• 설비공학논문집
• /
• 제15권10호
• /
• pp.809-820
• /
• 2003

The present study investigates effects of flow velocity on the convective heat/mass transfer characteristics in wavy ducts of a primary surface heat exchanger application. Local heat/mass transfer coefficients on the wavy duct sidewall are determined by using a naphthalene sublimation technique. The flow visualization technique is used to understand the overall flow structures inside the duct. The aspect ratio and corrugation angle of the wavy duct is fixed at 7.3 and 145$^{\circ}$ respectively, and the Reynolds numbers, based on the duct hydraulic diameter, vary from 100 to 5,000. The results show that there exist complex secondary flows and transfer processes resulting in non-uniform distributions of the heat/mass transfer coefficients on the duct side walls. At low Re (Re<1000), relatively high heat/mass transfer regions like cell shape appear on both pressure and suction side wall due to the secondary vortex flows called Taylor-Gortler vortices perpendicular to the main flow direction. However, at high Re (Re>1000), these secondary flow cells disappear and boundary layer type flow characteristics are observed on pressure side wall and high heat/mass transfer region by the flow reattachment appears on the suction side wall. The average heat/mass transfer coefficients are higher than those of the smooth circular duct due to the secondary flows inside wavy duct. And also friction factors are about two times greater than those of the smooth circular duct.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.660-663
• /
• 2004

Recently in the automotive industries, light and high quality material is strongly required because of emissions regulation issues. In the electromagnetic stirring process, it has many merits that are the exact control ability about material processing and a good point of the protection of environment. In this paper, the morphology of the change of primary Al phase in A356 alloy by electro magnetic stirrer was investigated to obtain the globular structure. The parameters are the current, stirring time, pouring temperature and cooling rate of different wall thickness; 5mm, 15mm, 25mm respectively. By proper selection of the processing parameters, globular primary particles can be obtained by electromagnetic stirrer.

• 한국실내디자인학회:학술대회논문집
• /
• 한국실내디자인학회 2006년도 춘계학술발표대회 논문집
• /
• pp.63-64
• /
• 2006

The design concept of this dental clinic Interior design is emotional color expression for the medical facility. This dental clinic is showing off the new adoption of the Korean primary traditional color pallette for the medical interior design. The graphic wall of the corridor is strongly attracting the eyes of customers while wrapping the corridor wall and partition with rather unconventional primary colored graphic shaping a tooth. Also the vivid and the dynamic atmosphere are emphasized by using the red color in the treatment area and the powder room. For the space programing, I focused on the functionality of each space and the efficiency of the traffic line. Centering around the information desk, the principal traffic line Is divided Into the staffs' private movement and the public movement.

• 대한방사선치료학회지
• /
• 제2권1호
• /
• pp.31-40
• /
• 1987

In the case of designing a high dose rate remote controlled afterloading treatment room with existing hospital facilities. We must construct the effective protective barriers so as to reduce the primary and scattered radiation up to the maximum permissible dose level. It is difficult to reinforce the barrier thickness of the shielding requirements because of the limited space and the problem of the existing building structure at the surrounding area. Therefore we can reduce the intensity of primary radiation to the required degree at the location of interest with installing the appropriate I shaped Pb barriers between the radiation source and the shielding wall of the concrete. As a result, it was possible to reduce the intensity of the primary radiation below the M.P.D level by using additional Pb barriers instead of increasing thickness of concrete wall.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2010년 춘계학술대회논문집
• /
• pp.352-357
• /
• 2010

A parametric study has been carried out to elucidate the characteristics of channel flow with a streamwise-periodic array of cylinders. This flow configuration is relevant to heat exchanger applications. The presence of cylinders in channel flow causes the attached wall boundary layer to separate, leading to significant change in flow instabilities. There exist two kinds of instabilities; flow undergoes a primary instability (Hopf bifurcaiton) at a lower Reynolds number, and the unsteady two-dimensional flow becomes unstable to three-dimensional disturbances at a higher Reynolds number. We report here the dependencies of the primary instability as well as the flow characteristics of the subsequent unsteady flow including flow-induced forces and Strouhal number of vortex shedding, on the distance between the cylinder and the channel wall.

• 대한소아치과학회지
• /
• 제34권1호
• /
• pp.62-72
• /
• 2007

이번 실험에서는 중합수축 응력이 가장 크게 나타나는 유구치 I급 와동에서 와동벽의 위치와 중합광원의 변화에 의해 다르게 나타나는 응력의 차이를 microtensile bond strength (MTBS)를 이용하여 알아보는 것을 목적으로 하였다. 교합면 법랑질을 제거한 하악 제 2유구치 30개를 준비하여 I급 와동을 형성하였다. 제조사의 지시에 따라 상아질 접착제를 도포 후 3가지 중합광원: 할로겐 램프, 플라즈마, 발광다이오드를 이용하여 10개씩 광중합하였다. 복합레진을 한꺼번에 충전 후 각각의 중합기로 광중합하였다. 동일 치아에서 각각 치수벽과 축벽의 MTBS 측정용 시편을 제작하고 각 군을 중합광원과 와동벽 위치에 따라 할로겐 램프 - 축벽군, 할로겐 램프 - 치수벽군, 플라즈마 - 축벽군, 플라즈마 - 치수벽군, 발광다이오드 - 축벽군, 발광다이오드-치수벽군의 6개 군으로 분류하였다. 만능시험기에서 MTBS를 측정하고 파절편과 와동의 단면을 SEM을 이용하여 관찰하였다. 동일 중합광원에서 와동벽 간 비교는 T-test, 동일 와동벽에서 중합광원 간 비교는 One-way ANOVA와 Tukey's post hoc test를 이용하였고 Weibull 분포분석을 하였다. 동일 중합광원 군간 비교에서 모두 치수벽 시편의 접착강도가 축벽 시편에 비해 유의하게 높았으며 동일 와동벽 군간 비교에서 모두 중합광원에 따른 접착강도가 유의한 차이를 보이지 않았다. 축벽 시편이 치수벽 시편보다 낮은 Weibull 변수(m)를 나타내었고 SEM 관찰 결과 축벽 시편에서 보다 더 불균일한 접착이 이루어진 것을 알 수 있었다.

• Journal of Chest Surgery
• /
• 제24권8호
• /
• pp.802-806
• /
• 1991

Primary neoplasms of the ribs and sternum are rare. Most primary bony chest wall neoplasms are malignant, and chondrosarcoma is the most common malignancy in this location The etiology of chondrosarcoma is unknown. Definitive diagnosis of chondrosarcoma can only be made pathologically. The natural history of chest wall chondrosarcoma is one of slow growth and local recurrence. Most tumors of the sternum require wide resection and reconstruction procedures, with potentially serious postoperative problems. Advances in chest wall reconstruction primarily through refinement in muscle transposition and clarification of the functional anatomy and blood supply of trunk muscles, has resulted in a more aggressive resection of the these tumors . Recently we experienced a case with chondrosarcoma of the sternum. A 56 year-old man was admitted to our hospital due to painless, slowly enlarging mass at the left sternoclavicular junctional area. The chest radiograph strongly suggested an underlying cartilaginous neoplasm owing to the appearance of typical flocculent and curvilinear calcifications within the lesion. On CT of the chest, the tumor exhibited a scalloped or lobulated contour, hypodensity of the nonmineralized component in comparison to adjacent muscle, and characteristic stippled cartilaginous matrix mineralization, also typical for cartilaginous neoplasm. The patient underwent wide resection of the chest wall tumor include with a 2-3cm margin of normal tissue on all sides and the thoracic skeletal defect was reconstructed with polytetrafluoroethylene [Gore-Tex] soft-tissue patch. Soft tissue reconstructive procedure was done with the pectoralis major muscle transposition. The patient had an uneventful postoperative course and discharged without adjuvant treatment such as radiation and chemotherapy.

• 설비공학논문집
• /
• 제11권1호
• /
• pp.18-30
• /
• 1999

A heat transfer analysis for the two-dimensional (2-D) steady state using finite difference method (FDM) is performed to predict the thermal behavior of the primary first-wall (FW) system of fusion reactor under various geometric and thermo-hydraulic conditions, such as the beryllium (Be) armor thickness, pitch of cooling tube, and coolant velocity. The FW consists of authentic steel (type 316 stainless steel solution annealed) for cooling tubes, Cu for cooling tubes embedding material, and Be for a protective armor, based on the International Thermonuclear Experiment Reactor (ITER) report. The present 2-D analysis, the control volume discretized with hybrid grid (rectangular grid and polar grid) and Gauss-Seidel iteration method are adapted to solve the governing equations. In the present study, geometric and thermo-hydraulic parameters are optimized with consideration of several limitations. Consequently, it is suggested that the adequate pitch of cooling tube is 22-32mm, the beryllium armor thickness is 10-12mm, and that the coolant velocity is 4.5m/s-6m/s for $100^{\circ}C$ of inlet coolant temperature. The cooling tube should locate near beryllium armor. But, it would be better for locating the center of Cu wall, considering problems of material and manufacturing. Also, 2-D analysis neglecting the axial temperature distribution of cooling tube is appropriate, regarding the discretization error in axial direction.

• Journal of Chest Surgery
• /
• 제15권1호
• /
• pp.12-14
• /
• 1982

21 cases of the chest wall tumors that were operated and proved by pathologically at the dept. of thoracic & cardlovascular surgery, SNUH during 16 years from 1965 to 1981 were reviewed. The results are as follows: 1.Benign tumors were 11 cases. Primary malignant tumors were 7 cases. Metastatic tumors were 3 cases. 2.Incidence rate of male to female was 1.5:1. 3.Main symptoms were palpable mass [52.4%] and localized chest pain [14.3%]. 4.Locations of tumors were rib [61.9%], soft tissues and muscle [33.3%] and sternum [4.8%]. We excluded the Tbc, rib carles from the chest wall tumors.

• Geomechanics and Engineering
• /
• 제2권2호
• /
• pp.71-88
• /
• 2010

Soil nailing technique is being widely used for stabilization of vertical cuts because of its economic, environment friendly and speedy construction. Global stability and lateral displacement are the two important stability criteria for the soil nail walls. The primary objective of the present study is to evaluate soil nail wall stability criteria under the influence of in-situ soil variability. Finite element based numerical experiments are performed in accordance with the methodology of $2^3$ factorial design of experiments. Based on the analysis of the observations from numerical experiments, two regression models are developed, and used for reliability analyses of global stability and lateral displacement of the soil nail wall. A 10 m high prototype soil nail wall is considered for better understanding and to highlight the practical implications of the present study. Based on the study, lateral displacements beyond 0.10% of vertical wall height and variability of in-situ soil parameters are found to be critical from the stability criteria considerations of the soil nail wall.