• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37A no.9
• /
• pp.728-737
• /
• 2012

An analytical method for identifying terrestrial broadcasting coverages is proposed for a terrestrial broadcasting transmission system adopting a hierarchical modulation technique. Bit Error Rates(BERs) are derived for hierarchically modulated non-uniform QAM constellations based on the Q-function analysis in AWGN environments. The derived BERs depend on the hierarchical modulation factor ${\alpha}$(HMF) and could be mapped to the broadcasting coverages according to the link budget analysis based on the log-distance path loss model. Finally the broadcasting coverage ratios for high priority(HP) streams and low priority(LP) streams are calculated and presented for the determination of the HMF.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.1A
• /
• pp.62-69
• /
• 2005

Efforts for standardization of medium access control (MAC) protocol in IEEE802.11e have been made to support quality of service (QoS) in IEEE802.11e MAC protocol. Enhanced disoibuted coordination function (EDCF) of 802.11e MAC protocol is modified to support QoS for packets that have differentiated priority. However, EDCF still has the problem of throughput optimization and priority support. Therefore, we have proposed a scheme called adaptive EDCF for both supporting priority of packets and throughput optimization. We have derived the relation between the number of nodes and contention window size for throughput optimization. Based on the analytic results, we have evaluated the performance of the proposed scheme using OPNET simulations. The simulation results show that using the proposed scheme can improve the overall throughput regardless of the number of nodes and the decrement of the throughput with increasing the number of nodes can be alleviated. Additionally, we have shown that the adaptive EDCF can support priority of packets more effectively than existing EDCF.

• Journal of Korean Society for Quality Management
• /
• v.50 no.1
• /
• pp.125-138
• /
• 2022

Purpose: Failure Mode and Effect Analysis (FMEA) is a widely utilized technique to measure product reliability by identifying potential failure modes. Even though FMEA techniques have been studied, the form of Risk Priority Number (RPN) used to evaluate risk priority in FMEA is still questionable because of its shortcomings. In this study, we suggest common RPN(cRPN) to resolve shortcomings of the traditional RPN and show the extensibility of cRPN. Methods: We suggest cRPN which is based on Cobb-Douglas production function, and represent the various application on weighting risk factors, weighted RPN in a mathematical way, and show the possibility of statistical approach. We also conduct numerical study to examine the difference of the traditional RPN and cRPN as well as the potential application from the analysis on marginal effects of each risk factor. Results: cRPN successfully integrates previously suggested approaches especially on the relative importance of risk factors and weighting RPN. Moreover, we analyze the effect of corrective actions in terms of econometric analysis using cRPN. Since cRPN is rely on the reliable mathematical model, there would be numerous applications using cRPN such as smart factory based on A.I. techniques. Conclusion: We propose a reliable mathematical model of RPN based on Cobb-Douglas production function. Our suggested model, cRPN, resolves various shortcomings such as consideration of the relative importance, the effect of combinations among risk factors. In addition, by adopting a reliable mathematical model, quantitative approaches are expected to be applied using cRPN. We find that cRPN can be utilized to the field of industry because it is able to be applied without modifying the entire systems or the conventional actions.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.1
• /
• pp.144-154
• /
• 1996

Proposed numerous algorithms for the policing function have mainly focused on their performances. Besides their performance evaluation, however, the VLSI-implementation of these algorithms is worth consideration as well. Although, no algorithms for the policing function have been standardized up to now, ITU-T I.371 suggests two examples of algorithms, the Virtual Scheduling Algorithm (VSA) and the Continuous State Leaky Bucket algorithm. In this paper, we suggest the architecture of a policing device implementing the VSA among various algorithms for the peak cell rate policing and discuss some issues on the implementation. We also present how to select the policing modes of the two devices used to realize various policing schemes and show the experimental results obtained under four different peak cell rate values to confirm that the device performs the policing function satisfactorily. We exploit the priority encoder to run the algorithm in parallel instead of sequentially, which reduces the operation time to a great extent.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.2
• /
• pp.198-206
• /
• 2013

This paper presents the improvement of tracking performance using fuzzy inference system based task prioritizations for multi-function radars. The presented technique calculates elemental priorities using track information of a target and obtain the total priority from fuzzy inference system of each fuzzy set's membership function. In this paper, we proposed the task prioritization algorithms based on fuzzy inference system, and evaluated the tracking performance on multi-function radar scenario using it. As a result, we confirmed that excellent performance could be achieved when using the proposed algorithm.

• Korean Journal of Optics and Photonics
• /
• v.12 no.2
• /
• pp.109-114
• /
• 2001

Optical system has some optical and mechanical constraints. The constraints should be preserved in optimization of optical system. For the purpose, the constraints are combined with the merit function by using Lagrange's undetermined multipliers. We propose an active optimization control by using the fact that the errors of constraints are corrected with higher priority than the other errors of the merit function. In this control, the errors which have large contribution to the merit function are converted into constraints. At that time, if the errors are corrected at once, the optimization will be unstable because of their non-linearity. Hence we introduce a target rate which represents a fraction of error to be corrected, and the errors are corrected progressively. An optimization program was developed on the bases of the proposed active control, and applied to design a photographic lens system. By using the active control, we could get better results compared with conventional damped least squares method. ethod.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1993.10a
• /
• pp.142-148
• /
• 1993

Recectly, development of expert system utilizing the domain specific knowledge focuses upon the machining operations. This paper describes an expert system for selecting the optimum grinding wheel based on the Analytic Hierarchy Process and Fuzzy Logic. Knowledge-base, in this system, for selecting of grinding wheel is designed to appling the knowhow and experience knowledge of skilled hands. In this paper, firstly determination method of fuzzy membership function utilizing the qualitative knowledge, and then selection of the optimum wheel from among the available components according to Saaty's priority rule are described. Lastly,some implementation results are suggested.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2003.10a
• /
• pp.44-47
• /
• 2003

Continuous decreases in national budget for the field of agricultural engineering indicate that it plays less important role in Korean agriculture compared to the past. It also suggests that its function should be changed in order to meet the needs of future agriculture. Unfortunately, there are few private companies for agricultural engineering except for farm machinery. Fostering private business for agricultural engineering may be one of the top priority for the development of the field.

• 제어로봇시스템학회:학술대회논문집
• /
• 1988.10a
• /
• pp.497-500
• /
• 1988

The multi-task operating system called HRMTOS (HUNDAI Robot Multi-task Operating System) was developed for concurrent execution. HRMTOS consists of condition interpreter, queue constructor, task scheduler. Condition interpreter checks the status and condition of request, queue constructor makes queue according to the checked result by condition interpreter, and task scheduler finds the task that will be urgently executed by priority of queue after pending the current excuting task. HRMTOS could execute teaching, playback, monitoring function of multi-robot and could be used more effectively than other robot controllers.

• Management & Information Systems Review
• /
• v.4
• /
• pp.67-88
• /
• 2000

The purpose of this study is to present models for evaluation and selection of DataBase Management Systems(DBMS) suppliers. The major concern of management is that most decision problems have multiple, usually conflicting, criteria. The fuzzified multiple-objective programming models are given to accomodate the aspiration level and satisfaction level of decision makers. The proposed models are classified into two types, that is, pre-emptive priority and interpolated non-membership function model. Numerical examples illustrating each type of model are presented and the implications of these models are discussed.