• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2011년도 추계학술논문집 2부
• /
• pp.488-491
• /
• 2011

본 논문에서는 항공기에 장착되는 동정압 프로브의 열선 설계에 대한 내용이다. 항공기에 장착되는 동정압 프로브는 방빙/제빙 기능이 매우 중요하고 기본 설계 단계에 해석에 의해서 설계가 수행되어야 한다. 여기서는 동정압 프로브를 해석하기 위한 설정 조건과 해석 방법 및 해석결과에 대하여 기술하였다.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2002년도 가을 학술발표논문집 Vol.29 No.2 (2)
• /
• pp.367-369
• /
• 2002

DNA 칩에서 사용되는 프로브를 가장 효과적으로 설계하기 위해서는 상보결합을 위한 1차구조뿐만이 아니라 열역학적인 움직임과 함께 2차구조가 고려되어야만 한다. 그러나 핵산의 기능에 큰 영향을 미치는 2차구조에 대한 연구는 일찍부터 진행되어 왔지만, 상대적으로 DNA에 대한 연구는 크게 미흡한 것이 현실이다. 이에 우리는 유전자 알고리즘을 이용한 핵산의 이차구조 예측을 통해서 보다 효과적인 프로브의 설계를 위한 방법을 고안했다.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2004년도 봄 학술발표논문집 Vol.31 No.1 (A)
• /
• pp.463-465
• /
• 2004

베디드 시스템의 발전으로 인하여 고성능화, 소형화, 편의성 등이 강조되어 지는 시점에서 의료장비 또한 임베디드 시스템 기술 도입이 빠르게 진행되어 지고 있다. 본 논문에서는 초음파 영상진단 단말기 (Magic-Probe)를 구현하기 위해 SA-1100 마이크로 프로세스 레퍼런스 보드에 리눅스 커널을 포팅하고 포팅된 플랫폼을 기반으로 초음파 영상진단을 처리하기 위한 응용프로그램의 설계 및 구현에 관하여 논하도록 하겠다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 C
• /
• pp.2034-2036
• /
• 2005

Four Point Probe 방법을 이용한 반도체 wafer의 면저항 측정을 위하여 single configuration 기술을 적용한 회로를 설계 제작하였으며, 제작된 FPP장치의 면저항 측정범위는 $10{\sim}3000{\Omega}/sq.$ 이고 측정의 정확도는 약 0.5%이하이다.

• 대한기계학회논문집A
• /
• 제29권2호
• /
• pp.303-310
• /
• 2005

The systems with probe and SIL(Solid Immersion Lens) mechanisms have been researched as the technology to perform NFR(Near Field Recording). Most of them use the flying head mechanism to accomplish high recording density and fast data transfer rate. In this paper, ABS shape of flying head was optimized with the object of securing the maximum compliance ability of OFH. We suggest low different optimization processes to predict the static flying characteristics for the OFH. Two different approximation methods, regression analysis and back propagation neural network were used. And we compared the result of directly connected(between CAE and optimizer) method and two approximated optimization results. Design Optimization Tool(DOT) and ${\mu}GA$ were used as the optimizers.

• 한국CDE학회논문집
• /
• 제18권4호
• /
• pp.243-249
• /
• 2013

This paper presents a tool-path generation methods for an automated robotic system for skull drilling, which is performed to access to some neurosurgical interventions. The path controls of the robotic system are classified as move, probe, cut, and poke motions. The four motions are the basic motion elements of the tool-paths to make a hole on a skull. Probing, rough cutting and fine cutting paths are generated for skull drilling. For the rough cutting path circular paths are projected on the offset surfaces of the outer top and the inner bottom surfaces of the skull. The projected paths become the paths on the top and bottom layers of the rough cutting paths. The two projected paths are blended for the paths on the other layers. Syntax of the motion commands for a file format is also suggested for the tool-paths. Implementation and simulation results show that the possibility of the proposed methods.

• 시스템엔지니어링학술지
• /
• 제12권1호
• /
• pp.25-40
• /
• 2016

The Systems Engineering (SE) approach is characterized by the application of a structured engineering methodology for the design of a complex system or component. In this study, the SE methodology is used to design a nondestructive inspection system for Bottom Mounted Instrumentation (BMI) nozzles. We developed a system that enables nondestructive inspection of BMI nozzles during regular refueling outage without removing the reactor internals. A special ultrasonic (UT) probe is introduced to scan and detect cracks within the weld region of the nozzle. A 3D model of the inspection structure system was developed along with the reactor pressure vessel (RPV) and internals which permits a virtual 3D simulation of the operation to check the design concept and effectiveness of the system and to provide a good visualization of the system. This approach allows for a virtual walk through to verify the proposed BMI nozzle inspection system.

• 소성∙가공
• /
• 제27권4호
• /
• pp.244-249
• /
• 2018

Rhodium is a representative platinum group material. Rhodium is used in several industrial fields including jewelry, chemical reaction catalyst, electric component etc. In recently, ultra-fine rhodium wire has been applied to the pins of probe card used to test a semiconductor. In this study, in order to produce a fine rhodium wire with the diameter of $50{\mu}m$, a fine rhodium wire drawing process was designed. After design of the fine wire drawing process by using a uniform reduction ratio theory, finite element analysis was performed. Finally, fine wire drawing experiment was performed to verify the effectiveness of the designed process.

• 한국의상디자인학회지
• /
• 제2권2호
• /
• pp.81-94
• /
• 2000

This study attempted to make a comparative investigation into architecture and fashion. It was intended to grasp the contemporary meaning of fashion expressed in fashion by investigating the image of lightness expressed in contemporary fashion. With the increasing trend of the characteristics of lightness over the whole field of contemporary design, this study took an opportunity to probe its understanding and a desirable direction of expression. The study results were summarized as follows: First, flexibility conveys comfortableness and lightness that makes people feel wear no costume in a soft and flowing style. This phenomenon is thought to express the desire to depart from the dismal and heavy ideology of the past times. Second, lightness is expressed as the virtual transparency felt from what is spatial. It shows a sense of openness while removing the internal and external boundary. Third, liberalness expresses the unfettered consciousness of freedom by expressing an open, free image through free, thin and transparent fashion.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.1742-1745
• /
• 1997

We have developed a highly responsible probing system for inspection of electrical properties of assemble PCB$_{s}$ (printed circuit boards). However, as the duration of the impact occurring between a probe and a solder joint on PCB is very short, it is very difficult to control the harmful peak impact force and the slip motion of the probe to sufficient level only by its vorce feedback control with high gains. To overcome these disadvantages of the prototype, it needs ot obtain some information of the solder joint in advance before the contact. In addition, to guarantee the reliability of the probing task, the probing system is required to measure several points around the probale target point at high speed. There fore, to meet such requirements, we propose a new noncontaet sensor capable of detecting simultaneously position and normal vectors of the multiple points around the probable target point in real time. By using this information, we can prepare a control strategy for stable contact motion on impact. In this paper, we described measuring priniciple, design, and development of the sensor. The effectiveness of the proposed sensor is verified through a series of experiments.s.