• Journal of the Korea Society of Computer and Information
• /
• v.17 no.6
• /
• pp.173-182
• /
• 2012

A recent advance in smart phones is increasing utilization of location information. Existing positioning system was using GPS location for positioning. However, the GPS cannot be used indoors, if GPS location has an incorrectly problem. In order to solve indoor positioning problems of indoor location-based positioning techniques have been investigated. There are a variety of techniques based on indoor positioning techniques like as RFID, UWB, WLAN, etc. But WLAN location positioning techniques take advantage the bond in real life. WLAN indoor positioning techniques have a two kind of method that is centroid and fingerprint method. Among them, the fingerprint technique is commonly used because of the high accuracy. In order to use fingerprinting techniques make a WLAN signal map building that is need to lot of resource. In this paper, we try to solve this problem in an Indoor environment for WLAN-based fingerprint of a virtual building technique, which is proposed. Proposed technique is classified Cell environment in existed Indoor environment, all of fingerprint points are shown virtual grid map in each Cell. Its method can make fingerprint grid map very quickly using estimate virtual signal value. Also built signal value can take different value depending of the real estimate value. To solve this problem using a calibration technique for the Splite-tree is proposed. Through calibration technique that improves the accuracy for short period of time. It also is improved overall accuracy using predicted value of around position in cell.

• Journal of the Korean Arthroscopy Society
• /
• v.13 no.2
• /
• pp.179-182
• /
• 2009

Purpose: Point fixation at the margin of the glenoid is a limitation of conventional arthroscopic stabilization using suture anchors, and does not afford sufficient footprint healing, especially in glenoid bone deficiency. So, we introduce an arthroscopic suture bridge transosseous-equivalent technique for bony Bankart lesions to avoid the technical disadvantage of point contact with anchor fixation and to improve mechanical stability through cross compression of the labrum. Surgical approach: The technique was adapted from the transosseous-equivalent rotator cuff repair technique using suture bridges, which improved the pressurized contact area and mean pressure between the tendon and footprint. After preparation of the glenoid bed by removal, reshaping, or mobilization of the bony lesion, two anchors (3.0 mm Biofastak, $Arthrex^{(R)}$, Naples, FL) were inserted into the superior and inferior portion of the bony Bankart lesion. Using a suture hook, medial mattress sutures were applied around the capsulolabral portion of the IGHL complex to obtain sufficient depth of glenoid coverage. A 3.5 mm pushloc anchor ($Arthrex^{(R)}$, Naples, FL) hole was made in the articular edge of the anterior glenoid rim. distal, suture bridge was applied, and proximal was inserted to mobilize the labrum in the proximal direction. This avoided the technical disadvantage of point contact with anchor fixation and decreased the level of gap formation through cross-compression of the labrum.

• The Journal of the Korea Contents Association
• /
• v.17 no.11
• /
• pp.221-228
• /
• 2017

This paper aimed to find out the eco-friendly approach enabling to directly print patterns and dye colors on fabrics using leaves of plants. In the research process, I found out the 'eco-printing' which could effectively express unique colors and patterns of plants. While eco-printing can design the patterns and colors of plants in nature using the leaves of plant(Eucalyptus), it is difficult to implement because it is not systematically and academically investigated including the dictionary definition in Korea until now. Thus, I tried to define the eco-printing and natural dyeing using leaves or flowers of plants enabling to get natural patterns and colors and do the experimental research and production using the leaves of Eucalyptus. The leaves of Eucalyptus were arranged on a wool scarf and a silk scarf, tied and applied pressure to them and made pigments penetrate into fabrics by heating or steaming them. This approach is to directly print the patterns using the shapes of plants on fabrics unlike the existing approaches dyeing by extracting dyeing solution from natural materials. Furthermore, the change of colors was attempted by using the color fixers. In accordance with the results of this experimental research, the scarf design differentiated from the existing products could be acquired. It was identified that eco-printing could induce the color variables depending on the conditions of each material and environment. For improving the color variables, various kinds of fabrics and divers kinds of materials which can be easily acquired in a daily life will be investigated and compared. Furthermore, it is expected that the experimental research and production techniques on eco-printing be utilized when starting natural dyeing and the scope of natural dyeing be more expanded.

• Clean Technology
• /
• v.22 no.4
• /
• pp.232-240
• /
• 2016

Recently, various research studies have been conducted and many are in progress for the suitable alternative materials for ITO based touch screen panel (TSP) due to limitations in size and flexibility. Various researches from all over the world have been attempted to fabricate the fine electrode less than $5{\mu}m$ for the rapid developing of display technology. Research is also being carried out in metal mesh methods using the existing technologies and alternative materials at commercial level. However, by using the existing technologies certain discrepancies are observed like low transparency and low yield which also results in the distortion of patterns. For repairing the damaged pattern, the conventional laser CVD technique has also been used but there are some challenges observed in CVD technique like achieving a stable fine electrode of $10{\mu}m$ or less and avoiding the formation of satellite drops. To overcome these issues, a new printing process named Electrohydrodynamic (EHD) printing, has been introduced by which $5{\mu}m$ fine patterns can be printed in one step. This EHDA printing technique has been applied to print very fine electrodes of $5{\mu}m$ or less by using conductive inks of various viscosities. This study also presents the optimized process parameters for printing $5{\mu}m$ fine electrode patterns during experiments by controlling the applied voltage and supply flow rate. The $5{\mu}m$ repair electrodes were fabricated for repairing $50{\mu}m$ shorted electrode samples.

• Proceedings of the Korean Printing Society Conference
• /
• 2001.06a
• /
• pp.63-77
• /
• 2001

PDF(Portable Document Format) is a file format that Adobe advances postscritp technique and use in managing document information or electric publishing(internet, CD-ROM, DVD). PDF is a devised document type for being able to read and print anywhere, independent of OS, printer type, resolution, and the kind of computer etc. Because this includes a compressing function, it transfers document through a small size of file in internet or intranet. In addition, that is a file format has various advantages-sharing of information and transfering documents in on line or off line environment. In this paper, we developed electronic document system using PDF format. Electronic document system consists of filter, automatic indexing, special searching system and web server. The information used in this paper is database made using Zwon\`s DocuCom. The filter recognizes various kinds of document structure. And according to property of document, it produces ASCII output. In addition to processing various formats of document, the filter can extract keywords in documents of MS WORD, Excel, Powerpoint, PDF, CAD etc. This filter uses the structure of window printer drive and can extract the information for text, page, font type and size from relevant document. The automatic indexing recognizes the formatted tag of document form ASCII text produced by filter and extracts adequate keyword to structure and property of document. PDF electronic document systems proposed in this paper can be used in Internet, PC communication. Users can choose and read electronic documents by two ways. First, users can choose and read relevant books using PDF electronic document homepage. Second, users can use PDF integrated-search system. User can search after inputing keyword and choose reference field and type of data. But, now, PDF products of Adobe can\`t support the Korean character. If this problem is resolved, we thick that PDF applications system looks active. Although there is limited function in case of using Zwon DocuCom used in this study, we think that there isn\`t a great deal of difficulty in electronic document and building digital database.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• v.4B no.2
• /
• pp.86-91
• /
• 2004

PV power generation, which directly converts solar radiation into electricity, contains numerous significant advantages. It is inexhaustible and pollution-free, silent, contains no rotating parts, and has size-independent electricity conversion efficiency. The positive environmental effect of photovoltaics is that it replaces the more polluting methods of electricity generation or that it provides electricity where none was available before. This paper highlights a novel simple method to abstract the entire parameters of the solar cell. In development, design and operation of PV power generation systems, a technique for constructing V-I curves under different levels of solar irradiance and cell temperature conditions using basic characteristic values of the PV module is required. Everyone who has performed manual acquisition and analysis of solar cell I versus V data would agree that the job is tedious and time-consuming. A better alternative is to use an automated curve tracer to print out the I versus V curves and compute the four major parameters; $V_{oc}$, $I_{sc}$, FF, and . Generally, the V-I curve tracer indicates only the commonly used solar cell parameters. However, with the conventional V-I curve tracer it is almost impossible to abstract the more detailed parameters of the solar cell; A, $R_{s}$ and $R_{sh}$ , which satisfies the user, who aims at the analysis of the development of the PV power generation system, that being advanced simulation. In this paper, the proposed method provides us with satisfactory results to enable us to abstract the detailed parameters of the solar cell; A, $R_s$ and $R_{sh}$.>.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.2
• /
• pp.271-281
• /
• 2002

Currently, most web designers guarante high quality using bitmap graphics as fixed font size, but that has defects about file size and flexibility. Especially, to provide high quality of banner and advertise characters, after you should use a bitmap edit program, and then we should follow the method we add that program to HTML documents as bitmap data. In this study, as I show a couple of new tags in front of HTML documents, I show methods which can be presented diverse effects. When text information are stored, because we print out a screen with simple control points and outside information, it can be possible for us to express the same quality of Hangul characters like printed documents in a web browser. Regardless of the second class of platform, we can make it possible the character expression with exact character expressions and diverse effects.

• Journal of the Korean Society of Costume
• /
• v.50 no.2
• /
• pp.167-182
• /
• 2000

The purpose of this study is to examine the art nouveau fashion represented in the end of the twentieth century. The characteristics of art nouveau are naturalism, medievalism , exoticism, and decadentism. The influences of art nouveau were seen in the fashion of the late nineteenth century : S-curve silhouette and organic curve motives printed on hems. Art nouveau has reappeared in modern fashion trends such as romanticism , decadence, ecology, ethno, and fusion. To sum up, art nouveau fashion at the end of the twentieth century is classified into four shapes. First, art nouveau appears in naturalism. Influenced by the arts and crafts movements and naturalistic trend, it has reappeared at the end of the twentieth century in themes like 'art & craft'. This expression technique is to objectively nature and to represented art nouveau textiles. Second, S-curve silhouette appeared at the end of nineteenth century's fashion with the art nouveau influenced rejection of the bustle style. At the end of the twentieth century, the design , emphasizing the hip, is represented in fashion collections as a phenomenon of romanticism . Especially the art nouveau silhouette of the end of the twentieth century does not represent S-curve silhouette. But , it emphasizes the hip only. Third, Art nouveau exoticism by symbolism is influenced by Chinese and Celtic art, the Middle Ages, and the exoticism that appeared in fashion at the end of the nineteenth century : harem style, kimono style, and turbans. Exoticism at the end of the twentieth century is expressed by optical flower prints and successive floral print arrangements as seen in the themes of ethno and fusion. Fourth, one of the characteristics of art nouveau, decadence is influenced by the pre-raphaelite brotherhood. This is expressed in the images of vampires, and symbolism expressing grotesque insect motives and decadent successive curves. At the end of the twentieth century decadence is represented in fashion ; grotesque insect motives, tatto looks of organic curve motives celtic hair style, see-through fashion, grotesque make-up . Besides hair style techniques, decadent expressions applying art nouveau paintings also appeared. Finally , art nouveau fashion represented as a fashion trend at the turning point to the new millennium is one of great significance as an organic, an environment-intimate and continuance-possible design in a future.

• Proceedings of the KIEE Conference
• /
• 2002.11d
• /
• pp.197-199
• /
• 2002

The invention of VHDL(Very High Speed Integrated Circuit Hardware Description Language), Technical language of Hardware, is a kind of turning point in digital circuit designing, which is being more and more complicated and integrated. Because of its excellency in expression ability of hardware, VHDL is not only used in designing Hardware but also in simulation for verification, and in exchange and conservation, composition of the data of designs, and in many other ways. Especially, It is very important that VHDL is a Technical language of Hardware standardized by IEEE, intenational body with an authority. The biggest problem in modern circuit designing can be pointed out in two way. One is a problem how to process the rapidly being complicated circuit complexity. The other is minimizing the period of designing and manufacturing to survive in a cutthroat competition. To promote the use of VHDL, more than a simple use of simulation by VHDL, it is requested to use VHDL in composing logical circuit with chip manufacturing. And, by developing the quality of designing technique, it can contribute for development in domestic industry related to ASIC designing. In this paper in designing SMPS(Switching mode power supply), programming PWM by VHDL, it can print static voltage by the variable load, connect computer to chip with byteblaster, and download in Max(EPM7064SLCS4 - 5)chip of ALTER. To achieve this, it is supposed to use VHDL in modeling, simulating, compositing logic and product of the FPGA chip. Despite its limit in size and operating speed caused by the specific property of FPGA chip, it can be said that this method should be introduced more aggressively because of its prompt realization after designing.

• Korean Journal of Materials Research
• /
• v.19 no.8
• /
• pp.437-442
• /
• 2009

This paper describes an improved strategy for controlling the adhesion force using both the antiadhesion and adhesion layers for a successful large-area transfer process. An MPTMS (3-mercaptopropyltrimethoxysilane) monolayer as an adhesion layer for Au/Pd thin films was deposited on Si substrates by vapor self assembly monolayer (VSAM) method. Contact angle, surface energy, film thickness, friction force, and roughness were considered for finding the optimized conditions. The sputtered Au/Pd ($\sim$17 nm) layer on the PDMS stamp without the anti-adhesion layer showed poor transfer results due to the high adhesion between sputtered Au/Pd and PDMS. In order to reduce the adhesion between Au/Pd and PDMS, an anti-adhesion monolayer was coated on the PDMS stamp using FOTS (perfluorooctyltrichlorosilane) after $O_2$ plasma treatment. The transfer process with the anti-adhesion layer gave good transfer results over a large area (20 mm $\times$ 20 mm) without pattern loss or distortion. To investigate the applied pressure effect, the PDMS stamp was sandwiched after 90$^{\circ}$ rotation on the MPTMS-coated patterned Si substrate with 1-${\mu}m$ depth. The sputtered Au/Pd was transferred onto the contact area, making square metal patterns on the top of the patterned Si structures. Applying low pressure helped to remove voids and to make conformal contact; however, high pressure yielded irregular transfer results due to PDMS stamp deformation. One of key parameters to success of this transfer process is the controllability of the adhesion force between the stamp and the target substrate. This technique offers high reliability during the transfer process, which suggests a potential building method for future functional structures.