• 한국구조물진단유지관리공학회 논문집
• /
• 제23권4호
• /
• pp.131-136
• /
• 2019

굳지 않은 콘크리트의 적층성은 콘크리트 3D 프린팅의 핵심 요소로써 필라멘트의 변형 및 붕괴 없이 일정한 높이로 적층하는 성능이다. 적층성은 항복응력과 밀접한 관련이 있으며, 항복응력이 높을수록 우수하다. 또한, 굳지 않은 콘크리트는 압출된 후 시간경과에 따라 경화되면서 전단응력이 증가하기 때문에 적층성이 높아지게 된다. 따라서, 콘크리트 3D 프린팅 시 굳지 않은 콘크리트의 적층성 확보를 위해서는 출력되는 레이어 사이의 적절한 시간 간격(Printing Time Gap, 이하 PTG)이 필요하다. PTG가 증가함에 따라 적층성은 증가하지만, PTG가 과다하게 커지면 출력된 레이어 간의 부착성능이 감소하며, 출력시간이 길어짐에 따라서 압출성능이 저하될 수 있다. 이 연구에서는 100 MPa급 고강도 콘크리트 배합에 적합한 적층성을 확보하기 위하여 PTG를 변수로 한 3D 프린팅 실험을 수행하였으며, 이와 더불어 콘크리트 3D 프린팅 방법을 유사하게 모사할 수 있는 모의 적층실험 방법의 유효성을 검토하기 위하여 모의 적층실험을 수행하였다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 봄 학술논문 발표대회
• /
• pp.249-250
• /
• 2022

PLA 3D printed capsule of FDM method has advantages of mass production and low cost. However, it has a different strength depending on the direction in witch it is laminated. In this paper, structural design of several capsules, FEM analysis, and Compressive strength tests were conducted. As a result, the proposed capsule has a strong load of up to 217.9% compared to general capsule without a reinforcing structure.

• The Journal of Advanced Prosthodontics
• /
• 제11권2호
• /
• pp.95-104
• /
• 2019

PURPOSE. To evaluate the effect of surface treatments and repair materials on the shear bond strength and to measure the fracture toughness of CAD/CAM provisional restoration materials. MATERIALS AND METHODS. Four CAD/CAM (3D printing: Nextdent C&B and ZMD-1000B Temporary, CAD/CAM resin block: Yamahachi PMMA disk and Huge PMMA block) and four conventional (monometacrylate: Jet and Alike, dimetacrylate: Luxatemp and Protemp 4) materials were selected to fabricate disk-shaped specimens and divided into six groups according to surface treatment (n=10). CAD/CAM materials were repaired with Jet or Luxatemp, while conventional materials were repaired with their own materials. The shear bond strength was measured by using universal testing machine. Ten rectangular column-shaped specimens for each material were fabricated to measure the fracture toughness by single edge v notched beam technique. Statistical analysis was performed by one-way ANOVA. RESULTS. The highest shear bond strength of CAD/CAM materials was achieved by SiC paper + sandblasting. It was also accomplished when repairing 3D printing materials with Luxatemp, and repairing CAD/CAM resin blocks with Jet. Yamahachi PMMA disk showed the highest fracture toughness. Nextdent C&B showed the lowest fracture toughness value but no statistically significant difference from Alike and Luxatemp (P>.05). CONCLUSION. In order to successfully repair the CAD/CAM provisional restoration, mechanical surface treatment and appropriate repair material according to the CAD/CAM material type should be selected. The CAD/CAM provisional materials have proper mechanical properties for clinical use as compared to conventional materials.

• 산업식품공학
• /
• 제21권3호
• /
• pp.233-241
• /
• 2017

Scaffolds of cell substrates are biophysical platforms for cell attachment, proliferation, and differentiation. They ultimately play a leading-edge role in the regeneration of tissues. Recent studies have shown the potential of bioactive scaffolds (i.e., osteo-inductive) through 3D printing. In this study, rice bran-derived biocomposite was fabricated for fused deposition modeling (FDM)-based 3D printing as a potential bone-graft analogue. Rice bran by-product was blended with poly caprolactone (PCL), a synthetic commercial biodegradable polymer. An extruder with extrusion process molding was adopted to manufacture the newly blended "green material." Processing conditions affected the performance of these blends. Bio-filament composite was characterized using field emission scanning electron microscopy (FE-SEM) and energy dispersive X-ray spectroscopy (EDX). Mechanical characterization of bio-filament composite was carried out to determine stress-strain and compressive strength. Biological behaviors of bio-filament composites were also investigated by assessing cell cytotoxicity and water contact angle. EDX results of bio-filament composites indicated the presence of organic compounds. These bio-filament composites were found to have higher tensile strength than conventional PCL filament. They exhibited positive response in cytotoxicity. Biological analysis revealed better compatibility of r-PCL with rice bran. Such rice bran blended bio-filament composite was found to have higher elongation and strength compared to control PCL.

• 한국BIM학회 논문집
• /
• 제7권3호
• /
• pp.1-10
• /
• 2017

3D concrete printing technology builds structural components layer-by-layer with concrete extruded through a nozzle without using forms. This technology can simplify construction processes by optimizing design flexibility, construction time, and cost. Furthermore, the 3D printing technology is easy to make an irregularly shaped and function embedded building(or object) which is difficult to be constructed by conventional construction method. However, the 3D printing concrete is not suitable for current commercial standard and the material itself. It is also difficult to apply it to the construction site due to the lack of initial strength and the nozzle which is clogged during the process. The research of mix proportion design process for 3D printing concrete which differs from the conventional concrete is necessary in order to solve the problems. This paper aims to calculate the 3D printing concrete mix proportion design process based on the mix materials and performance information derived from the previous researches. Therefore, the usage variation range, mutual influence relationship, and the importance priority of the mix proportion are analyzed. Based on this results, the basic design process of 3D printing concrete which contains planning design phase, basic design phase and validating performance phase is suggested. We anticipate to confirm applicability verification about the actual production by referring to this 3D printing concrete mix proportion study. In the future, this study can be utilized for blueprint of the 3D printing concrete mix proportion.

• 한국의상디자인학회지
• /
• 제17권2호
• /
• pp.125-143
• /
• 2015

This study has investigated the status of utilizing 3D printing in fashion field in order to keep up with the trend for 3D printing technology to be realized in all industries so that the materials and the modeling modes may be figured out. The following is the findings. The materials used most in 3D printing in fashion field are PA, PLA, TPU, multi-material, ABS and metal. PA, TPU and Multi-material have so much excellent flexibility and strength that they are widely used for garment, shoes and such fashion items as bags. But PLA, ABS and metal are scarcely used for garment because PLA is easily biodegradable in the air, ABS generates harmful gas in the process of manufacture and metal is not flexible, while all of these three are partly used for shoes and accessories. The modeling modes mainly applied for 3D printing in fashion field are SLS, SLA, FDM and Polyjet. SLS, which is of a powder-spraying method, is used for making 3D textile seen just like knitting. Polyjet method, which has higher accuracy and excellent flexibility, can be used for expressing diverse colors, and accordingly it is used a lot for high-quality garment, while SLA and FDM method are found to be mostly used for manufacturing shoes and accessories rather than for making garment because they are easily shrunk to result in deformation.

• 한국기계가공학회지
• /
• 제16권6호
• /
• pp.101-108
• /
• 2017

Recently, the patent rights for 3D printing technology have expired, while 3D printers with RP (Rapid Prototyping or Additive Manufacturing) and 3D printing technologies are receiving attention. In particular, the development of 3D printers is rapid in Korea, thanks to the increasing sales and popularity of FDM (Fused Deposition Modeling or Fused Filament Fabrication) 3D printers. However, the quality and productivity of the FDM 3D Printer are not good, so customers prefer the DLP (Digital Light Processing) method to avoid these shortcomings. The DLP method has high quality and productivity. However, because of the stereolithography equipment, it has few studies compared to optimal values for elements then FDM 3D printing study. In this study, to find the optimal conditions for 3D printing with the DLP method, the aim is to obtain the optimal values (strength, final time, quality) by changing the light exposure time, layer thickness, and z-axis speed.

• Elastomers and Composites
• /
• 제55권1호
• /
• pp.46-50
• /
• 2020

Material extrusion (ME)-type 3D printing is the most popular among the 3D printing processes. In this study, the cross-section morphologies of ME-type 3D printing manufactured specimens were observed with respect to the thermal properties of the material. The cross-section morphology of a specimen is related to the deposition strength, and the outside profile of the cross-section is related to the surface roughness. The filaments used in this study, with different thermal conductivities, were the acrylonitrile-butadiene-styrene (ABS), the high impact polystyrene (HIPS), the glycol-modified polyethylene terephthalate (PETG), and the polylactic acid (PLA). The cross-sections and the surfaces of the 3D manufactured specimens were examined. In ME-type 3D printing, the filaments are extruded through a nozzle and they form a layer. These layers rapidly solidify and as a result, they become a product. The thermal conductivity of the material influences the cooling and solidification of the layers, and subsequently the cross-section morphology and the surface roughness.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.256-257
• /
• 2006

3D printing of NiTi alloys has been successfully achieved. A novel printing process has been developed and used, which consists in selective deposition of a solvent on a granule bed. The granules are composed of metal powders and thermoplastic binder, which are mixed and sieved by conventional methods. A sound green strength is obtained after solvent evaporation. Sintered parts exhibit good density, proper phase composition and shape memory behaviour.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 봄 학술논문 발표대회
• /
• pp.188-189
• /
• 2022

With the development of nano-reinforcement technology, TiO₂ nanomaterials have received widespread attention as one of the additives without pozzolanic reaction, which can be used to improve the mechanical properties of cement-based materials. Meanwhile, with the development of additive manufacturing technology or known as 3D printing technology, its application in the construction field has also got noticed. Therefore, in this work, the effect of three sizes of TiO₂ on the compressive strength of hardened cement-based materials fabricated by binder jetting 3d printing was evaluated. According to the results, the TiO₂ particles with larger sizes can provide better reinforcement to the hardened cement due to its more significant filling effect.