As a result, teaching and learning process plans, course materials, and evaluation rubrics for ten class sessions were developed. Student feedbacks confirmed the attainment of following five course objectives: improvement of ethical responsibilities through the exploration of various clothing recycling techniques, practice of creative and eco-friendly clothing culture, acquisition of the skills to use sewing tools safely, improvement of abilities to think, sympathize, and communicate, and exploration of aesthetic activities and fashion careers.

• Journal of Korean Society of Archives and Records Management
• /
• v.21 no.3
• /
• pp.187-215
• /
• 2021

Archives should provide a web-based archival information service with good usability based on the understanding of users' needs. Thus, this study analyzed the usability of the National Archives of Korea (NAK) website's search service through expert and usability evaluations for various users and suggested improvement plans. A literature review, heuristic evaluation, one of the usability expert evaluation methods, and usability evaluation for users were performed. As a result of expert evaluation, the severity rating for the usability problem was highest regarding a match between the system and real world and the lowest in error prevention. In the usability evaluation, it was assumed that the user's background and whether the website's help was provided is associated with usability. Usability evaluation was conducted for 22 participants, including those majoring in records management, web/application developers, and people without such backgrounds. Furthermore, a presurvey, a five-second test, and search tasks were conducted in a row. The analysis based on usability components in ISO 9241-11: 2018, i.e., effectiveness, efficiency, and satisfaction, showed that web/application developers had the highest search effectiveness, and those majoring in records management showed high effectiveness only in the search for archival content services. Background factors did not affect efficiency, and the more familiar with the finding aids, the better the efficiency. Moreover, providing the website's help was found to be positively associated with effectiveness and satisfaction. This study suggests that the NAK website will offer a user-friendly interface and search function, expand help support, and display a consistent web interface.

• Journal of Science Education
• /
• v.45 no.1
• /
• pp.1-10
• /
• 2021

In this study, we analyzed the relationship between the physical science domain of TIMSS 2019 and the Korean science curriculum. Twelve subjects are presented in the physical science domain of the TIMSS 2019 4th grade evaluation framework. Research group consisting of elementary and middle school teachers and science education experts, a total of 12, participated to analyze in which grade these subjects were included in the Korea 2009 revised and 2015 revised science curriculum. As a results of analyzing whether the achievement standards of the TIMSS 2019 evaluation framework and Korean science curriculum are consistent, the subjects pertinent to chemistry like 'chemical changes in everyday life,' 'heat transfer,' and 'electricity and simple electrical circuits' appeared not covered at all until the 4th grade curriculum in Korea. Given that the TIMSS 2019 evaluation framework is an international achievement standard, we are proposing to improve the Korean curriculum as follows: first, for the development of the next science curriculum, there is a need for science curriculum organized from the 1st grade of elementary school to connect the content and scope of chemistry in elementary, middle, and high schools as a whole including the Nuri curriculum. Second, as an alternative to the problem of suitability of learning volume and level of learning, it is possible to think of a method to readjust the grade of dealing with related concepts by lowering the difficulty or simplifying the concept. Third, it is necessary to discuss about introducing essential concepts and standard terms into Korea science curriculum according to international trends.

• Composites Research
• /
• v.34 no.2
• /
• pp.88-95
• /
• 2021

VARTM (Vacuum-assisted resin transfer molding) process is a low-cost process technology and affiliated with OoA (Out of Autoclave). Besides, it has been widely used in various fields. However, because of its lower quality than the autoclave process, it isn't easy to apply the VARTM process to the aerospace industry, which requires high reliability. The main problem of the VARTM process is the loss of mechanical properties due to the low fiber volume fraction and high void content in comparison to the autoclave. Therefore, many researchers have studied to reduce void and increase fiber volume fraction. This study examines whether the method of controlling atmospheric pressure could increase the fiber volume fraction and reduce void during the resin impregnation process. Reliability evaluation was confirmed by compressive strength test, fiber volume fraction analysis, and optical microscopy. As a result, it was confirmed that increasing the atmospheric pressure step by step in the VARTM process of impregnating the preform with resin effectively increases the fiber volume fraction and reduces void.

• KIPS Transactions on Software and Data Engineering
• /
• v.9 no.12
• /
• pp.403-410
• /
• 2020

In addition to the research on noise removal and super-resolution using the data restoration (Output result) function of Autoencoder, research on the performance improvement of clustering using the dimension reduction function of autoencoder are actively being conducted. The clustering function and data restoration function using Autoencoder have common points that both improve performance through the same learning. Based on these characteristics, this study conducted an experiment to see if the autoencoder model designed to have excellent data recovery performance is superior in clustering performance. Skip connection technique was used to design autoencoder with excellent data recovery performance. The output result performance and clustering performance of both autoencoder model with Skip connection and model without Skip connection were shown as graph and visual extract. The output result performance was increased, but the clustering performance was decreased. This result indicates that the neural network models such as autoencoders are not sure that each layer has learned the characteristics of the data well if the output result is good. Lastly, the performance degradation of clustering was compensated by using both latent code and skip connection. This study is a prior study to solve the Hanja Unicode problem by clustering.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.2
• /
• pp.789-793
• /
• 2021

A lithium secondary battery is the most promising candidate for future energy storage devices. On the other hand, the battery capacity decreases gradually due to the small amount of water and decomposition of the salts during the charging and discharging process, which deteriorates at high temperatures. Many researchers focused on increasing the cycling performance, but there have been few studies on the fundamental problem that removes water and HF molecules. In this study, silane molecules that are capable of absorbing water and HF molecules are introduced to the separator. Firstly, silica-coated amino-silane (APTES, 3-aminopropyltriethoxysilane) was synthesized, then the silica reacted with epoxy-silane, GPTMS ((3-glycidyloxypropyl)trimethoxysilane). A ceramic-coated separator was fabricated using the silane-coated silica, which is coated on porous polyethylene substrates. FT-IR spectroscopy and TEM analysis were performed to examine the chemical composition and the shape of the silane-coated silica. SEM was performed to confirm the ceramic layers. LMO half cells were fabricated to evaluate the cycling performance at 60 ℃. The cells equipped with a GPTMS-silica separator showed stable cycling performance, suggesting that it would be a solution for improving the cycling performance of the Li-ion batteries at high temperatures.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.1
• /
• pp.85-91
• /
• 2021

In contrast to standard train tracks, tramlines are often set along public roads, with trams running among pedestrians and other vehicles. In some cities and towns, trams and buses share the same routes and stations. Under the current investment appraisal system, trams are classified into light rail when predicting traffic demand and calculating benefits, but in the case of non-capital areas, it is notable that the origin-destination and transit lines of buses are not provided in the Korea Transport Database distribution data. Due to this problem, it is difficult to reflect proper mode changing behaviors between route buses and trams. This study examines the impact on tramlines of bus routes that are not currently considered in non-capital areas. Following an analysis of the effect of tram projects according to whether bus routes are considered or not, an improvement in methodology is proposed. Through this study, it is expected that the investment appraisal system for the planning of new tramlines will be improved in the future.

• Journal of the Korean Society of Radiology
• /
• v.14 no.7
• /
• pp.891-898
• /
• 2020

As the problem of shields made of lead has recently emerged, research on replacement shields is essential, and studies on the manufacture of diagnostic X-ray shields with 3D printers are also being actively conducted. Recently, with the development of metal mixed filaments, it has become possible to manufacture shielding materials easily, but studies on the nozzle size and output setting of 3D printers are insufficient. Therefore, this study aims to compare and analyze the results through a shielding rate experiment using a brass filament and a 3D printer, outputting the shield according to the nozzle size and layer height, and using a diagnostic radiation generator. The nozzle size was changed to 0.4, 0.8 mm, layer height 0.1, 0.2, 0.3, 0.4 mm, and output. The shielding rate test was fixed at 40 mAs, and the shielding rate was analyzed by experimenting with 60, 80, and 100 kVp, respectively. As a result of the analysis, it was analyzed that the printing time could be reduced to 1/10 according to the nozzle size and the layer height, and the shielding rate could be increased by 1% or more.