• 콘크리트학회논문집
• /
• 제22권1호
• /
• pp.113-122
• /
• 2010

후 긴장된 PS 강재의 부식과 파단은 프리스트레스 콘크리트 교량의 안전에 매우 심각한 문제를 발생시키고 있다. 따라서 교량의 내하력 평가시 PS 강재의 부식 상태를 조사해야 하며, 부식된 PS 강재가 발견되는 경우, 부식에 의한 강재의 단면적 감소량을 극한강도 평가시 고려해야만 한다. 선행 연구에서는 연속음향감지기법을 그라우팅되고 후 긴장된 PS 강연선의 부식과 파단을 감지할 수 있는 신뢰할 만한 비파괴검사방법으로 평가하였다. 이 연구에서는 긴장재에 도입된 응력 수준이 현행 설계기준에 제시된 수준보다 낮게 도입된 PS 강연선에 대해 부식에 의한 강선 파단을 감지하기 위한 실험적 연구를 수행하였다. 이를 위해 프리스트레스의 크기가 각각 인장강도의 66%와 40%로 도입된 PS 강연선이 포함된 길이 10 m의 PSC 보를 제작하였다. 부식 촉진 장비를 이용하여 긴장재를 인위적으로 부식시켰으며, 7개의 음향센서와 연속음향감지장치를 이용하여 실험부재를 모니터링하였다. 부식 촉진 실험 동안 각 PS 강연선으로부터 2번의 강선 파단음파를 성공적으로 감지하였으며, 또한 오차범위 20 mm 이하로 음원 위치를 표정할 수 있었다. 이상의 실험 결과를 토대로 그라우팅되고 후 긴장된 PSC 보에서 발생되는 PS 강선 파단을 감지하는데 연속음향감지기법을 적용할 수 있다고 판단된다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 가을 학술발표대회 논문집(III)
• /
• pp.656-661
• /
• 1998

This paper presents a method of statistical analysis and sensitivity analysis of creep and shrinkage effects in PSC box girder bridges. The statistical and sensitivity analyses are performed by using the numerical simulation of Latin Hypercube sampling. For each sample, the time-dependent structural analysis is performed to produce response data, which are then statistically analyzed. The probabilistic prediction of the confidence limits on long-term effects of creep and shrinkage is then expressed. Three measures are examined to quantify the sensitivity of the outputs to each of the input variables. These are rank correlation coefficient(RCC), partial rank correlation coefficient(PRCC) and standardized rank regression coefficient(SRRC) computed on the ranks of the observations. Probability band widens with time, which indicates an increase of prediction uncertainty with time. The creep model uncertainty factor and the relative humidity appear as the most dominant factors with regard to the model output uncertainty.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 가을 학술발표대회 논문집(III)
• /
• pp.680-685
• /
• 1998

Prestressed concrete I-girders were used in the bridge applications in the early 1950s. During the last four decades, the most widely used girder length of bridges have been below 30meters. The main objective of this study is to develope the alternative section for long span bridge which exceed 40 meters. The developed Bulb-Tee girder has a wide bottom flange to enhance the compressive strength and to allow placement of a large number of strands in the bottom flange. New bulb-tee shaped PSC girder sections are proposed in this paper. Splicing the technique for long span bridge girder to reduce the self weight is also proposed.

• 콘크리트학회논문집
• /
• 제24권6호
• /
• pp.695-703
• /
• 2012

현재 교량, 터널, 원전격납구조물, 가스탱크 등의 주요 사회기반 구조물은 긴장재에 의해 구속효과가 적용된 프리스트레스트 콘크리트(PSC) 구조물로 주로 이루어져 있으며, 기술의 발전과 함께 프리스트레스트 콘크리트의 적용범위가 넓어지고 있는 추세이다. 일반적으로 콘크리트 구조물은 다른 구조재료에 비하여 내화성이 뛰어나다고 평가되고 있으나, 긴장재에 의해 구속된 프리스트레스트 콘크리트 구조물의 경우, 고온의 화재에 대한 부재의 거동은 일반 콘크리트 구조물의 거동과는 상이하나, 이와 관련된 국내외 연구 또한 미비한 실정이다. 그러므로, 이 연구에서는 $1400{\times}1000{\times}300mm$ 부재의 양방향에 430 kN의 긴장력을 준 비부착 프리스트레스트 콘크리트 패널부재를 제작하여, 5분 이내에 $1200^{\circ}C$의 화재하중을 가할 수 있는 RABT 화재 시나리오를 적용하여 이방향으로 구속된 프리스트레스트 콘크리트의 내화성능을 실험적으로 검토하였다. 또한 잔존내력구조실험을 수행하여, 화재에 의해 손상을 받은 프리스트레스트 콘크리트 구조물의 잔류응력을 일반 철근콘크리트 구조물과 비교 검토하였다. 이 연구 결과를 통해 화재에 대한 PSC 부재와 RC 부재의 거동은 서로 상이하였음을 확인하였다.

• 한국철도학회논문집
• /
• 제9권2호
• /
• pp.244-249
• /
• 2006

Recently, the SCP(Steel Confined Prestressed concrete) composite girders are developed to improve the characteristic such as displacement, vibration, and heavy dead load due to influence of self weight, and inefficiency of steel section of exiting girder-type railroad bridges. It is needed to verify the economical effciency of newly developed SCP composite girder bridge compared with the conventional girder-type bridges. In this paper, LCC analysis for alternative railroad bridges Is performed and its technique based on level of risk(probability of failure) is suggested. From the results, it may be stated that SCP composite girder bridge is more economical than a conventional one.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2001년도 춘계학술대회 논문집
• /
• pp.401-407
• /
• 2001

Out of 412km long Kyung-bu high-speed railway, 302km was designed in tile form of either bridges or tunnels. Most of bridges were designed to be prestressed concrete box girder type. The precast span method was selected because of good quality of bridge section secured by factory manufacturing, fast construction speed, low construction cost with mechanized construction and the safety fur field workers. The precast span method has been mainly utilized in bridges consisted of repeated simple spans. However, we applied the precast span method to continuous bridge for high-speed railway Since it was the first attempt to apply ate precast span method to a continuous bridge for high-speed railway, many design and construction details were studied and implemented in the construction. Design and construction processes of a continuous bridge construction using tile precast span mettled are briefly described in this paper.

• Computers and Concrete
• /
• 제20권5호
• /
• pp.563-572
• /
• 2017

Ordinary reinforced concrete (RC) and prestressed concrete bridges are two popular and typical types of short- and medium-span bridges that accounts for the vast majority of all existing bridges. The cost of maintaining, repairing or replacing degraded existing RC bridges is immense. Detecting the abnormality of RC bridges at an early stage and taking the protective measures in advance are effective ways to improve maintenance practices and reduce the maintenance cost. This study proposes a systematic method from influence line (IL) identification to damage detection with applications to RC bridges. An IL identification method which integrates the cubic B-spline function with Tikhonov regularization is first proposed based on the vehicle information and the corresponding moving vehicle induced bridge response time history. Subsequently, IL change is defined as a damage index for bridge damage detection, and information fusion technique that synthesizes ILs of multiple locations/sensors is used to improve the efficiency and accuracy of damage localization. Finally, the feasibility of the proposed systematic method is verified through experimental tests on a three-span continuous RC beam. The comparison suggests that the identified ILs can well match with the baseline ILs, and it demonstrates that the proposed IL identification method has a high accuracy and a great potential in engineering applications. Results in this case indicate that deflection ILs are superior than strain ILs for damage detection of RC beams, and the performance of damage localization can be significantly improved with the information fusion of multiple ILs.

• 한국구조물진단유지관리공학회 논문집
• /
• 제7권1호
• /
• pp.157-163
• /
• 2003

Recently, the number of Prestressed Concrete(PSC) bridges needed repair and retrofit because of the increase of heavy traffic loads and aging of concrete materials. But there are a few related researches about strengthening PSC bridges. In this study, the practicability of strengthening methods for PSC beam were studied by the static experimental method. PSC beams in length of 6m were made with concrete slabs. Glass fiber sheeting and external post-tensioning methods were used for strengthening PSC beams. Some beams were strengthened after cracks to investigate the applicability for cracked bridges. As a result, there strengthening methods were efficient at increasing the cracking loads and the failure load, to decrease deflection and prevent cracks. In the case of using glass fiber retrofit methods, it should be careful in the anchorage problems for preventing the bonding failure.

• 한국재난관리표준학회지
• /
• 제1권3호
• /
• pp.51-57
• /
• 2008

프리스트레스트 콘크리트 사장교는 재료의 특성상 크리프 및 건조수축 등에 의한 장기거동의 영향을 크게 받는다. 이 연구에서는 콘크리트 구조물의 장기거동 예측에 일반적으로 이용되는 CEB-FIP모델과 ACI 모델을 예제 교량에 적용하여 상대습도의 변화에 따른 영향을 알아보았다. 주형 모멘트의 경우 CEB-FIP 모델이 ACI 모델보다 상대습도 변화에 대해 더 큰 영향을 받으며 영향도도 경우에 따라서는 무시할 수 없을 것으로 나타났다. 또한 동일 조건에서도 두 모델간 장기거동이 일부 단면에서는 비교적 크게 차이가 났다. 따라서, 장기거동에 대한 수치해석 결과는 재료시험과 예측모텔간의 영향 인자들에 대 한 민감도 분석을 거친 후에 보완하여 적용할 필요가 있다고 본다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.1158-1164
• /
• 2007

Recently, the demand on the practical application of life-cycle cost effectiveness for design and rehabilitation of civil infrastructure is rapidly growing unprecedentedly in civil engineering practice. Accordingly, it is expected that the life-cycle cost in the 21st century will become a new paradigm for all engineering decision problems in practice. However, in spite of impressive progress in the researches on the LCC, so far, most researches in Koreahave only focused on roadway bridges, which are not applicable to railway bridges. Thus, this paper presents the formulation models and methods for uncertainty-based LCCA for railroad bridges consideringboth objective statistical data available in the agency database of railroad bridges management and subjective data obtained form interviews with experts of the railway agency, which are used to anew uncertainty-based expected maintenance/repair costs including lifetime indirect costs. For reliable assessment of the life-cycle maintenance/repair costs, statistical analysis considering maintenance history data and survey data including the subjective judgments of railway experts on maintenance/management of railroad bridges, are performed to categorize critical maintenance items and associated expected costs and uncertainty-based deterioration models are developed. Finally, the formulation for simulation-based LCC analysis of railway bridges with uncertainty-based deterioration models are applied to the design-decision problem, which is to select an optimal bridge type having minimum Life-Cycle cost among various railway bridges types such as steel plate girder bridge, and prestressed concrete girder bridge in the basic design phase.