• Preventive Nutrition and Food Science
• /
• v.16 no.3
• /
• pp.267-271
• /
• 2011

Static Headspace Gas Chromatographic analysis was used to study the partitioning behavior of five organic printing ink solvents between chocolate cookie/air systems. Three cookie sample formulations varied with respect to chocolate type and overall percentage of constituents. Major considerations involved differences in fat content and type and resulting variability in chemical and physical structure. Each of the solvents studied (ethyl acetate, hexane, isopropanol, methyl ethyl ketone, toluene) represents a general class of printing ink solvents based on predominate functional group. Values of the partitioning coefficient (Kp) were determined at equilibrium using measured quantities of both solvent and cookie sample in closed systems at temperature of 25, 35, and $45^{\circ}C$. In each of the three cookies at the three test temperatures, toluene always exhibited the greatest value of partitioning to cookie and hexane always exhibited the least. Results also showed that the partitioning behavior of solvents is generally inversely related to temperature and that solvent affinity, though constant for a particular cookie type over all test temperatures, varies significantly among the three cookie types. The preference of each of the five solvents for each cookie sample was also found to vary with temperature. No correlation was found between the extent of partitioning and cookie formulation or physical characteristic of solvent. The Hildebrand parameter, related to ${\Delta}Hmix$ (heat of mixing), may be used to describe differences in partitioning based on the overall potential of a solvent/cookie interaction to occur. The potential for interaction is dependent upon the chemical structure of the cookie sample and thus the availability of 'active-sites' required for a given solvent.

• Journal of Fashion Business
• /
• v.22 no.2
• /
• pp.1-13
• /
• 2018

3D printing technology, which is expected to play a leading role within the Fourth Industrial Revolution, is becoming distinguished not only in the space, automotive, medical and engineering industries, but also in the area of design. The fashion and textile structures created by 3D printing technology were classified into three types - basic structure, unified structure, and a new physical structure. When traditional weaving, knitting, and stitching was reinterpreted through 3D printing, there were apparent limitations in reproducing the characteristics of fabric structures due to differences in the materials and structures of traditional textiles. New physical structures are being developed to break away from merely reproducing traditional textile structures, and to bring out the characteristics of 3D printing technology. As examples of new physical structures, there are the kinematics structure which utilizes the hinge method, mesostructure cellular material, and the N12 disk structure. Such techniques potentially open a new paradigm of fashion and textile structures. Some innovative aspects of 3D printing technology may result in changes in the methods of collaboration, manufacturing, and distribution. Designers are receiving help from specialists of various backgrounds to merge 3D printing technology to create original works. Also, 3D printing not only makes personalized custom designs available, but shortens the distribution channels, foretelling a change within the fashion and textile industry.

• Journal of Environmental Science International
• /
• v.29 no.5
• /
• pp.479-494
• /
• 2020

This study analyses the characteristics of volatile organic compounds (VOCs) emissions from the painting and printing facilities, as well as ambient VOCs at industrial complexes in Gwangju. The major components of VOCs emissions from painting facilities were toluene, acetone, 2-butanone, ethyl acetate, ethyl benzene, o-xylene and m,p-xylene. The printing facilities mostly emitted ethyl acetate, 2-butanone, acetone and toluene. Aromatics (49.9%) and oxygenated VOCs (43.6%) were dominant in painting facilities, while oxygenated VOCs (92.7%) were the largest group in printing facilities. The total hydrocarbon concentration (THC) in printing facilities was approximately six times higher than in the painting facilities. The painting and printing facilities use many solvents. Their THC concentrations differed considerably depending on the type of prevention facilities. To reduce THC, it is necessary to improve the prevention facilities and operating conditions. The dominant species of ambient VOCs in industrial complexes were investigated with toluene, ethyl acetate, 2-butanone, ethyl benzene, m,p-xylene, butyl acetate, o-xylene, hexane and acetone. Factor analysis of ambient VOCs showed that the main sources of the VOCs were organic solvents used in painting, coating, and printing, as well as automobile emissions.

• Textile Coloration and Finishing
• /
• v.31 no.4
• /
• pp.233-240
• /
• 2019

Dyeing is an essential process for improving the value of textile products, but it is considered as one of industries causing pollution because of producing wastewater containing hazardous chemicals as well as using a large amount of water and energy. Global demand for greener technologies in textile field is getting much more attention and accordingly, the use of eco-friendly natural dyes is growing much larger. In textile printing, both dyes and pigments can be used. Pigment printing is more simple process and requires less water and less energy, compared to dye printing. In this study, the organic pigment was prepared from the marigold colorant. Samples were stencil printed, pressed(70℃, 3min) and then heat treated(150℃, 5min). The uptake of polyacrylic acid as a chemical binder was the lowest. In particular, marigold pigments were excellent in color and texture when Guar Gum and Sodium Alginate were used as binders. In addition, the light and washing fastness was rated very high as 4, 4/5 grades, and the rubbing fastness was also excellent as 3 and 4 grades.

• 한국태양에너지학회:학술대회논문집
• /
• 2011.04a
• /
• pp.116-120
• /
• 2011

In this paper, we studied the optimization of the screen pringting method for crystalline silicon solar cell fabrication. The 156 * 156 mm2 p-type silicon wafers with $200{\mu}m$ thickness and $0.5-3{\Omega}cm$ resistivity were used after texturing, doping, and passivation. Screen printing method is a common way to make the c-Si solar cell with low-cost and high-efficiency. We studied the optimized condition for screen printing with crystalline silicon solar cell as changing the printing direction (finger line or bus bar), finger width, and mesh angle. As a result, the screen printing with finger line direction showed higher finger height and better conversion efficiency, compared with one with bus bar direction. The experiments with various finger widths and mesh angles were also carried out. The characteristics of solar cells was obtained by measuring light current-voltage, optical microscope and electroluminescence.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.12
• /
• pp.1105-1110
• /
• 2008

In this study, plasma flat fluorescent lamps (FFLs) having two electrode type structures of surface discharge was fabricated by screen printing and were characterized using spectra-radiometer and square pulse power supply. Two types of FFLs (cross-type and line-type electrode structure) were compared with variation of discharge shape and electrode distance.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2010.05a
• /
• pp.17.2-17.2
• /
• 2010

Printed electronics is an emerging technology to realize various microelectronic devices via a cost-effective method. Here we demonstrated a high performance of p-channel and n-channel top-gate/bottom contact polymer field-effect transistors (FETs), and applications to elementary organic complementary inverter and ring oscillator circuits by inkjet processing. We could obtained high field-effect mobility more than $0.4\;cm^2/Vs$ for both of p-channel and n-channel FETs, and successfully measured inkjet-printed polymer inverters. The performance of devices highly depends on the selection of dielectrics, printing condition and device architecture. Optimized CMOS ring oscillators with p-type and n-type polymer transistors showed as high as 50 kHz operation frequency. This research was financially supported by development of next generation RFID technology for item level applications (2008-F052-01) funded by the ministry of knowledge economy (MKE).

• Journal of the Korean Society for Library and Information Science
• /
• v.14
• /
• pp.131-148
• /
• 1987

The Yi-Dynasty published the calendars printed by means of woodblock and typeprinting for the purpose of informing its people of four seasonal changes and appropriate time for farming. The printing types were used to publish the calendars in those days varied depending upon the kinds of the calendars, but all those types are known as only one name: Kwansanggam Type. This is because there have been little studies on the different kinds of printing types. As a result, there are many cases where the libraries make erroneous notes in their catalogues. This study points up the fact that four different kinds of Kwansanggam Type were used depending upon the nature of the calendars. For classification purpose, I call these types Daetongryokja, Naeyongsamsoja, Myongsiryokja, and Chiljongryokja. What has not been revealed in this study can be further explained as the more calendars of those days are found out.

• Journal of Practical Engineering Education
• /
• v.15 no.2
• /
• pp.419-427
• /
• 2023

In this study, optimal adhesion conditions to alleviate defects caused by heat shrinkage with FDM type 3D printers with machine learning are researched. Machine learning is one of the "statistical methods of extracting the law from data" and can be classified as supervised learning, unsupervised learning and reinforcement learning. Among them, a function model for adhesion between the bed and the output is presented using supervised learning specialized for optimization, which can be expected to reduce output defects with FDM type 3D printers by deriving conditions for optimum adhesion between the bed and the output. Machine learning codes prepared using Python generate a function model that predicts the effect of operating variables on adhesion using data obtained through adhesion testing. The adhesion prediction data and verification data have been shown to be very consistent, and the potential of this method is explained by conclusions.

• Journal of the Korean Society for Library and Information Science
• /
• v.15
• /
• pp.267-280
• /
• 1988

After the Koryo government moved to Kanghwado Island to escape the invading Mongols, Ch'oe I who was the government irstman ordered in 1239 the recarving of Nanmingchuan Huoshangsung Chengtao-ko (남명천화상송증도가) widely used by an adherent of Son Buddhism to gain a greater understanding of Son principles. Ch'oe I's postscript indicate that the original edition printed with metal type was no longer available and woodblocks were carved to produce facsimiles of that edition. It is assumed that the copies of the original edition were limited in number due to the primitiveness of printing skills and had either not been taken to Kanghwado Island in the flurry of evacuation or were almost all used up. Demand for the book seemed to have surged sharply due to need for spiritual solace during the period of invasion. It is believed that the original edition of Chengtao-ko was published with metal type in Kaegyong(개경), the capitial, before the government took refuge on Kanghwado Island. Two copies of the recarved woodblocks were recently found in the collectiion of Kim Chong-gyu(김종규). and Park Tong-sop (박동섭). It is presumed that one of the copies was recarved again the other one some time, But the carving of the woodblocks were very sophisticated and faithfully reproduced the characteristics of the original metal type edition; first, there were many slanted characters; second, the lines of the main text were not straight but wavy; third, no bottom stroke of any character overlaps the upper stroke of the following character; and fourth, the characters are relatively uniform in size and shape. The printing techniques reflected in the woodblock reproduction were much better than that at the end of the Koryo dynasty and the beginning of the Yi dynasty. It can be assumed that printing with official type had reached a high level of skill before the transfer to Kanghwado Island.