• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.8
• /
• pp.1190-1200
• /
• 1993

In this work, the performance of both delay sensitive traffics and loss sensitive traffics of the output buffered ATM switch with priority control mechanisms has been evaluated. We choose the partial buffer sharing mechanism as the loss priority control mechanism and the HOL(Head Of Line) priority control mechanism as the time priority control mechanism. We model loss sensitive traffics with Poisson process and delay sensitive traffics with MMPP. With loss priority control, it is confirmed that loss probability of loss sensitive traffice decreases when the loss priority control mechanism is chosen. With time priority control, it has also been confirmed that mean cell delay of delay sensitive traffics decreases when the HOL priority control mechanism is used. From this analysis, It has been confirmed that the requirements of QOS for both loss sensitive and delay sensitive traffics can be satisfied in the ATM switch by combining both the loss priority control mechanism and the HOL priority control mechanism.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.15 no.2
• /
• pp.95-101
• /
• 2020

In situations where mobile robots are operated either by autonomous systems or human operators, such as smart factories, priority-based teleoperation is crucial for the multiple operators with different priority to take over the right of the robot control without conflict. This paper proposes a priority-based teleoperation system for multiple operators to control the robots. This paper also introduces an efficient joystick-based robot control command generation algorithm for differential-drive mobile robots. The proposed system is implemented with ROS (Robot Operating System) and embedded control boards, and is applied to Pioneer 3AT mobile robot platform. The experimental results demonstrate the effectiveness of the proposed joystick control command algorithm and the priority-based control input selection.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.12 no.2
• /
• pp.140-149
• /
• 2000

A comparative analysis was peformed on the operation cost at partial loads between ice storage systems with the two conventional control strategies, i.e., storage priority and chiller priority. The storage priority control is shown to be more economic for small cooling loads, while the chiller priority control is superior when the cooling load is as large as the design value. Based on this finding, a new control strategy is devised for an ice-storage system to minimize the operation cost at any cooling load. The new control strategy is found to be comparable to the chiller priority for large cooling loads, while it is more economic for small loads compared to the conventional control strategies. The practicality of the new control strategy is also confirmed through a performance test applying the new control strategy to an existing ice-storage system.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.44 no.3
• /
• pp.417-423
• /
• 2024

This study compared and analyzed the importance of command priority between railway traffic controllers through pairwise comparison of AHP analysis. 27 railway traffic controllers working on metropolitan railway control center, urban railway control center, and unmanned driving control center responded. As a result of the analysis, all the railway traffic controllers generally recognized the train driving control and train signal control as the most important priorities. For the controller in the manned driving system, a train driving control was the highest at 0.375. On the other hand, the controller based on unmanned driving recognized train signal control as the highest priority at 0.469. In the result of the AHP analysis considering all the variables, the braking system was the highest priority at 0.19 based on manned train driving. On the other hand, the controller based on unmanned train driving recognized wired and wireless network systems and SCADA as the highest priority at 0.267.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.17 no.2
• /
• pp.156-164
• /
• 2005

A comparative analysis of an ice storage system has been performed on the operation cost for the four control strategies, i.e., chiller priority and chiller downstream, chiller priority and chiller upstream, storage priority and chiller upstream, storage priority and chiller downstream. Main components of the ice storage system are an ice-on-coil storage tank and a screw compressor chiller. With the simulation program, the operation cost has been evaluated from the economics of an ice storage system. It is found that the operation cost of the ice storage system is strongly dependent on the control strategy, i.e., chiller priority or storage priority, but less affected by the arrangement method, i.e., chiller upstream or chiller downstream. In case of the maximum load day, the control strategy with chiller priority and chiller upstream is supposed to obtain the reduction of operation cost. However, it is found that the control strategy with storage priority and chiller downstream is the best economical operation for most summer seasons except the maximum load day.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.51 no.6
• /
• pp.63-68
• /
• 2009

Most of agricultural reservoirs in Korea have no function of flood control except 5% of reservoirs even exposed to natural disaster. In addition, there are increasing needs for the reservoir to guarantee the release of environmental flow to the downstream. Thus, the purpose of this paper is to study the priority decision method for the reservoir redevelopment satisfying both water utilization and flood control. The major scopes of this research are to set up six priority indices and to make needed GIS data for calculating each priority. There is important consideration of obtaining the data or not in deciding the indices. Although the detailed indices is expected to better reflect redevelopment priority but the subjective indices like, 'opinion' and 'landscape' are excluded. From the results, it will enables the six priority indices to really assist in decision redevelopment priority of agricultural reservoirs.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.06c
• /
• pp.339-342
• /
• 1998

The various services that a broadband integrated services digital network (B-ISDN) carries, have a wide range of delay, delay jitter and cell loss probability requirements. Design of appropriate control schemes for B-ISDN is an extremely important and challenging problem. In this paper, we proposes a priority control scheme with a delay counter and a cell counter per each class type. The priority control for required service quality is performed with delay/loss factor obstained by comparing window counter with cell counter. The performance of proposed control scheme is estimated by computer simulation.

• Journal of Korea Multimedia Society
• /
• v.8 no.6
• /
• pp.744-752
• /
• 2005

When the multiple video sources are transmitted together through the channel of fixed bandwidth, an efficient picture quality control is necessary. This paper presents a joint picture quality control method to satisfy the user requirement by priority among the video sources. The better picture quality is assigned to the source of higher priority compared to lower priority. We obtain the bitrate for each source to have a required distortion level among the sources by using an approximate distortion-bitrate model for simple implementation. It is shown by simulation that the proposed bandwidth allocation method can keep almost the user-required picture quality among the sources in comparison to an independent bandwidth allocation method.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.687-690
• /
• 2003

This paper presents the development of Programmable Logic Controller (PLC) and network to design the redundant control system in order to control the high priority process. The industrial process that cannot be shutdown or the effect of the shutting down takes abundantly damage. In this article, we say that the high priority process. The redundant systems are designed for controlling the high priority process that the control system must have many controllers to instead the main controller when it has some error. This paper we designed the redundancy control system by the advantage of the high-speed communication on the PLC’s network. The temperature control system and the traffic light control system used as the case study. Each example processes consist of two sets of controller. Our scheme we can increase the reliability prevents process down time and reduces the cost of opportunity to loss also.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.12 no.11
• /
• pp.982-993
• /
• 2000

This paper describes an optimal control scheduling of an encapsulated ice storage system with a chiller of nominal chiller 34RT(103,200kcal/hr) and an ice storage tank of 170RT-hrs(514,080 kcal). The optimization technique used in the study is dynamic programing. The objective function is summed cost during a day including charge and discharge periods. Control strategies being used commercially are chiller priority and storage priority control. In chiller priority control, the chiller is allowed to run at full capacity during the day, subject to limitations of the building load, and the ice is only melted when and if the load exceeds the chillers full capacity. In contrast to chiller priority control, the aim in storage priority control is to melt as much as ice as possible during the day time period. The system simulation calculates the operation costs for the three control strategies in the condition of the same cooling load and the same ice storage system. The simulation period is a day, assuming that initially the tank is stored fully and the cooling load is perfectly predicted for the scheduling. Also Final state of the tank is to be charged fully.