• Journal of the Society of Naval Architects of Korea
• /
• v.33 no.1
• /
• pp.65-76
• /
• 1996

A screw propeller is usually accepted as a propulsor of many kinds of ships. However, for high speed vessels, screw propeller has large cavitation area on the blades so propeller efficiency is decreased and erosion can be happened. To avoid this problem, supercavitating propeller and waterjet are generally used for high speed vessels. In this paper, we introduced the self-propulsion test procedure which has been developed for high speed vessels in Hyundai Maritime Research Institute. The model ship used in experiment represents catamaran about 5.3 m in length. To minimize the experimental errors, two impellers were driven by a single motor. Thrust was calculated by converting the measured pressure to flow rates at the nozzle exit. The test procedure is composed of resistance test, self propulsion test and analysis. In order to measure the pressure, pressure tabs were installed around the nozzle exit and connected to the pressure sensor by vinyl tube.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.13 no.1
• /
• pp.1-9
• /
• 1976

Using the computer programs for calculation of natural vibrations of ship's hull developed by the authors et al., an investigation into influences of various parameters on the accuracy of calculation was done through example calculations of a 30,000 DWT petroleum products carrier M/S Sweet Brier built by Korea Shipbuilding and Engineering Corporation. The methodical principles employed for the computer program development are as follows; (a) the ship system is reduced to an equivalent discrete elements system conforming to Myklestad-Prohl model, (b) the problem formulation is of transfer matrix method, and (c) to obtain solutions an extended $G\ddot{u}mbel's$ initial value method is introduced. The scope of the investigation is influences of number of discrete elements, choice of significant system parameters such as rotary inertia, bending stiffness and shear stiffness, and simplification of distributions of added mass and stiffness as trapezoidal ones referred to those of midship section on the calculation accuracy. From the investigation the followings are found out; (1) To obtain good results for the modes up to the seven-noded thirty or more divisions of the hull is desirable. For fundamental mode fifteen divisions may give fairly good results. (2) The influence of rotary inertia is negligibly small at least for the modes up to the 5- or 6- noded. (3) In the case of assuming either bending modes or shear modes the calculation results in considerably higher frequencies as compared with those based on Timoshenko beam theory. However, the calculation base on the slender beam theory surprisingly gives frequencies within 10% error for fundamental modes. (4) It is proved that to simplify distributions of added mass and stiffness as trapezoidal ones referred to those of midship section is a promising approach for the prediction of natural frequencies at preliminary design stage; provided good accumulation of data from similar type ships, we may expect to obtain natural frequencies within 5% error.

• Journal of Korean Society of Archives and Records Management
• /
• v.18 no.2
• /
• pp.163-188
• /
• 2018

How do we create a next generation Records Management System? Under a rapidly changing system development environment, the records management system of public institutions has remained stable for the past 10 years. For this reason, it seems to be the key cause of the structural problem of the Records Management System, which makes it difficult to accommodate user requirements and apply a new recording technology. The purpose of this study is to present a redesigned model for a next-generation records management system by analyzing the status of the electronic records management. This study analyzed "A Study on the Redesign of the Next-Generation Electronic Records Management Process," records management technology of advanced records management system, and a case of an overseas system. Based on the analysis results, the improvement direction of the records management system was analyzed from several aspects: functional, software design, and software distribution. This study thus suggests that the creation of a microservice architecture-based (MSA) and an open source software-oriented (OSS) records management system should be the focus of next-generation record management.

• International Journal of Control, Automation, and Systems
• /
• v.2 no.4
• /
• pp.463-474
• /
• 2004

Game theory is a method of mathematical analysis developed to study the decision making process. In 1928, Von Neumann mathematically proved that every two-person, zero-sum game with many pure finite strategies for each player is deterministic. In the early 50's, Nash presented another concept as the basis for a generalization of Von Neumann's theorem. Another central achievement of game theory is the introduction of evolutionary game theory, by which agents can play optimal strategies in the absence of rationality. Through the process of Darwinian selection, a population of agents can evolve to an Evolutionary Stable Strategy (ESS) as introduced by Maynard Smith in 1982. Keeping pace with these game theoretical studies, the first computer simulation of coevolution was tried out by Hillis. Moreover, Kauffman proposed the NK model to analyze coevolutionary dynamics between different species. He showed how coevolutionary phenomenon reaches static states and that these states are either Nash equilibrium or ESS in game theory. Since studies concerning coevolutionary phenomenon were initiated, there have been numerous other researchers who have developed coevolutionary algorithms. In this paper we propose a new coevolutionary algorithm named Game theory based Coevolutionary Algorithm (GCEA) and we confirm that this algorithm can be a solution of evolutionary problems by searching the ESS. To evaluate this newly designed approach, we solve several test Multiobjective Optimization Problems (MOPs). From the results of these evaluations, we confirm that evolutionary game can be embodied by the coevolutionary algorithm and analyze the optimization performance of our algorithm by comparing the performance of our algorithm with that of other evolutionary optimization algorithms.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.3
• /
• pp.305-312
• /
• 2010

The aim of this study is to find an analytic solution to the problem of determining the optimal capacity of a batch-storage network to meet demand for finished products in a system undergoing joint random variations of operating time and batch material loss. The superstructure of the plant considered here consists of a network of serially and/or parallel interlinked batch processes and storage units. The production processes transform a set of feedstock materials into another set of products with constant conversion factors. The final product demand flow is susceptible to joint random variations in the cycle time and batch size. The production processes have also joint random variations in cycle time and product quantity. The spoiled materials are treated through regeneration or waste disposal processes. The objective function of the optimization is minimizing the total cost, which is composed of setup and inventory holding costs as well as the capital costs of constructing processes and storage units. A novel production and inventory analysis the PSW (Periodic Square Wave) model, provides a judicious graphical method to find the upper and lower bounds of random flows. The advantage of this model is that it provides a set of simple analytic solutions while also maintaining a realistic description of the random material flows between processes and storage units; as a consequence of these analytic solutions, the computation burden is significantly reduced. The proposed method has the potential to rapidly provide very useful data on which to base investment decisions during the early plant design stage. It should be of particular use when these decisions must be made in a highly uncertain business environment.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.6
• /
• pp.283-290
• /
• 2015

As society has evolved to the knowledge and information society, the importance of internal information of the company has increased gradually. Especially in financial institutions which must maintain the trust of customers, the disclosure of inside information is a big problem beyond the a company's business information disclosure level to break down sales-based businesses because it contains personal or financial transaction information. Recently, since massive outflow of internal information are occurring in several enterprises, many companies including financial companies have been working a lot in order to prevent the leakage of customer information. This paper describes the internal information leakage incidents occurred in the finance companies, the PC security vulnerabilities exists despite the main security system and internal information leakage prevention and suggests countermeasures against increasing cyber infringement threats.

• Journal of Digital Convergence
• /
• v.12 no.5
• /
• pp.281-293
• /
• 2014

This study is to help fine some factors of how the Initial food consumption ability affects articulation production and intelligibility in children at aged 4-15 with cerebral palsy. According to the factor analysis of articulation production, here are some positive articulation productions; the ability of mumbling and swallowing food, biting and swallowing and liquid diet, the experience of food consumption therapy, the use of specific methods or tools for food consumption, the behavior-problem during a meal and the beginning of the neck control. Therefore, the study finds that the Initial food consumption ability in children with spastic cerebral palsy may affect articulation production and intelligibility.

• Journal of Digital Convergence
• /
• v.14 no.9
• /
• pp.9-18
• /
• 2016

ICT is still lacking relevant studies and efforts even though it needs to be accompanied by character education. Against this backdrop, this study has developed and operated an education program that combines ICT with character education and conducted surveys on its accomplishments. The research findings are as follows. The analysis of theme-based correlations has revealed that individual's character has not significantly affected character for others and global character and that building character for others have made a significant impact on establishing global character with a high level of correlations. Therefore, I have found that a program involving a group of people together such as team-based task has a positive effect on fostering problem-solving talents with global leadership. It is hard to obtain tangible results in character education in a short period of time but I would like to contribute to laying the foundation for cultivating and fostering talents equipped with global leadership while respecting oneself and caring for others in everyday life through these classes. There is a study on convergence of character education and different subjects, left behind of this study.

• Journal of Digital Convergence
• /
• v.16 no.10
• /
• pp.205-212
• /
• 2018

With the development of high performance CPU / GPU, artificial intelligence algorithms such as deep neural networks, and a large amount of data, machine learning has been extended to various applications. In particular, a large amount of data collected from the Internet of Things, social network services, web pages, and public data is accelerating the use of machine learning. Learning data sets for machine learning exist in various formats according to application fields and data types, and thus it is difficult to effectively process data and apply them to machine learning. Therefore, this paper studied a method for building a learning data set for machine learning in accordance with standardized procedures. This paper first analyzes the requirement of learning data set according to problem types and data types. Based on the analysis, this paper presents the reference model to build learning data set for machine learning applications. This paper presents the target standardization organization and a standard development strategy for building learning data set.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.20 no.7_spc
• /
• pp.453-460
• /
• 2016

The Gyeong-Ju earthquake in the magnitude of 5.8 on the Richter scaleoccurred in September 12, 2016. Because there are many nuclear power plants (NPP) near the epicenter of the Gyeong-Ju earthquake, the seismic stability of nuclear power plants is becoming a social problem. In order to evaluate the safety of seismically isolated NPP, the seismic response of a NPP subjected to the Gyeong-Ju earthquake was compared with those of 30 sets of artificial earthquakes corresponding to the nuclear standard design spectrum (NSDS). A 2-node model and a simple beam-stick model were used for the seismic analysis of seismically isolated NPP structures. Using 2-node model, the effect of internal temperature rise, decrease of shear stiffness, increase of lateral displacement and decrease of vertical stiffness according to nonlinear behavior of lead-rubber bearing (LRB) were evaluated. The displacement response, the acceleration response, and the shear force response of the seismically isolated nuclear containment structure were evaluated using the simple beam-stick model. It can be observed that the seismic responses of the isolated nuclear structure subjected to Gyeong-Ju earthquake is significantly less than those to the artificial earthquakes corresponding to NSDS.