• Economic and Environmental Geology
• /
• v.50 no.2
• /
• pp.171-180
• /
• 2017

This study performed the analysis on the volcanic gases and hot spring waters from the Julong hot spring at Mt. Baekdu during the period from July 2015 to August 2016. Also, we confirmed the errors that $HCO_3{^-}$ concentrations of hot spring waters in the previous study (Lee et al. 2014) and tried to improve the problem. Dissolved $CO_2$ in hot spring waters was analyzed using gas chromatograph in Lee et al. (2014). Improving this, from 2015, we used TOC-IC to analysis dissolved $CO_2$. Also, we analyzed the $Na_2CO_3$ standard solutions of different concentrations using GC, and confirmed the correlation between the analytical concentrations and the real concentrations. However, because the analytical results of Julong hot spring water were in discord with the estimated values based on this correlation, we can't estimate the $HCO_3{^-}$ concentrations of 2014 samples. During the period of study, $CO_2/CH_4$ in volcanic gases are gradually decreased, and this can be interpreted in two different ways. The first interpretation is that the conditions inside the volcanic edifice are changing into more reduction conditions, and carbon in volcanic gases become more favorable to distribute into $CH_4$ or CO than $CO_2$. The second interpretation is that the interaction between volcanic gases and water becomes greater than past, and the concentrations of $CO_2$ which have much higher solubility in water decreased, relatively. In general, the effect of scrubbing of volcanic gas is strengthened during the quiet periods of volcanic activity rather than active periods. Meanwhile, the analysis of hot spring waters was done on the anion of acidic gases species, the major cation, and some trace elements (As, Cd, Re).

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.16 no.3
• /
• pp.202-210
• /
• 2013

As incomes increase, interest in ocean leisure picks up. As a result, a lot of research and developments on hull form design and production of planing boats, mostly used for ocean leisure, are needed. Analysis in researches on resistance of planing boats shows that resistance characteristic of planing boats is different from resistance characteristic of general boats because the former is fast, and its wetted surface is very small. Using Savitsky formula widely used in the calculation of effective horse power in shipbuildingyards, and propulsion system and engine manufacturers, this study calculated total resistance of a research planing boat. Then it analyzed the flow characteristics of the planing boat through theoretical analysis and wind tunnel experiment, and computed air resistance and lift force by changes of speed and trim angle. It also compared and analyzed result of theoretical analysis and experiment of the ratio of air resistance to total resistance under variations of velocity and trim angle. When the study is used to estimate more accurate effective horse power, it is expected to remedy abuses of unnecessarily installing high-powered engine. As nature disasters due to abnormal changes of weather increase, interest in greenhouse gas grows. International Maritime Organization (IMO) legislated Energy Efficiency Design Index (EEDI) and Energy Efficiency Operational Indicator (EEOI) to reduce ship greenhouse gas emissions. But this index will be applied to over 400 tons ships, small ships, emitting more greenhouse gases than larege ships per unit power, will dodge the regulations. Thus, this study indicated a problem by calculating greenhouse gas emissions of an ocean leisure planning boat (a small ship), and suggested the need for EEDI of small ships.

• The Journal of Korean Society for Radiation Therapy
• /
• v.22 no.1
• /
• pp.33-39
• /
• 2010

Purpose: It is very important to confirm conformance of dose distribution that is formed with treatment planning from IMRS or IMRT. It has been a problem dropped accuracy and conformance when the field size is getting smaller because of character of the 2D ion chamber. Verification of MatriXX Phantom dose distribution with a change in the SAD. Dose distribution measurement and analysis to improve the accuracy and should be useful to evaluate the award. Materials and Methods: A use of Novalis linear accelerator 6 MV photon beams. In general, IMRS were 25 patients with small field size. The selected patients were divided into three groups on the basis of the field size. SAD was changed from 80 to 130 cm and field size to determine the dose distribution to the change, each dose was measured using MatriXX Phantom. Analysis of measured values obtained from the program for each patient through the treatment planning system comparison and analysis of the dose distribution and gamma values were expressed. Result: SAD 80, 100, and 120 cm in size in the gamma value to the investigation of patients less than $3\;cm^2$ average 0.939, 0.969, and 0.979, respectively. Patients with more than $5\;cm^2$ 0.962, 0.983, and 0.988, respectively. $5\;cm^2$ or more patients 0.982, 0.990, and 0.992, respectively. Conclusion: The error rate of less than $3\;cm^2$ field size is increased rapidly. If the field size is increased, resolution is increased by 2D ion chambers. It has been approved that it can be credible if it is around $3\;cm^2$ when measuring dose distribution using MatriXX. Adjusting geometric field size by changing SAD is likely to be very useful when you measure dose distribution using MatriXX.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.23 no.2
• /
• pp.36-46
• /
• 2015

Integration of crop-livestock farming has been a problem-solving mode for abatement of environmental pollution and recovery of resources in recent years. The objectives of this study were 1) to suggest the customized integration of crop-livestock farming model reflecting the regional characteristics through in-depth analysis of case study and 2) to analyze the livestock nutrients flow in terms of three primary elements as nitrogen(N), phosphorous(P), and potassium(K). The personal interview and survey were carried out in 2012 for a total of 161 farms from four different regions(NS, NW, JJ, YC) in South Korea. The mass balance analysis was used to suggest and evaluate the models for two sites(JJ and YC). The results showed that NS and NW sites produced relatively more livestock manure than the sites of YC and JJ because of the regional differences in livestock numbers and urbanization. The models were suggested for the site JJ and site YC, and 'two track model(energy and resource recovery)' and 'dispersal type model' were assigned respectively. For the nutrient flows, the releasing P and K with new models had increased up to 7%, while N release had decreased down to 15% in both YC and JJ sites compared to the present treatment system. Estimated value showed that there was oversupply of N (719 ton/yr) and $P_2O_5$ (1,269 ton/yr) in YC and deficiency of N (671 ton/yr) and excessive $P_2O_5$ (32 ton/yr) in JJ respectively. Therefore, P runoff has to be considered an eutrophication occurs in rural small stream when an integration of crop-livestock farm system is applied into both sites.

• The Journal of Industrial Distribution & Business
• /
• v.2 no.2
• /
• pp.25-38
• /
• 2011

After the financial crisis, what has been the rapidly growth of large supermarkets, stores, and restaurants linked to concerns that have already reached saturation point, but the new opening large supermarkets is expected to continue into the future. The major supermarkets are continue to grow outward but growth slowed. And that is expected to continue differentiation of the product, acceptance the customer needs, acquiring high margin of sales products. Then the ongoing development of PB brand is to be positioned effective marketing strategy for overcoming the period of slow growth. In addition, big three local supermarkets continue to launch a clothing PB brand, expansion and operation strategy for the situation and based on this study and the success of the domestic large-Mart's PB and PB identifying problem and the need for differentiation and profit for the successful strategy is to discuss in this study. This research looks at the concept of major market's private brand, the strategy, the success example and the prospects, and views the globally rapid-growing private brands, not only having the limited role of distributing the products as retailers, but also having a control of the distribution channel as a manufacturing company. World's major advanced distribution companies, to differentiate their companies' products and increase the profitability, are putting a lot of efforts into private brand products, and there are many good examples that are globalizing, externally expanding, and creating high financial results. In this research, we presented three major domestic discount stores as examples to show that there is a need for a differentiated private brand management strategy in the saturated discount store industry in Korea. Also, we aim to provide a new product strategy for the future that has been saturated with discount stores to the limit, by providing suggestions that private brand products can be used as weapons with the strongest competiveness in the retail industry through pursuing store differentiations from thorough market analysis and product researches, meeting the customers' needs, and obtaining high margins. PB products, particularly clothing design, a thorough market analysis and product development trends and customer needs to reflect the acquisition of High margin differentiated powerful products and sustainable growth through the stores, large supermarkets, congested, a new breakthrough that can give a good opportunity to provide implications discount stores, new product strategy based on ways to limit proposed. This study discount the major three companies studied, the less strain is a generalization. In the future, domestic and local discount store brand PB, SPA brand that the multinational comparative analysis of the value of the PB expansion strategy centered on clothing, additional studies will be needed.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.33 no.1
• /
• pp.1-11
• /
• 2015

Gyeongju, Silla capital, hasn't paid much attention to a value of fortress as advanced frame of landscape all the while. All have done until now were maintaining lots of fortress including Gyeongju and setting night landscape lighting for them or building a trail in mountain fortress. Hereupon, this study tried to take a look at historical and scenic value of fortress, landscape frame of Gyeongju-Silla capital, based on Wolseong and Myeonghwalseong and find the way to contribute to it on landscape architectural level. As Wolseong(月城) and Myeonghwalseong(明活城) functioned as royal palace in Silla Dynasty, they need some research and study on fortress inside in detail rather than restoring them by simply maintaining the shapes. While Wolseong has overall excavation investigation going on, Myeonghwalseong representing mountain fortress area is losing its value due to unbefitting management to a title of world heritage. If conducting close research and study on these remains, it seems like it could contribute a lot to landscape architectural research of Silla royal palace through tracks, which will be used as royal palace. Here I suggest research direction on landscape architectural level about fortress remains in Gyeongju area as followings. Firstly, away from all research focusing on fortress shape, consecration way, etc, we need to conduct a research comprisable of inner space of fortress. As Wolseong and Myeonghwalseong functioned as royal palace in Silla Dynasty, it'll be possible to research about ponds, Nu-Jeong(樓亭), drainage facilities, oddly shaped stones, moundings, pavements, circulation systems, planting traces, etc. For this, we need to research and study through comparison with cases of China, Japan and Goguryeo of the same age. Secondly, applying garden archaeological way is possible to translate objectively regarding research of ancient garden with low literature record. But attainable achievement and information will be limited if implementing excavation based on archaeology as excavations so far regarding excavation investigation of Wolseong. The alternative to such problem is participation plan of landscaping field through the foundation of garden archaeology. We might be able to attain many results on landscape architectural level from research, if conducting research and study about Silla capital including Wolseong by applying garden archaeology such as collection of environmental sample and discovery and analysis of remains through aerial photograph, archaeological research, analysis of historical building, surface exploration, excavation technique, analysis of soil and flowerpot, etc. For this, many people majored in landscape architecture need to try and acquire archaeological knowledge. Also, we need to call attention to internal garden archaeology through international academic symposium by inviting global experts in garden archaeology field. I've suggested the study of location of Wolseong and Silla fortress in Gyeongju area, plan research on using and treating trees about the space in and out of fortress and landscape architectural research direction of Wolseong fortress.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.9
• /
• pp.1013-1019
• /
• 2007

Electronic wastes have increased tremendously. However, any reliable treatment methodologies have rarely been established. Electronic wastes have posed serious disposal problem due to their physico-chemical stability. This paper investigated the application possibility of pyrolysis for the purpose of recycling the p-CCL(phenol based Copper Clad Laminate). Thermogravimetric analysis(TGA) was used to investigate the thermal decomposition pattern of p-CCL. We elucidated the characteristics of pyrolysis by-products at operating temperatures of 280, 350 and $600^{\circ}C$. GC/MS and FT-IR were used to characterize the liquid by-products along with general characterization methods such as Ultimate Analysis, Proximate Analysis and Heating Value, whereas general characterization methods were only introduced for the solid by-products. At a heating rate of $5^{\circ}C$/min, TGA curves exhibited three decomposition stages: (1) low-temperature decomposition region$(<280^{\circ}C)$, (2) medium temperature region$(280\sim350^{\circ}C)$ and (3) high-temperature region$(>350^{\circ}C)$. The major compounds of liquid by-products at low- and medium-temperatures were accounted for by water and phenol, whereas branched phenols and furans were major compounds at high-temperatures. As the temperature increases, volatile quantities decreased but the fixed carbon increased. High heating values of solid by-products($7,400\sim7,600$ kcal/kg) would suggest that the solid by-products could be applicable as fuel. In addition, high fixed carbon but low ash content of the solid by-products offered an implication that they are capable of being upgradable for adsorbent after applying appropriate activating process.

• The Journal of Korean Academy of Prosthodontics
• /
• v.45 no.4
• /
• pp.506-521
• /
• 2007

Statement of problem: The cumulative success rate of wide implant is still controversial. Some previous reports have shown high success rate, and some other reports shown high failure rate. Purpose: The aim of this study was to analyze, and compare the biomechanics in wide implant system embeded in different width of crestal bone under different occlusal forces by finite element approach. Material and methods: Three-dimensional finite element models were created based on tracing of CT image of second premolar section of mandible with one implant embedded. One standard model (6mm-crestal bone width, 4.0mm implant diameter central position) was created. Varied crestal dimension(4, 6, 8 mm), different diameter of implants(3.3, 4.0, 5.5, 6.0mm), and buccal position implant models were generated. A 100-N vertical(L1) and 30 degree oblique load from lingual(L2) and buccal(L3) direction were applied to the occlusal surface of the crown. The analysis was performed for each load by means of the ANSYS V.9.0 program. Conclusion: 1. In all cases, maximum equivalent stress that applied $30^{\circ}$ oblique load around the alveolar bone crest was larger than that of the vertical load. Especially the equivalent stress that loaded obliquely in buccal side was larger. 2. In study of implant fixture diameter, stress around alveolar bone was decreased with the increase of implant diameter. In the vertical load, as the diameter of implant increased the equivalent stress decreased, but equivalent stress increased in case of the wide implant that have a little cortical bone in the buccal side. In the lateral oblique loading condition, the diameter of implant increased the equivalent stress decreased, but in the buccal oblique load, there was not significant difference between the 5.5mm and 6.0mm as the wide diameter implant. 3. In study of alveolar bone width, equivalent stress was decreased with the increase of alveolar bone width. In the vertical and oblique loading condition, the width of alveolar bone increased 6.0mm the equivalent stress decreased. But in the oblique loading condition, there was not a difference equivalent stress at more than 6.0mm of alveolar bone width. 4. In study of insertion position of implant fixture, even though the insertion position of implant fixture move there was not a difference equivalent stress, but in the case of little cortical bone in the buccal side, value of the equivalent stress was most unfavorable. 5. In all cases, it showed high stress around the top of fixture that contact cortical bone, but there was not a portion on the bottom of fixture that concentrate highly stress and play the role of stress dispersion. These results demonstrated that obtaining the more contact from the bucco-lingual cortical bone by installing wide diameter implant plays an important role in biomechanics.

• Journal of the Korean Academy of Child and Adolescent Psychiatry
• /
• v.17 no.1
• /
• pp.19-26
• /
• 2006

Objectives : The object of this study was to examine computer game playing patterns and psychopathologies related to computer game addiction in school-age children. Methods : The subjects were 533 elementary school students (4th to 6th grade) in Kangdonggu, Seoul. We evaluated computer playing patterns of all subjects using computer game playing pattern questionnaire, and determined the risk group of computer game addiction by internet game addiction scale score. We evaluated subscale score of K-CBCL from parents of all subjects, and conducted correlation analysis and logistic regression analysis between computer game addiction and subscale score of K-CBCL. Results : In 488 responders, 10.2% of started playing computer game in preschool age, and 67.2% started at low grade of elementary school. The mean frequency of computer game play per week was 3.66 days. Mean time spent playing computer games per day was 1.89 hours. 'Simply for fun' was the most common reason far playing computer games (40.8%). Male subjects showed statistically significant differences in age of starting computer game, frequency of computer game play per week, reasons for playing computer game and computer game addiction scale scores. There were significant correlations between computer game addiction scale scores and academic performance, somatic complaints, attention problems, and internalizing problems in K-CBCL. But In logistic regression analysis, only attention problems among K-CBCL subscales showed significant predictability to computer game addiction. Conclusion : Upper grade elementary school students experienced computer game playing at the very early age, and spend much time in playing computer games. There were significant correlation and predictability between computer game addiction and attention problems.

• Journal of The Korean Association For Science Education
• /
• v.38 no.4
• /
• pp.495-504
• /
• 2018

This study was conducted to develop items to measure scientific core competency based on statements of scientific core competencies presented in the 2015 revised national science curriculum and to identify the validity and reliability of the newly developed items. Based on the explanations of scientific reasoning, scientific inquiry ability, scientific problem-solving ability, scientific communication ability, participation/lifelong learning in science presented in the 2015 revised national science curriculum, 25 items were developed by five science education experts. To explore the validity and reliability of the developed items, data were collected from 11,348 students in elementary, middle, and high schools nationwide. The content validity, substantive validity, the internal structure validity, and generalization validity proposed by Messick (1995) were examined by various statistical tests. The results of the MNSQ analysis showed that there were no nonconformity in the 25 items. The confirmatory factor analysis using the structural equation modeling revealed that the five-factor model was a suitable model. The differential item functioning analyses by gender and school level revealed that the nonconformity DIF value was found in only two out of 175 cases. The results of the multivariate analysis of variance by gender and school level showed significant differences of test scores between schools and genders, and the interaction effect was also significant. The assessment items of science core competency based on the 2015 revised national science curriculum are valid from a psychometric point of view and can be used in the science education field.