• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.10 s.101
• /
• pp.1028-1035
• /
• 2005

OFDM system has high PAPR(Peak-to-Average-Power Ratio) problem. In this paper, we present a low complexity phase weighting method to reduce the computational quantity so that we can cut down the processing time of SPW method. Proposed method is derived from the DFT property of periodical sequences by which PAPR can be reduced efficiently. The simulation results show the same PAPR reduction efficiency of proposed method in comparison with conventional methods. It can reduce 2.15 dB of PAPR with two phase factors and 3.95 dB of PAPR with four phase factors. The computation analysis shows significant improvement in the low complexity phase weighting method.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.7
• /
• pp.677-684
• /
• 2003

This paper addresses the subblock phase weighting(SPW) method to reduce the PAPR in OFDM system. This method divides the input block of OFDM signal into many subblocks and lower the peak power by weighting the phase of each subblocks properly. SPW method can be realized by only one IFFT. PAPR reduction performance is novelly examined when the adjacent, interleaved and random subblock partitioning schemes are used in the SPW system. The random subblock partition scheme has the most effective. More subblocks can effectively reduce the PAPR, but there is a problem that the processing time of iteration is increased. We propose a new weighting factor combination of the complementary sequence characteristic with threshold technique. OFDM data can be recovered by the inserted side information of weighting factor in the feed forward type. Also, BER performance of this SPW system is analyzed when error happens in the side information.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.10
• /
• pp.996-1003
• /
• 2003

There are critical drawbacks in fabricating MMIC transversal filters because the length of the conventional transversal filter structure is much longer than the width. In order to solve this structural problem, a transversal filter using multiple-coupled-line directional couplers which can achieve tight coupling is proposed. The length of the proposed transversal filter can be made short using multiple-coupled-line couplers so that the structure of the proposed filter is applicable to MMIC technology. Because of the dielectric and conductor losses, the excited signal at the input port becomes smaller when it progresses through each directional coupler. Therefore, the strength of the coupled signals at the latter directional couplers becomes smaller than the designed one and this, in turn, gives rise to performance aggravation. A modified coupling coefficient formula to prevent frequency characteristic degradation is introduced. The proposed filter structure and the design method are verified by the calculated result and 3D full-wave analysis.

• Journal of the Korean Home Economics Association
• /
• v.27 no.3
• /
• pp.13-28
• /
• 1989

With the purpose of identifying clothing for persons with special needs one of new directions in Clothing and Textiles, this pater comparatively analyzed current curriculum and research trends related to this field between Korea and America. Questionaire was distributed to 25 Korean colleges with Clothing and Textiles department and 4 American colleges known for special clothing study. Questions regarded the name of course, level (grade), number of credit houre, prerequisits and supporting courses, subjects of lecture and projects, way of managing lecture and projects, evaluation system, other special characteristics. Resources for analyzing research trends are Thesis and Dissertations in Clothing and Textiles, Research Journal of Clothing & Textiles/Home Economics Association, College Professors' research reports collection, of both Korea and America. Years of publications are 1972∼1986 (America), 1978∼1988 (Korea). Findings are as follows; 1. Clothing for special needs can be classified into various groups; Clothing for physically handicapped, mentally retarded, elderly, unusual-sized, pregnant/nursing mothers, institutionalized, protective clothing, uniform/career apparel. 2. Management of coursework related to special clothing has several common characteristics specially in America; Building-up coursework, problem-solving orientation, cooperative team-preject, interdisciplinary approach, client-versus-designer preference, community involvement. In Korea, a few school only has special clothing coursework and its scope of study was very limited. 3. Majority of research reports done with the subjects of special clothing had made for physically handicapped people and the elderly. Protective clothing and uniform have recently been paid much interests. 4. Researchers had mainly concerned on Design and Construction Aspects and nextly on social-psychological aspects. However, in America, selection and care aspects and marketing aspects of special clothing have been very procuctive issues recently. 5. Study on clothing for special needs has several opportunities to be stressed and improvements to be strengthened. Opportunities included active participation to the welfare of community society, strong publicity of accurate professional image, share with business and industry, interdisciplinary approach and new job market. Improvements were discussed in terms of strengthening supporting courses/prerequistes, intensifying interdisciplinary cooperation, provoking strong community involvement and securing financial support and research funds.

• Journal of The Korean Astronomical Society
• /
• v.48 no.1
• /
• pp.21-55
• /
• 2015

If the Universe is dominated by cold dark matter and dark energy as in the currently popular ${\Lambda}CDM$ cosmology, it is expected that large scale structures form gradually, with galaxy clusters of mass $M{\geq}10^{14}M_{\odot}$ appearing at around 6 Gyrs after the Big Bang (z ~ 1). Here, we report the discovery of 59 massive structures of galaxies with masses greater than a few times $10^{13}M_{\odot}$ at redshifts between z = 0.6 and 4.5 in the Great Observatories Origins Deep Survey fields. The massive structures are identified by running top-hat filters on the two dimensional spatial distribution of magnitude-limited samples of galaxies using a combination of spectroscopic and photometric redshifts. We analyze the Millennium simulation data in a similar way to the analysis of the observational data in order to test the ${\Lambda}CDM$ cosmology. We find that there are too many massive structures (M > $7{\times}10^{13}M_{\odot}$) observed at z > 2 in comparison with the simulation predictions by a factor of a few, giving a probability of < 1/2500 of the observed data being consistent with the simulation. Our result suggests that massive structures have emerged early, but the reason for the discrepancy with the simulation is unclear. It could be due to the limitation of the simulation such as the lack of key, unrecognized ingredients (strong non-Gaussianity or other baryonic physics), or simply a difficulty in the halo mass estimation from observation, or a fundamental problem of the ${\Lambda}CDM$ cosmology. On the other hand, the over-abundance of massive structures at high redshifts does not favor heavy neutrino mass of ~ 0.3 eV or larger, as heavy neutrinos make the discrepancy between the observation and the simulation more pronounced by a factor of 3 or more.

• Journal of the Korean BIBLIA Society for library and Information Science
• /
• v.5 no.1
• /
• pp.85-105
• /
• 1981

Information is an essential factor leading the rapid progress which is one of the distinguished characteristics in modem society. As more information is required and as more is supplied by individuals, governmental units, businesses, and educational institutions, the greater will be the requirement for efficient methods of communication. One possibility for improving the information dissemination process is to use computers. The capabilities of such machine are beginning to be used in the process of Information storage, retrieval and dissemination. An important problems, that must be carefully examined is whether one technique for information retrieval is better for worse than another. This paper examines problem of how to evaluate an information retrieval system. One specific approach is a cost accounting model for use in studying how to minimize the cost of operating a mechanized retrieval system. Through the use of cost analysis, the model provides a method for comparative evaluation between systems. The general cost accounting model of the literature retrieval system being designed by this study are given below. 1. The total cost accounting model of the literature retrieval system. The total cost of the literature retrieval system = (the cost per unit of user time X the amount of user time) + ( the cost per unit of system time X the amount of system time) 2. System cost accounting model system cost = (the pre-search system cost per unit of time X time) + (the search system cost per unit of time X time) + (the post search system cost per unit of time X time) 1) Pre-search system cost per unit of time = cost of channel per unit time + cost of central processing unit per unit time + cost of storage per unit time 2) Search system cost per unit of time = comparison cost + document representation cost. 3) Post-search system cost per unit of time. = cost of channel per unit time + cost of central processing unit per unit time + cost of storage per unit time 3. User cost accounting model Total user cost = [pre-search user cost per unit of time X (time + additional time) ] + [search user cost per unit of time X (time + additional time) ] + [post-search user cost per unit of time X (time + additional time) ].

• Journal of Broadcast Engineering
• /
• v.20 no.6
• /
• pp.837-847
• /
• 2015

In this paper, the reception performance of spatial modulation multiple-output multiple-input (MIMO) is analyzed for high speed terrestrial broadcasting. The MIMO scheme is required to reduce the inter symbol interference (ISI) and spatial correlation. The spatial modulation scheme solves the problem of ISI, but the spatial correlation degrades the reception performance of SM scheme. The space-time block coded spatial modulation (STBC-SM) is combined the SM system with space-time block code (STBC) for reducing the effects of the spatial correlation. However, the STBC-SM scheme degrades the spectral efficiency by transmitting same data in the two symbol period. The double space-time transmit diversity with spatial modulation (DSTTD-SM) scheme transmits the data with full antenna combination. To adapt these SM MIMO systems into the terrestrial broadcasting system, the reception performance is analyzed using computer simulation in SUI channel environments.

• Journal of Broadcast Engineering
• /
• v.17 no.6
• /
• pp.1091-1105
• /
• 2012

In this paper, we analyzed statistical characteristics and complexity of HEVC encoder as a leading research of acceleration, optimization and parallelization. Computational complexity of the HEVC encoder is approximately twice the compression performance compared to H.264/AVC. But, the increase of encoder complexity remains a problem to be solved in the future. Before performing the research on acceleration, optimization and parallelization to reduce high complexity of HEVC encoder, we measure the complexity each module for HEVC encoder using it's reference software HM 7.1. We also measured the predicted complexity of fast HEVC encoder software, used in real applications, using HM 7.1 applying fast encoding method. The complexity is measured in terms of the operating cycle of the encoder software under the common test sequences and conditions in the Windows PC environment. In addition, we analyze statistical characteristics of HEVC encoder software according to encoding structures and limitation using coded bitstreams.

• Journal of the Korean Society of Costume
• /
• v.57 no.2 s.111
• /
• pp.1-10
• /
• 2007

This study aims at the improvement of sewing function through understandings of dynamic property about the sewing methods and the thread material selection in knitwear. The tensile strength and shear of KES-FB and the Instron were measured for the analysis of the mechanical properties. The knit cloth was structured In the plain stitch, $1\times1$ rib stitch and $2\times1$ rib stitch with the combination of wool and cotton. With regard to the sewing method, intralooping and interlacing were applied. For thread materials, polyester, cotton, wool and silk were used. Since silk has the lowest extension and similar values regardless of its construction in intralooping, it is available knit apparel with uniform elastic recoverv. It also has small shearing resistance. It can be used in apparel which needs big mobility, but it causes rutting problem. Therefore, it is suitable to use intralooping. When the same sewing yarn and textile are use, it can lower shearing resistance and extension in intralooping, Since wool needs a lot of extension energy and it can be cut, intralooping is more suitable than interlacing in sewing of wool. In interlacing using polyester, extension and shearing resistance are high. Therefore, it is suitable for knit sewing with high massing. Silk is not suitable for interlacing since it can be rut. Even though knit materials are different, the RT values of polyester and cotton are similar in same construction. Therefore, they can be substituted each other considering resilience after sewing.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.14 no.5
• /
• pp.1033-1042
• /
• 1994

Dynamic behavior of flexible rectangular liquid containers is analyzed by a two-dimensional coupled boundary element-finite element method. The irrotational motion of inviscid and incompressible ideal fluid is modeled by boundary elements and the motion of structure by finite elements. A singularity free integral formulation is employed for the implementation of boundary element method. Coupling is performed by using compatibility and equilibrium conditions along the interface between the fluid and structure. The fluid-structure interaction effects are reflected into the coupled equation of motion as added fluid mass matrix and sloshing stiffness matrix. By solving the eigen-problem for the coupled equation of motion, natural frequencies and mode shapes of coupled system are obtained. The free surface sloshing motion and hydrodynamic pressure developed in a flexible rectangular container due to horizontal and vertical ground motions are computed in time domain.