• Journal of Astronomy and Space Sciences
• /
• 제5권1호
• /
• pp.57-72
• /
• 1988

The long-term observational properties of the photometric behaviors of the short period(p=0.48 day) eclipsing binary system XY UMa are discussed. They are based on the UBV observatins, which were carried out by Geyer in the yaers 1955-1961, 1968, 1975-1984. Light curves of XY UMa revealed very large changes not only between consecutive observing nights, but also from season to season. Between 1955 and 1984, the mean system brightness increased about 30% during this time interfvals, meanwhile, the orbital period of this system was constant whithin 1.6% of its period. The colour index curve shows similar variations like the light curve but with a phase offset oscillation around the time instants of the primary minama. Observational evidence for photospheric and chromospheric activities on the XY Uma are also discussed.

• 한국인쇄학회지
• /
• 제2권1호
• /
• pp.1-21
• /
• 1984

Reproduced colors which are half-tone dot printed at the rate of 10, 20, 30, 100% half-tone dot area by each process ink-cyan, magenta and yellow ant at the rate of 10, 20, 30, 100% by the mean color mixing of black, cyan, magenta and yellow, are colorimetric analyzed by make use of the 1931 CIE XYZ system of color specification and matching the Munsell color system. With increased half-tone areas, 1. Yellow has ideal reflectance curve, but magneta has nonideal reflectance curve. 2. Yellow and cyan have almost standard dominant wavelengths but magenta has complementary wavelengths. 3. Yellow has higher excitation purities in primary colors, but low excitation purities in secondary and third colors. 4. Value function is decreased and generally the range of value function in chromaticity diafgram is extented. 5. The properties of black and CMY printed materials have not equality, therefore black process ink is necessery in half-tone printing process.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제7권
• /
• pp.79-90
• /
• 1999

This investigation presents the experimental results of forced convection boiling heat transfer around a circular, electrically heated horizontal cylinder to subcooled water in cross flow. In these experiments, the following primary variables were included: heat flux, flow velocity, pressure and degree of subcooling at inlet. Local surface temperatures were measured at nine peripheral positions. Local surface temperature distributions are classified into four categories depending on the supplied heat flux. The effects of the boiling curve depending on the fluid velocity, degree of subcooling at inlet and pressure are presented.

• Korean Journal of Hydrosciences
• /
• 제3권
• /
• pp.81-96
• /
• 1992

This study represents the methodology for feasibility analysis of small hydro power SHP plant. Cumulative density function of Weibull distribution and Thiessen method were adopted to decide flow duration curve at SHP candidate site. The perfomance prediction model and construction cost estimation model for tunnel-type SHP plant were developed. Eight tunnel -type SHP candidate sites existing on Han-river were selected and surveyed for actual site reconnaissance. The performance characteristics and economical feasibility for these sites were analyzed by using developed models. As a result, it was found that the optimum design flowrate with the lowest unit generation cost for tunel-type SHP candidate site were the flowrate concerming with between 20% and 30% of time ratio on the flow duration curve. Additionally, primary design specifications such as design flowrate, effective head, capacity, annual averageload factor, annual electricity production were estimated and discussed for eight surveyed SHP candidate sites.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.131-136
• /
• 2003

CF8M cast austenitic stainless steel is used for several components such as primary coolant piping, elbow, pump casing, and valve bodies in light water reactors. These components are subject to thermal aging at the reactor operating temperature. Thermal aging results in spinodal decomposition of the delta-ferrite leading to increased strength and decreased toughness. In this study, three kinds of the aged CF8M specimen were prepared using an artificially simulated aging method. The objective of this study is to summarize the method of estimating ferrite contents, Charpy impact energy and J-R curve, and to evaluate the thermal embrittlement of the CF8M cast austenitic stainless steel piping used in the domestic nuclear power plants.

• 설비공학논문집
• /
• 제10권5호
• /
• pp.558-568
• /
• 1998

This paper presents the results of experiments involving external forced convection on boiling heat transfer from electrically heated horizontal tube to water in cross flow. In these experiments, all of the following primary variables were varied: heat flux, cross flow velocity, pressure and degree of subcooling. Local surface temperatures were measured at nine peripheral positions. Surface temperature distributions are classified into four groups as a function of heat flux. The characteristics of the boiling curve at different velocity, degree of subcooling and pressure are examined.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.96-101
• /
• 2004

Cast austenitic stainless steel is used for several components, such as primary coolant piping, elbow, pump casing and valve bodies in light water reactors. These components are subject to thermal embrittlement at the reactor operating temperature. The objective of this study is to summarize the method of estimating ferrite content, Charpy impact energy and J-R curve and to evaluate the thermal embrittlement of the cast austenitic stainless steel piping used in the domestic nuclear power plants. The result of evaluation, two domestic nuclear power plants used CF-8M and CF-8A material has adequate fracture toughness after saturation.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제50권9호
• /
• pp.447-453
• /
• 2001

In this paper, a new auto-focusing algorithm for digital cameras is proposed. One of the primary concerns of digital image processing is to increase image quality, and the most important factor for degrading the images is the blurring effect due to inexact focusing. The blurring effect occurs when the focusing lens is located on an unsuitable position. Therefore, focusing on an object should be proceeded before acquiring images. The proposed auto-focusing algorithm is MMDT(min-max difference threshold), and the performance of the proposed algorithm is evaluated by the use of the focus curve. It is shown that the proposed algorithm is superior to other previous auto-focusing algorithms in both the focus shape and computation time aspects. Especially, the improvement of the focus curve shape in both monotonousness and slope indicates that focusing can be done rapidly in comparison with other previous proposed algorithms.

• 한국진공학회지
• /
• 제10권1호
• /
• pp.31-36
• /
• 2001

열산화시킨 $SiO_2$ 박막의 두께와 입사 전류의 양에 따라 이차전자 방출 계수를 측정하였다. $930^{\circ}C$에서 열산화시킨 $SiO_2$ 박막 두께는 58nm, 19nm, 43nm, 79nm, 95nm, 114nm였으며 이들의 이차전자의 방출 특성이 박막 두께와 전류량에 따라 변화하는 것을 확인하였다. 박막 두께 43 nm 이하의 얇은 박막에서는 대체적으로 universal curve의 형태를 따르지만 79 nm 이상의 두꺼운 박막에서는 이차전자 방출곡선이 최고점이 2개인 형태로 변하며 그 값도 전반적으로 낮아진다. 또 입사시키는 일차전자 전류의 증가에 대해서도 이차전자 방출곡선이 전체적으로 낮아진다. 이 실험에서 측정된 최대 이차전자 방출 계수는 박막 두께 19 nm, 일차 전자 에너지 300 eV 일차 전류 0.97 $\mu\textrm{A}$일 때 3.35를 갖는다. 이차전자 방출계수가 최대인 입사에너지에서 전자의 시료내 침투깊이와 탈출깊이와의 관계식을 통하여 박막 두께를 이론적으로 계산하였으며, 실험값과 비교적 일치하는 것을 확인하였다.

• 대한소아치과학회지
• /
• 제48권4호
• /
• pp.405-413
• /
• 2021

이 연구의 목적은 펜-타입 quantitative light-induced fluorescence(QLF) 장비의 임상적 유구치 인접면 우식 탐지 성능을 평가하는 것이다. 이를 위해 형광 소실, 적색 자기형광 그리고 인접면 우식을 위해 간편화된 QLF 평가 기준(QS-proximal)이 사용되었으며 교익 방사선 영상과 비교, 평가되었다. 총 344개의 유구치 인접면이 분석되었으며 인접면 우식 병소는 시진과 방사선학적 검사 그리고 QLF 검진을 통하여 평가되었다. QLF 영상들을 이용하여 분석된 QLF 매개변수들과 QS-proximal을 방사선학적 평가와 비교하여 장비의 법랑질과 상아질 우식 탐지 능력에 대한 민감도, 특이도 그리고 area under receiver operating curve(AUROC)가 계산되었다. 두 QLF 매개변수 모두 준수한 상아질 우식 탐지 능력을 보였으며 AUROC은 △F = 0.794, △R = 0.750였다. QS-proximal(0.757 - 0.769)은 시진(0.653)보다 더 높은 AUROC을 나타내었다. 결론적으로 펜-타입 QLF 장비는 방사선학적 평가와 비교하여 임상적으로 적용 가능한 성능을 보였다.