• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집 Vol.3 No.2
• /
• pp.949-952
• /
• 2002

The mechanisms of pretilt angle generation for a nematic liquid crystal (NLC) with negative dielectric anisotropy on the blended polyimide (PI) surface containing trifluoromethyl moiety was studied. High LC pretilt angle on the blended polymer surface with F3 was measured and the pretilt angle increased with rubbing strength. However, the low LC pretilt angle on the blended polymer surface with F1 and F2 was measured. The high LC pretilt angle generated is attributable to trifluoromethyl moiety in backbone structure on the blended PI surface. Therefore, the high pretilt angle of NLC can be achieved by using the blended polymer surface.

• 한국전기전자재료학회논문지
• /
• 제15권11호
• /
• pp.981-984
• /
• 2002

The mechanisms of pretilt angle generation for a nematic liquid crystal (NLC) with negative dielectric anisotropy on the blended polyimide (PI) surface containing trifluoromethyl moiety were studied. High LC pretilt angle on the blended polymer surface with F3 was measured and the pretilt angle increased with rubbing strength. However, the low LC pretilt angle on the blended polymer surface with F1 and F2 was measured. The high LC pretilt angle generated is attributable to trifluoromethyl moiety in backbone structure on the blended PI surface. Therefore, the high pretilt angle of NLC can be achieved by using the blended polymer surface.

• 한국전기전자재료학회논문지
• /
• 제14권12호
• /
• pp.1023-1026
• /
• 2001

The control of high pretilt angle for nematic liquid crystal (NLC) with negative dielectric anisotropy on the rubbed blending polyimide (PI) of homeotropic and homogeneous alignment surface was studied. High LC pretilt angle on the rubbing blending polyimide of homeotropic PI and SE-7492 surface was measured and the LC pretilt angle increased wish blending ratio and rubbing strength. However, the low LC pretilt angle on the rubbed blending polyimide of homeotropic PI and SE-150 surface was measured. The high pretilt angle of NLC can be achieved by using the blending PI surface.

• 한국전기전자재료학회논문지
• /
• 제13권7호
• /
• pp.625-629
• /
• 2000

We synthesized a new copoly (PM4Ch-ChMA) copoly(poly(4-methacryloyloxy) chalcone-cholesteryl methacrylate) having chalconyl and cholesteryl moiety for homeotropic liquid crystal(LC) alignment. Pretilt angles of nematic(N) LC generated by linearly polarized UV exposure on the copolymer surfaces were investigated. Good thermal stabilities of the synthesized copolymer were obtained by TGA (Thermogravimetric Analysis) measurement. Pretilt angles of the NLC decreased with increasing UV exposure time on the copolymer surfaces. We consider that the pretilt angle of the NLC is attributed to increased chalcone by increased UV exposure time. High pretilt angle of the NLC is attributed to increased chalcone by increased UV exposure time. High pretilt angle of 81$^{\circ}$was observed after the UV exposure for 3 min.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 추계학술대회 논문집
• /
• pp.61-64
• /
• 1998

We have investigated the effects of ultraviolet (UV) light irradiation condition and imidization temperature for the generation of pretilt angle in nematic liquid crystal (NLC) on the two kinds of the polyimide (PI) surfaces. High pretilt angle of NLC is generated with oblique p-polarized UV light irradiation of 30$^{\circ}$ on PI surface for 20 min. Also, the high pretilt angle of NLC is generated with oblique p-polarized UV light irradiation of 10-30$^{\circ}$ on PI surface at 20min. The pretilt angle of NLC decreases with increasing the imidization temperature on all rubbed PI surfaces ; the pretilt angle of NLC with oblique p-polarized UV light irradiation of 30$^{\circ}$on PI surface decreases with increasing the imidization temperature. The high pretilt angle of NLC is observed due to high photo-depolymerization reaction by low surface energy at low imidization temperature. We suggest that the pretilt angle of NLC is strongly attributed to the photo-depolymerization reaction with the UV light irradiation condition and imidization temperature.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제11C권4호
• /
• pp.133-137
• /
• 2001

In this research, we synthesized various photo-crosslinkable polyimide based polymers. The control of pretilt angles for a nematic liquid crystal (NLC) using the photodimerization method on the photopolymers was studied. A good thermal stability of the photopolymers was measured by thermogravimetric analysis (TGA) measurement until 450C. High pretilt angles of the NLC were otained by polarized UV exposure on the photopolymers containing biphenyl (BP), decyl (de), and cholesteryl (chal) groups, respectively. However, low pretilt angles of the NLC were measured by polarized UV exposure on the photopolymers containing fluorine and chalcone groups. The high NLC pretilt angles generated are attributable to the biphenyl and alkyl moieties, and the photodimerized chalocone group of the photopolymers. Additionally, good voltage-transmittance and response time characteristics were observed by UV exposure on the photopolymers.

• Transactions on Electrical and Electronic Materials
• /
• 제10권4호
• /
• pp.140-142
• /
• 2009

We have investigated the continuous pretilt angle generation for liquid crystals using a rubbing treated mixture layer consisting of homogeneous and homeotropic polyimides. Various pretilt angles in the range from $0^{\circ}$ to $60^{\circ}$ were achieved as a function of the concentration of homeotropic PI. The transmittance characteristics used to measure the pretilt angle showed that the pretilt angles were measured with a high reliability. We observed uniform liquid crystal alignment on the rubbing treated mixture layer.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1997년도 춘계학술대회 논문집
• /
• pp.127-129
• /
• 1997

The high pretilt angles in nematic liquid crystals (NLCs) have been generated on robbed polythiophene (PTP) surfaces with alkyl chain lengths. The pretilt angle of the NLC was observed on unidirectionally rubbed PTP surfaces with alkyl chains with more than 9 carbon atoms. We obtained the Pretilt angle of 15~40$^{\circ}$ on rubbed PTP surfaces with 10 carbon atoms in the a1ky1 chain. Also, the pretilt angles of 65~80$^{\circ}$ of NLC were obtained on rubbed PTP surfaces with 11 and 12 carbon atoms in the alkyl chain. We suggest that this high pretilt angle generation in NLC is due to the surface-excluded volume effect by the alkyl chain lengths between. the LCs and the PTP surfaces. Finally, we conclude the odd-even effect on rubbed PTP surfaces is clearly contributed to the pretilt angle generation.

• 한국전기전자재료학회논문지
• /
• 제14권2호
• /
• pp.130-132
• /
• 2001

The mechanisms of pretilt angle generation in nematic liquid crystal (NLC) with negative dielectric anisotropy on a rubbed polyimide (PI) surface for homeotropic alignment were studied. The pretilt angle of negative type NLC was smaller than that of the positive type NLC for all rubbing strength regions on the rubbed PI surface. The pretilt angle generated in NLC does not attributable to steric interaction between the fluorine moiety of NLC and the polymer surface on the rubbed PI surface. Consequently, the mechanism of the pretilt angle generation for homeotropic alignment is different from the one for homogeneous alignment.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 춘계학술대회 논문집 디스플레이 광소자분야
• /
• pp.81-83
• /
• 2003

We have investigated the generation of pretilt angle for a nematic liquid crystal (NLC) alignment with rubbing alignment method on polyimide surfaces using thin plastic substrates. It was found that monodomain alignment of LNC is obtained with rubbing alignment method on polyimide surfaces using thin plastic substrates. The generated NLC pretilt angles are about $3^{\circ}$ by the rubbing alignment method on thin plastic substrates, However, the pretilt angle measured at about $1.7^{\circ}$ lower on the glass substrate than by thin plastic substrate. It is considered that this alignment may be attributed to roughness of micro groove substrate. The tilt angle increases with increasing baking temperature for making polyimide layer using glass substrate. It was concluded that pretilt angle in the polyimide surface is attributable to the increasing of imide rato.