• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.06a
• /
• pp.629-630
• /
• 2008

• ALGAE
• /
• v.22 no.4
• /
• pp.253-259
• /
• 2007

This study deals with the taxonomy of the marine diatom Ditylum brightwellii (West) Grunow: shape, size and ratio, marginal ridge, labiate process, areolation, and seasonal distribution are all considered. Ditylum brightwellii were divided into two type; prism- and cylinder-shaped. Comparisons between specimens from the Yellow Sea were made on, (1) shape- prism types are prismatic-shaped and/or regular square or right-angled tetragon, cylinder types are cylinder-shaped and/or long right-angled tetragon in the girdle view, respectively; (2) size and ratiodiameters of prism types are 82.1 ± 2 μm, while those of cylinder types are 21.2 ± 5 μm and ratio of pervalvar axis/diameter- prism types cells are 1.0-1.5, but cylinder types are 3.9-5.5; (3) marginal ridges- prism types have dotted, while those of the cylinder-type cells have piece, slotted or fimbriated on the marginal ridge; (4) labiate process- both prism- and cylinder-types are central part in valve face, but length of labiate processes of prism types are longer than those of cylinder types; (5) cell margin- the girdle margin show many shallow furrows in prism type and smooth in cylinder type; (6) areolation- both prism- and cylinder-types are a radial pattern in the valve center, but areolae of prism types are larger than those of cylinder types; (7) seasonal distribution- cylinder types are dominated in summer and prism types in the other seasons.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2007.06a
• /
• pp.229-230
• /
• 2007

• Journal of the Optical Society of Korea
• /
• v.8 no.3
• /
• pp.122-126
• /
• 2004

The method to obtain four speckle patterns with relative phase shift of ${\pi}/2$ by passive devices such as two waveplates and a linear polarizer, awl to calculate the phase at each point of the speckle pattern in shearography with a Wollaston prism is presented, and the feasibility of the proposed method is theoretically demonstrated by Jones vector.

• Atmosphere
• /
• v.24 no.1
• /
• pp.101-110
• /
• 2014

This study estimates and evaluates the daily January temperature from 2003 to 2012 with 30 m-resolution over South Korea, using a modified Parameter-elevation Regression on Independent Slopes Model (K-PRISM). Several factors in K-PRISM are also adjusted to 30 m grid spacing and daily time scales. The performance of K-PRISM is validated in terms of bias, root mean square error (RMSE), and correlation coefficient (Corr), and is then compared with that of inverse distance weighting (IDW) and hypsometric methods (HYPS). In estimating the temperature over Jeju island, K-PRISM has the lowest bias (-0.85) and RMSE (1.22), and the highest Corr (0.79) among the three methods. It captures the daily variation of observation, but tends to underestimate due to a high-discrepancy in mean altitudes between the observation stations and grid points of the 30 m topography. The temperature over South Korea derived from K-PRISM represents a detailed spatial pattern of the observed temperature, but generally tends to underestimate with a mean bias of -0.45. In bias terms, the estimation ability of K-PRISM differs between grid points, implying that care should be taken when dealing with poor skill area. The study results demonstrate that K-PRISM can reasonably estimate 30 m-resolution temperature over South Korea, and reflect topographically diverse signals with detailed structure features.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.19 no.2
• /
• pp.27-46
• /
• 2016

In this study, the parameter-elevation regressions on independent slopes model-Kongju National University(PRISM-KNU) system was developed to interpolate monthly precipitation data. One of the features of PRISM-KNU is that it can adjust the allowable range of slope according to the elevation range in the equation representing a linear relationship between the precipitation and elevation. The parameter value of the model was determined by using the optimization technique, and the result was applied to produce monthly precipitation data with a spatial resolution of $1{\times}1km$ from 2000 to 2014 in South Korea. In the result, the Kling-Gupta Efficiency for model evaluation was over 0.7 in 86% of the total cases simulated. In addition, a dramatic change in the spatial pattern of precipitation data was observed in the output of the Modified Korean PRISM, but such a phenomenon did not occur in the output of the PRISM-KNU. This study confirmed the appropriateness of the PRISM-KNU, and the result showed that the spatial consistency of the data produced by the model improved compared with that produced by the Modified Korean PRISM. It is expected that the PRISM-KNU and its output will be utilized in various studies in the future.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.8
• /
• pp.1-7
• /
• 2005

We introduced the method to obtain four speckle patterns with relative phase shift of ${\pi}/2$ by the polarizing elements, and calculate the phase at each point of the speckle pattern in shearography using Wollaston prism and polarizing elements. Ant we analyzed the phase error caused by the azimuth angles of wave plates used in the proposed method by Jones matrix.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.04a
• /
• pp.179-185
• /
• 1997

This paper presents machine vision technique with a camera modeling that accounts for major sources of camera distortion, namely,radial, decentering, and thin prism distortion. Radial distortion causes an inward or outward displacement of a given image point from its ideal location. Actual optical systems are subject to varios degrees of decentering,that is,the optical centers of lens elements are not strictly collinear. Thin prism distortion arises form imperfection in lens design and manufacturing as well as camera assembly. It is our purpose to develop the vision system for the pattern recognition and the automatic test of and to apply the line of part manufacturing.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.05a
• /
• pp.257-258
• /
• 2010

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2009.06a
• /
• pp.407-408
• /
• 2009