• Journal of the Korea Convergence Society
• /
• v.5 no.3
• /
• pp.29-39
• /
• 2014

This study designed to know subjective structure about type of coping with stress of nursing students using Q-methodology. The statement positions on the sorting continuum were scored from +4(representing the highest level of agreement) through 0(at the neutral position on the continuum) through -4(representing the highest level of disagreement). Factor analysis of the data was undertaken using PC QUANL software to determine if any patterns were discernible. The four types extracted eigenvalues greater than 1.0 and explained approximately 52.14% of the variation in responses(31.73, 10.13, 5.73 and 4.65% respectively).: (1) Positive resolve type, (2) Ignore problem type, (3) Self resolution type and (4) Conversation type. The study results can be utilized in both an effective nursing education and clinical practice.

• Journal of the Korea Convergence Society
• /
• v.8 no.7
• /
• pp.199-205
• /
• 2017

Despite the economic downturn, the amount of clothing being discarded is increasing due to the fast fashion. The purpose of this study is to propose a fashion sharing service development to settle the rational consumption culture along with the abandoned clothes problem. Shared fashion rental service has attracted as a solution to environmental problems not only when clothes are incinerated but also in manufacturing process, but there is a lack of precedent research. Therefore, this study is meaningful in that it has developed two development plans based on the results of analysis of service case based on three factors by Rachel Botsman. First, active community development. Second, it is the creation of goods through activation of the shared economy. In this study, there are limitations that can't be proved through actual application, so more research is needed through empirical studies on actual users in the future.

• Journal of the Korea Convergence Society
• /
• v.9 no.2
• /
• pp.7-12
• /
• 2018

With our society entering the Fourth Industrial Revolution, there has been heightened interest in coding education, which has led to an increased number of coding classes offered in schools. Once catered to degree holders only, coding courses are now being offered as liberal arts courses to even non-majors. As the importance of computing abilities and creativity-oriented education through software learning becomes increasingly pronounced, the need for research on effective coding learning is growing more urgent. The present study sought an effective coding education model that would encourage and enhance learners' participation and interest in coding. The proposed learning model is designed to invoke learner's recognition of various coding grammars and data search in the process of designing and performing their own unique project. Application of the proposed learning model and analysis of such case studies showed improvement in learning outcomes. One can expect improved performance among learners if the proposed learning model is applied to various coding courses.

• Journal of Environmental Science International
• /
• v.19 no.6
• /
• pp.779-785
• /
• 2010

To solve a problem of water supply on urban areas, groundwater recharge has to be assessed not only for evaluating the possibility of groundwater development but also for identifying a sustainable aquifer system for water resource development. The assessment of groundwater recharge has been challenged since the land use has been changed constantly. In this study, the groundwater recharge and its ratio were assessed from 1961 to 2007 in Su-yeong-gu, Busan, South Korea by analyzing precipitation, land use, and soil characteristics. For land use analysis, the urbanization change was considered. The land use areas for the residential, agricultural, forest, pasture, bare soil, and water in 1975 occupy 18.6 %, 30.0%, 48.8%, 0.1%, 2.0%, and 0.5% of total area, respectively. The land use ratios were sharply changed from 1980 to 1985; the agricultural area was decreased to 18.3%, and the residential area was increased to 15.0%. From 1995 to 2000, the agricultural area was decreased to 5.5%, and the residential area was increased to 5.4%. The annual averages of precipitation, groundwater recharge, and its ratio were 1509.3 mm, 216.0 mm, and 14.3% respectively. The largest amount of the groundwater recharge showed in 1970 as 408.9 mm, comparing to 2138.1 mm of annual rainfall. Also, the greatest ratio of the groundwater recharge was 19.8% in 1984 with 1492.6 mm of annual rainfall. The lowest amount and ratio of the groundwater recharge were 71.9 mm and 8.0% in 1988, relative to 901.5 mm of annual precipitation. As a result, it is concluded that rainfall has increased, whereas groundwater recharge has decreased between 1961 and 2007.

• Journal of the Korean Data and Information Science Society
• /
• v.22 no.4
• /
• pp.765-773
• /
• 2011

Today, as the number of applicants for admission decreases, competition among universities is deepening in Korea. Especially, the existence of local universities has led to intense competition to increase the enrollment rate of new students and reduce dropout rate. To survive in this competition, local universities are making various efforts; however, the primary problem is improving their educational service quality. In this study, we have developed a device to measure educational service quality which can be applied to the field of higher education, and factors that determine educational service quality are dragged through this device. In addition, this research identifies which statistically significant factors play a part in overall satisfaction and word of mouth effect, and interprets 29 quality attributes using importance-satisfaction transformed index.

• Journal of Technologic Dentistry
• /
• v.39 no.1
• /
• pp.43-52
• /
• 2017

Purpose: Physical and chemical properties of gold is most suitable to be restored of teeth to its original state. Recently zirconia was used instead of gold because of esthetical and intimacy of human body. Because of high strength and high abrasion resistance of zirconia, all zirconia artificial tooth lead to wear the original tooth of opposite site. To preserve this original tooth, zirconia artificial tooth covered with dental ceramic glass was used. When joining the zirconia core and dental ceramic glass, difference of their thermal expansion coefficient and wetting ability is generated the residual stress at interface lead to crack. In order to solve this problem, intermediate layer what is called zir-liner was imported to decrease the residual stress and increase the bonding strength. Methods: In this study, to identify the optimum conditions for manufacturing process, various methods to rough the surface of zirconia core were adopted, and vary the thickness of interlayer, and analyzed bond strength. Results: Bond strength of sanding specimens group showed higher than that of non-sanding specimens group, and once applied intermediate layer with sanding specimens showed highest bond strength with 28 MPa. SEM photomicrographs of zirconia cores fired at $1500^{\circ}C$ showed parallel straight lines in sanding and pockmarked surface in blasting surfaces as abrasion traces. Observation of the destruction section after shear test by SEM were carried out. Liner applied non-sanding group and non-liner applied sanding group all showed interfacial crack. Sandblasting group with non-liner showed remained dental ceramic glass on the surface of zirconia. Sandblasting group with once applied liner showed partially remained liner and dental ceramic glass on the surface of zirconia. XRD analysis revealed that sandblasting group showed higher monoclinic peaks than other specimens group and this result was due to the high collision energy for stress induced phase transformation. Conclusions: A study on the improvement of bonding strength between zirconia and dental ceramic glass steadily carried out for the future to practical use.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.12
• /
• pp.1091-1099
• /
• 2015

UFMC(Universal-Filtered Multi-carrier) and FBMC(Filter Bank Multi-carrier) system are receiving attention as candidate waveforms for 5G mobile communication system. But, these systems have high PAPR(Peak to Average Power Ratio) problem because these systems use a number of subcarrier. In this paper, we propose DFT(Discrete Fourier Transform) spreading based DFT-s(spreading)-UFMC system and DFT-s-FBMC system in order to overcome the PAPR drawback. In order to evaluate PAPR performance of the proposed systems, we design and simulate OFDM(Orthogonal Frequency Division Multiplexing), UFMC, FBMC, DFT-s-OFDM, DFT-s-UFMC, DFT-s-FBMC system. As simulation results, each PAPR performance of DFT-s-OFDM system, DFT-s-UFMC system, and DFT-s-FBMC system rise by 2.7 dB, 2.8 dB, and 1.1 dB respectively by DFT spreading technique.

• The Journal of Korean Academy of Prosthodontics
• /
• v.40 no.6
• /
• pp.590-596
• /
• 2002

The resin : metal interface is at the basis of most bonding failures in resin-bonded prosthesis. Although debonding has been a problem with adhesive fixed partial dentures, various dentists classify them as long-term restorations. The advantages of resin-bonded fixed partial dentures include minimal tooth reduction and the possibility of rebonding. if resin-bonded protheses can be easily rebounded, it is of clinical importance to know if the lutingagents rebond as well the second time as they did originally. Several retentive systems for resin-to-metal bonding have recommended. Treatments such as electrolytic etching and silicone coating, despite the good result of bond strength, have proved to be time-consuming and technique-sensitive. Therefore a simple and more reliable method is desirable. This study evaluated the effect of metal surface treatments on the rebond strength of panavia 21 cement to a nickel-chromium(Ni-Cr) alloy. The samples were received the following surface treatments : Group No.1 (control or served as the control) treatment with sandblasting with 50um aluminum oxide and ultrasonically cleaned for 10minutes in double-deionized water, Group No.2 were no surface treatments. Group No.3 were treated with metal primer. Group No.4 were treated with sandblasting as previously described, and then metal priming. From the analysis of the results, the following conclusions were drawn. 1. Sandblasting and metal priming appears to be an effective method for treatment of metal after accidental debonding. 2. Group without surface treatment had significantly lower bond strengths compared with other groups. 3. The combination of sandblasting and metal priming may not develop superior bonding strengths compared with other techniques that used the Ni-Cr alloys. 4. Combination of cohesive and adhesive failures were the most common type observed. The results support the use of sandblasting as a viable procedure when rebonding accidentally lost adhesive partial denture. We concluded that sandblasting and metal priming of metal surface before bonding could provide the adequate bond strength during rebonding of resin-bonded fixed partial denture.

• The Journal of Advanced Prosthodontics
• /
• v.1 no.2
• /
• pp.75-84
• /
• 2009

STATEMENT OF PROBLEM. A number of studies about the nano-treated surfaces of implants have been conducting along with micro-treated surfaces of implants. PURPOSE. The purpose of this study was to get information for the clinical use of nano-treated surfaces compared with micro-treated surfaces by measuring removal torque and analyzing histological characteristics after the placement of various surface-treated implants on femurs of dogs. MATERIAL AND METHODS. Machined surface implants were used as a control group. 4 nano-treated surface implants and 3 micro-treated surface implants [resorbable blast media surface (RBM), sandblast and acid-etched surface (SAE), anodized RBM surface] were used as experimental groups. Removal torque values of implants were measured respectively and the histological analyses were conducted on both 4weeks and 8weeks after implant surgery. The surfaces of removed implants after measuring removal torque values were observed by scanning electron microscopy (SEM) at 8 weeks. RESULTS. 1. Removal torque values of the nano-treated groups were lower than those of micro-treated groups. 2. Removal torque values were similar in the anodized RBM surface groups. 3. On the histological views, there was much of bone formation at 8 weeks, but there was no difference between 4 and 8 weeks, and between the types of implant surfaces as well. CONCLUSION. it is suggested that implant topography is more effective in removal torque test than surface chemistry. To get better clinical result, further studies should be fulfilled on the combined effect of surface topography and chemistry for the implant surface treatments.

• The Journal of Advanced Prosthodontics
• /
• v.1 no.2
• /
• pp.91-96
• /
• 2009

STATEMENT OF PROBLEM. The aim of this study was to study the effects of various surface treatments to a titanium surface on the expression of Runx2 in vitro. MATERIAL AND METHODS. Human Osteosarcoma TE-85 cells were cultured on machined, sandblasted, or anodic oxidized cpTi discs. At various times of incubation, the cells were collected and then processed for the analysis of mRNA expression of Runx2 using reverse transcription-PCR. RESULTS. The expression pattern of Runx2 mRNA was differed according to the types of surface treatment. When the cells were cultured on the untreated control culture plates, the gene expression of Runx2 was not increased during the experiments. In the case of that the cells were cultured on the machined cpTI discs, the expression level was intermediate at the first day, but increased constitutively to day 5. In cells on sandblasted cpTi discs, the expression level was highest in the first day sample and the level was maintained to 5 days. In cells on anodized cpTi discs, the expression level increased rapidly to 3 days, but decreased slightly in the 5-th day sample. CONCLUSION. Different surface treatments may contribute to the regulation of osteoblast function by influencing the level of gene expression of key osteogenic factors.