• 지질공학
• /
• 제9권3호
• /
• pp.227-241
• /
• 1999

단열암반 내의 지하수 흐름은 단열의 분포특성과 밀접한 관계를 갖고 있으며, 수리전도도와 직접적인 관계를 갖는 인자로서 단열 틈의 크기와 단열 교차빈도가 고려된다. 본 연구는 여수반도 북부지역의 화산암에 분포하는 단열의 간격과 틈의 크기에 대한 확률밀도함수의 유형과 단열의 분포특성이 수리전도도 값에 미치는 영향 및 상관관계를 분석하였다. 단열의 분포특성은 core logging과 초음파주사 검층을 통하여 조사되었으며, 일정구간별 수리전도도는 이중패커를 이용한 정압/압력강하 시험으로서 산출되었다. 연구지역에 분포하는 단열간격과 단열조별 틈의 크기는 대수정규분포를 나타내지만, 개구성 단열 틈의 크기는 정규분포에 가깝다. Core logging에 의한 투수성 단열, 텔레뷰어 검층에 의한 개구성 단열군, 그리고 Set 1에 속하는 단열들이 교차되는 수리시험 구간에서는 수리전도도 값과 양의 상관관계를 보였다. 단열암반의 수리전도도는 투수성 단열 틈의 크기에 1차적인 영향을 받으며 단열의 교차정도 및 크기에 2차적인 영향을 받는 것으로 해석된다.

• Korean Journal of Acupuncture
• /
• 제22권2호
• /
• pp.127-149
• /
• 2005

This study is designed to investigate the method of manufacturing herbal acupuncture through literature of oriental medicine. The findings of this study are as follows; 1. The methods of manufacturing herbal acupuncture go through the process of abstraction, purification, mixing, filtration, putting and tight sealing in the container, sterilization, quality control, printing and packing 2. There are many ways to manufacturing herbal acupuncture, for example water-alcohol precipitation, alcohol-water precipitation, liquid-liquid abstract, acid-base abstract, metal base precipitation, distillation, molecular structure, polyamide absorption, dialysis, and ion exchange, etc. And popular method is water-alcohol precipitation. This is through alcohol precipitate extracting the principal ingredients from water abstraction. This is very simple and efficient way using melting characteristics of compounds in herb to water and ethanol. 3. Sterilization of herbal acupuncture is through heating-pressure, boiling, steam flowing, low temperature, filtering, radiation, cooling, and microwaves. Nowadays filtering is commonly used. And sterilization is estimated by an examination of asepsis . 4. Herbal acupuncture must be undergo study and experiment to clinical use. The problems of herbal acupuncture are turbidity, instability, causing hemolysis, pain, and fever. So many provisions (addition, sterilization, and filtration etc.) must be prepared. 5. The theory of manufacturing herbal acupuncture is from oriental medicine, not western. So it must be corresponded to oriental medical theory, for example Gimi(氣味), Guigyung(歸經), Ingyung(引經), Bosa(補瀉), and Match of Herb. It is recommended that further study of many other sided investigations in the future.

• 약학회지
• /
• 제33권3호
• /
• pp.167-174
• /
• 1989

KR-1008 and KR-30006 are 1,4-dihydropyridine derivatives, new vasodilatory calcium antagonists from KRICT. Calcium antagonistic properties of the compounds were studied in the isolated heart (Langendorff preparation), pulmonary artery (vasodilation), and in the papillary muscle (negative inotropic effect) of the guinea pig. Antihypertensive effect were also investigated after i.v. or oral administration in the SHR (spontaneously hypertensive rat). They produced a sigificant inhibition of Ca-induced contraction in the guinea pig pulmonary artery at the concentrations of above $10^{-8}M$. The negative inotropic effect of the electrically stimulated papillary muscle appeared from the concentration of $10^{-6}M$, which is about hundred times higer than the concentration of vasodilation effect. Left ventricular pressure also decreased from the concentration of $3\;{\times}\;10^{-6}M$ in KR-1008 and KR-3006 in the Langendorff heart preparations. Coronary flow rate increased from $10^{-6}M$ in KR-1008 and nicardipine and appeared no change in KR-30006. The antihypertensive effect of KR-1008 (EC 20: $2.9\;{\mu}g/kg$) was potent more than nicardipine (EC 20: $3.4\;{\mu}g/kg$) and than Kr-30006 (EC 20: $6.8\;{\mu}g/kg$) was, after i.v. bolus injection in the anesthetized SHR. The antihypertensive effect in the conscious SHR appeared 30 minutes after oral administration of 10 mg/kg and persisted 4 hrs in KR-1008 and 12 hrs in KR-30006. Heart rate tended to increase for 0.5-1 hr after oral administration of the test compounds.

• 한국CDE학회논문집
• /
• 제13권2호
• /
• pp.139-152
• /
• 2008

In order to survive worldwide competition, today's industries are experiencing strong pressure to introduce higher quality products with lower cost and shorter lead-time. Therefore, the role of design in the process of product development is increasing in significance. In this research, two methods for improving the design capability are proposed: construction of design environment and design automation using 3D CAD system. The designers and design process are the core of product design using 3D CAD system. In order to maximize the design performance, construction of the design environment including selection of a suitable system, designer training for best use of the system, establishment of an efficient design process, and stabilization of the environment are required. A method is suggested to construct design environment by systematizing the contents of the projects and consulting experiences carried out for various categories of business such as electronic devices, motorcycles, electricity parts, sanitary wares, injection molds, and die casing molds. Design automation helps reduce tedious and time-consuming jobs, simplify complicated and error-prone modeling and drawing works to shorten the lead time and improve the product quality. To develop a design automation system, understanding the process and the related knowledge on design are very important before implementing the system using API provided by 3D CAD system. In this research, an eight-step procedure is proposed for the development of a design automation system. These eight steps are analysis of needs, determination of specification, verification of specification using 3D CAD system, inspection of related API functions, programming, field test, application in practice, and maintenance. A case study in which five design automation systems in the design of turbine generators using the proposed method is introduced in detail. These systems play important roles in the generation of various output items including 3D models, drafts, material information, and NC data. The case study shows how effectively the design time is reduced and the quality improved using those systems.

• 대한환경공학회지
• /
• 제22권4호
• /
• pp.713-722
• /
• 2000

본 연구는 입자크기를 분석하기 위한 장치인 레이저회절 분광계의 측정오차 및 재현성을 분석한 것이다. 레이저회절 spectrometers는 입자크기를 분석하기 위한 장치 중에서 가장 대표적이고 중요성을 가진다. 이 측정장치는 운전이 간단하며, 입자분석에 있어서 재현성이 우수하고, 빠른 속도로 분석이 가능한 형태이다. 입자크기를 분석하는 과정에 있어서 공급되는 분산형태와 흐름율에 따라서 측정오차가 미세하게 발생되었고, 흐름율은 분산형태가 건식인 경우 0.1~23 g/min로 공급하였고, 습식인 경우는 분산되는 용매에 따라서 1.4~35 %가 되도록 조절하여 측정결과에 따라서 발생되는 측정오차를 분석하였다. 흐름을 변화에 따라서 발생되는 측정 오차는 측정 cell 내의 입자에 입사되는 레이저 회절패턴이 변화함으로서 측정오차가 다양하게 발생하였다. 본 연구에서 측정오차를 분석하기 위해서는 입자모양, 크기, 분산형태와 용매, 흐름율과 농도의 변화에 따라서 실험을 실행하였고, 분석장치의 시스템에 따른 측정오차를 나타내기 위해서는 장치내의 역학적인 공정, 측정시간, 초점거리, 주입압력, 전처리과정인 ultrasonic이나 혼합에 의한 분산효과에 따라 측정오차 및 재현성을 분석하였다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 1999년도 제13회 학술강연논문집
• /
• pp.27-27
• /
• 1999

To illustrate the global variation of the droplet mean diameters and the turbulent flow characteristics in counterflowing internal mixing pneumatic nozzle, the experimental measurements at five axial downstream locations(i.e., at Z=30, 50, 80, 120, and 170mm) were made using a PDPA(Phase Doppler Particle Analyzer) under the different air injection pressures ranging from 40 ㎪ to 120 ㎪. A nozzle with axi-symmetric tangential-drilled four holes at an angle of 15$^{\circ}$ has been designed and manufactured. The distributions of velocities, turbulence intensities, turbulence kinetic energy, turbulent correlation coefficients, spray angle, droplet mean diameters, volume flux, number density are quantitatively analyzed. It is possible to discern the effects of increasing air pressure. It indicates that the strong axial momentum in spite of more or less disparity between the velocity components means more reluctant to disperse radially, and that axial fluctuating velocities are substantially higher than those of radial and tangential ones, suggesting that the disintegration process is enhanced under higher air assist. The larger droplets are detected in the spray centerline at the near stations and smaller ones are generated due to further subsequent breakup at farther axial locations are attributed to the internal mixing type nozzle characteristics. Despite of the strong axial momentum, the poor atomization around the centre close to the nozzle exit is attributed to the lower rates of spherical particles which are not subject to instantaneous breakup. As it goes downstream, however, substantial increases in SMD(Sauter Mean Diameter) from the central part toward spray periphery are understandable because the droplet relative velocity is too low to bring about any subsequent disintegration.

• 한국해양공학회지
• /
• 제29권3호
• /
• pp.241-248
• /
• 2015

A subsea pipeline for oil/gas transportation or gas injection is subjected to extreme variations in internal pressure and temperature, which can involve a strain rate effect on the pipeline material. This paper describes the flow stress characteristics of a pipeline material called API 5L X52N PSL2, using and experimental approach. High-speed tensile tests were carried out for two metal samples taken from the base and weld parts. The target temperature was 100℃, but two other temperature levels of –20℃and 0℃ were taken into account. Three strain rates were also considered for each temperature level: quasi static, 1/s, and 10/s. Flow stress data were proposed for each temperature level according to these strain rates. The dynamic hardening behaviors of the base and weld metals appeared to be nonlinear on the log-scale strain rate axis. A very high material constant value was required for the Cowper-Symonds constitutive equation to support the experimental results.

• 한국기계가공학회지
• /
• 제16권6호
• /
• pp.117-124
• /
• 2017

In this study, we investigated the optimization of process conditions by using the Six Sigma process, design of experiment (DOE) method and response surface method (RSM) to resolve dimensional deviation and appearance problems arising from the shortened process time of the mobile phone rear cover. The analysis of the trivial many was performed by 2-sample T-test and cooling time, and mold temperature and packing pressure were selected as the vital fews affecting the overall width of the product. The optimal conditions of the process were then studied using the DOE and the RSM. We analyzed the improvement effects by applying the selected optimal conditions to the production process and the results showed that the difference between the mean value and target value of the overall width stood at 0.01 mm, an improvement of 88.89% compared to current process that fell within the range of standard dimension. The short-term process capability stood at $4.77{\sigma}$, which implied an excellent technology level despite a decrease by $0.22{\sigma}$ compared to the current process. The difference in process capability decreased by $2.44{\sigma}$ to $0.41{\sigma}$, showing a significant improvement in management capability. Ultimately, the process time of the product was shortened from 18.3 seconds in the current process to 13.65 seconds, resulting in a 34.07% improvement in production yield.

• 대한기계학회논문집B
• /
• 제31권2호
• /
• pp.188-194
• /
• 2007

New diesel engines equipped with common-rail injection systems and advanced engine management control allow drastic decreases in the production of particulate matters and nitrogen oxides with a significant advantage in terms of the fuel consumption and $CO_2$ emissions. Nevertheless, the contribution of exhaust gas after treatment in the ultra low emission vehicles conception has become unavoidable today. Recently the passive type DPF(Diesel Particulate Filter Trap) system for diesel passenger vehicle has been manufactured into mass production from a French automotive maker since the year of 2000. This passive DPF system fully relies on the catalytic effects from additives blended into the diesel fuel and additives injected into the DPF system. In this study, the effects of PM regeneration in the commercial diesel passenger vehicle with the passive type DPF system were investigated in chassis dynamometer CVS(constant volume sampler)-75 mode. As shown in this experimental results, the DPF regeneration was observed at temperature as low as $350^{\circ}C$. And the engine-controlled the DPF regeneration founded to be one of the most promising regeneration technologies. Moreover, the durability of this DPF system was evaluated with a season weather in terms of the differential pressure and exhaust gas temperature traces from a road test during the total mileage of 80,000km.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2017년도 제48회 춘계학술대회논문집
• /
• pp.682-685
• /
• 2017

본 연구는 비원형 Effervescent Type 이유체 노즐의 분사 특성을 조사하기 위한 실험적 연구를 수행하였다. 이를 위해 거의 동일한 노즐 출구 면적으로 가공한 2종류의 비원형 노즐 (E1, E2)과 1종류의 원형 노즐 (C)을 대상으로 비교 실험을 진행하였다. 이때 노즐에 장착된 Aerorator는 노즐 출구 면적과의 Aspect Ratio를 맞추기 위해 지름이 다른 3종류를 사용하였다. 따라서 각 노즐마다 3가지의 Aspect Ratio에 따라 3번의 실험을 진행하였으며, 전체 총 9종의 실험이 진행되었다. 실험은 Liquid의 유량을 고정시킨 후, 유입되는 Air의 양을 제어하며 진행하였으며, 노즐 내부 압력과 액적의 크기 (SMD)를 측정하고 노즐에서 분사 이미지를 촬영하였다. 이를 통해 3종의 노즐의 유량 계수를 압력 분무방정식과 Jedelsky 방정식을 비교 계산하였고, Jedelsky 방정식이 약 4배 정도 더 큰 값을 갖는 것을 확인하였다. 노즐에서 분사되는 SMD는 원형보다 비원형에서 더 작은 값을 갖는 것으로 나타났으며, 이는 유량 계수 값의 차이 의해 야기된 것으로 예상된다.