• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.275-276
• /
• 2009

We have studied physical properties of organic light-emitting diodes (OLEDs) in a device with 7,7,8,8-tetracyanoquinodimethane (TCNQ). Since the TCNQ has a high electron affinity, it is widely used for a charge-transport and injection layer. And the TCNQ-derivatives have also been used to control the conductivity of the materials. It is known that a charge injection and transport in OLEDs with a TCNQ-derivative enhances a performance of the devices such as operating voltage and efficiency. To see how the TCNQ affects on the device performance, we have made a reference device in a structure of ITO(170nm)/TPD(40nm)/$Alq_3$(60nm)/LiF(0.5nm)/Al(100nm). And several type of devices were manufactured by doping TCNQ either in TPD or $Alq_3$ layer. The TCNQ layer was also formed in between the organic layers. N,N'-diphenyl-N,N'-di(m-tolyl)-benzidine (TPD), tri(8-hydroxy quinoline) aluminium ($Alq_3$), and TCNQ layers were formed by thermal evaporation at a pressure of $10^{-6}$ torr. The deposition rate was $1.0{\sim}1.5\;{\AA}/s$ for TPD, and $1.0{\sim}1.5\;{\AA}$ for $Alq_3$. The LiF was thermally evaporated at a deposition rate of $0.2\;{\AA}/s$ successively. The device with TCNQ-derivative improved the turn-on voltage compared to the one without TCNQ-derivative.

• Journal of The Korean Astronomical Society
• /
• v.35 no.4
• /
• pp.159-174
• /
• 2002

Cosmological hydrodynamic simulations of large scale structure in the universe have shown that accretion shocks and merger shocks form due to flow motions associated with the gravitational collapse of nonlinear structures. Estimated speed and curvature radius of these shocks could be as large as a few 1000 km/s and several Mpc, respectively. According to the diffusive shock acceleration theory, populations of cosmic-ray particles can be injected and accelerated to very high energy by astrophysical shocks in tenuous plasmas. In order to explore the cosmic ray acceleration at the cosmic shocks, we have performed nonlinear numerical simulations of cosmic ray (CR) modified shocks with the newly developed CRASH (Cosmic Ray Amr SHock) numerical code. We adopted the Bohm diffusion model for CRs, based on the hypothesis that strong Alfven waves are self-generated by streaming CRs. The shock formation simulation includes a plasma-physics-based 'injection' model that transfers a small proportion of the thermal proton flux through the shock into low energy CRs for acceleration there. We found that, for strong accretion shocks, CRs can absorb most of shock kinetic energy and the accretion shock speed is reduced up to $20\%$, compared to pure gas dynamic shocks. For merger shocks with small Mach numbers, however, the energy transfer to CRs is only about $10-20\%$ with an associated CR particle fraction of $10^{-3}$. Nonlinear feedback due to the CR pressure is insignificant in the latter shocks. Although detailed results depend on models for the particle diffusion and injection, these calculations show that cosmic shocks in large scale structure could provide acceleration sites of extragalactic cosmic rays of the highest energy.

• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.18 no.4
• /
• pp.506-519
• /
• 2011

Purpose: The purpose of this study was to identify content of Fundamental Nursing Practice (FNP) and the educational needs for nursing practice items in schools of nursing. Methods: Participants were 81 professors who were teaching FNP and 166 clinical nurses. The research questionnaire included 148 practice items, which were selected by content analysis of 7 FNP textbooks. Data were collected from May 20 to July 27, 2011 and analyzed using descriptive statistics and t-test with SPSS 17.0. Results: The research findings showed that : 1) the seven items included in the education content of all schools of nursing were putting on sterile gloves, checking radial pulse, checking blood pressure in the arm, Foley catheterization, injection preparation with ampule, intramuscular injection in the buttocks, and mixing intravenous fluid. Fifty items were included in the content in more than 80% of the schools. 2) Educational domains needing emphasis were medication, infection control, health assessment, oxygenation, urinary elimination, activity/positioning, and nutrition. There were significant differences in reported educational needs between professors and clinical nurses for 62.8% of practice items. Conclusions: Results indicated that standardization of FNP education contents using the findings of this study should lead to improvement in quality of FNP education.

• Journal of the Korean Geotechnical Society
• /
• v.21 no.1
• /
• pp.43-50
• /
• 2005

Jet grouting method is widely being used in many geotechnical problems, especially for the purpose of reinforcement of clayey ground and cut-off wall of sandy ground. However, its design depends on highly empirical method, in which many researches have been undertaken. This study investigated the effect of cavitation on jet grouting. Small-scaled model tests were carried out using specially designed and fabricated device to analyze the effect of cavitation on jet grouting with various test conditions including ground condition, injection pressure, and injection time. The test results show that cavitation has a significant effect on jet grouting, and it has a potential for engineering application.

• Journal of Energy Engineering
• /
• v.11 no.2
• /
• pp.90-98
• /
• 2002

The effects of swirl and combustion parameters on the performance and emission in a turbo-charged D.I. diesel engine of the displacement 9.4L were studied experimentally in this paper. Generally the swirl in the combustion process of diesel engine promotes mixing of the injection fuel and the intake air. It is a major factor to improve the engine performance because the fuel consumption and NO$_{x}$ is trade-off according to the high temperature and high pressure of combustion gas in a turbocharged D.I. diesel engine, it's necessary to thinking over the intake and exhaust system, the design of combustion bowl and so on. In order to choose a turbocharger of appropriate capacity. As a result of steady flow test, when the swirl ratio is increased, the mean flow coefficient is decreased, whereas the gulf factor is increased. Also, through engine test its can be expected to meet performance and emissions by optimizing the main parameter's; the swirl ratio is 2.43, injection timing is BTDC 13$^{\circ}$ CA, compression ratio is 16, combustion bowl is re-entrant 5$^{\circ}$, nozzle hole diameter is $\Phi$0.28*6, turbocharger is GT40 model which are compressor A/R 0.58 and turbine A/R 1.19.

• Korean Journal of Materials Research
• /
• v.20 no.11
• /
• pp.570-574
• /
• 2010

A diamond-like carbon (DLC) film deposited on a WC disk was investigated to improve disk wear resistance for injection molding of zirconia optical ferrule. The deposition of DLC films was performed using the filtered vacuum arc ion plating (FV-AIP) system with a graphite target. The coating processing was controlled with different deposition times and the other conditions for coating, such as input power, working pressure, substrate temperature, gas flow, and bias voltage, were fixed. The coating layers of DLC were characterized using FE-SEM, AFM, and Raman spectrometry; the mechanical properties were investigated with a scratch tester and a nano-indenter. The friction coefficient of the DLC coated on the WC was obtained using a pin-on-disk, according to the ASTM G163-99. The thickness of DLC films coated for 20 min. and 60 min. was about 750 nm and 300 nm, respectively. The surface roughness of DLC films coated for 60 min. was 5.9 nm. The Raman spectrum revealed that the G peak of DLC film was composed of $sp^3$ amorphous carbon bonds. The critical load (Lc) of DLC film obtained with the scratch tester was 14.6 N. The hardness and elastic modulus of DLC measured with the nano-indenter were 36.9 GPa and 585.5 GPa, respectively. The friction coefficient of DLC coated on WC decreased from 0.2 to 0.01. The wear property of DLC coated on WC was enhanced by a factor of 20.

• Restorative Dentistry and Endodontics
• /
• v.21 no.1
• /
• pp.375-384
• /
• 1996

The purpose of this study was to investigate the functional involvement of sympathetic nerve in the control of the microcirculation in the dental pulp with the aim of elucidation of the involvement of neuropeptides and sympathetic nerve in neurogenic inflammation. Experiments were done on the 7 cats anesthetised with sodium pentobarbital, and sympathetic nerve to the' dental pulp was stimulated electrically (10 Hz, 4 V, 1.5 ms, 3.5 mins). Ana-adrenoceptor antagonist phentolamine and a neuropeptide Y antagonist D-myo-inositol-1,2,6-trisphosphate (PP56) were injected close intra-arterially into the dental pulp without changing the systemic blood pressure. The probe of laser Doppler flowmeter was placed on the buccal surface of ipsilateral canine teeth to the stimulation, and pulpal blood flow was measured. Stimulation of the sympathetic nerve decreased pulpal blood flow by $55.24{\pm}7.74\;%$ (mean${\pm}$SEM, n = 13). Stimulation of the sympathetic nerve following the injection of the ${\alpha}$-adrenoceptor antagonist phentolamine ($0.1{\mu}g$/kg) caused decrease of pulpal blood flow by $14.35{\pm}3.43%$ (mean${\pm}$SEM, n=5). Phentolamine attenuated the sympathetic nerve-induced pulpal blood flow decrease by $74.02{\pm}9.32%$ (mean${\pm}$SEM) Stimulation of the sympathetic nerve following the injection of the neuropeptide Y antagonist PP56 (2.3 mg/kg) caused decrease of pulpal blood flow by $30.64{\pm}7.92%$ (mean${\pm}$SEM, n=6). PP56 attenuated the sympathetic nerve-induced pulpal blood flow decrease by $44.37{\pm}11.01%$ (mean${\pm}$SEM). These data provide evidences of the co-contribution of nerepinephrine and neuropeptide Y on the sympathetic nerve-induced vasoconstriction in the feline dental pulp. In addition, they show functional evidences that sympathetic nerve plays an active role in controlling the microcirculation of the dental pulp.

• Archives of Plastic Surgery
• /
• v.37 no.2
• /
• pp.182-186
• /
• 2010

Purpose: Intramuscular stimulation (IMS) shows good results in the treatment of chronic pain patients who did not respond to other treatments such as oral analgesics, trigger point injection, nerve block and epidural steroid injection. But, IMS procedure especially, patients with diabetes mellitus (DM) has sometimes serious problem. So, we present a very rare case of intramuscular abscess in the sternocleiomastoid muscle after IMS with literature review. Methods: A 66 year old male visited our department 7 days after IMS in the neck. His premorbid conditions and risk factors of deep neck infection was DM and old age. Computed tomographic scans of the head and neck region were performed in this patient: signs of deep neck infection, were seen enhanced abscess in the sternocleidomastoid muscle, cellulitis overlying tissue of the neck, and air bubbles involved muscle. Necrotic wound was excised serially and we treated this with the Vacuum-assisted closure (VAC, Kinetics Concepts International, San Antonio, Texas) system device. After appropriately shaping the sponge in the pockets, continuous negative pressure of 125 mmHg was applied. The VAC therapy was utilized for a period of 12 days. Results: We obtained satisfactory results from wide excision, drainage of the abscess with the VAC system, and then primary closure. The postoperative course was uneventful. Results: We suggest that many of the infectious complications may be preventable by strict adherence to aseptic techniques and that some of the other complications may be minimized by refining the techniques with a clear understanding of the medical disorders of patients. And, the refined technique using the VAC system can provide a means of simple and effective management for the cervical intramuscular abscess, with better cosmetic and functional results.

• Journal of Korean Neurosurgical Society
• /
• v.50 no.6
• /
• pp.497-502
• /
• 2011

Objective : This study was conducted to compare the effect of etomidate with that of thiopental on brain protection during temporary vessel occlusion, which was measured by burst suppression rate (BSR) with the Bispectral Index (BIS) monitor. Methods : Temporary parent artery occlusion was performed in forty one patients during cerebral aneurysm surgery. They were randomly assigned to one of two groups. General anesthesia was induced and maintained with 1.5-2.5 vol% sevoflurane and 50% $N_2O$. The pharmacological burst suppression (BS) was induced by a bolus injection of thiopental (5 mg/kg, group T) or etomidate (0.3 mg/kg, group E) according to randomization prior to surgery. After administration of drugs, the hemodynamic variables, the onset time of BS, the numerical values of BIS and BSR were recorded at every minutes. Results : There were no significant differences of the demographics, the BIS numbers and the hemodynamic variables prior to injection of drugs. The durations of burst suppression in group E ($11.1{\pm}6.8$ min) were not statistically different from that of group T ($11.1{\pm}5.6$ min) and nearly same pattern of burst suppression were shown in both groups. More phenylephrine was required to maintain normal blood pressure in the group T. Conclusion : Thiopental and etomidate have same duration and a similar magnitude of burst suppression with conventional doses during temporary arterial occlusion. These findings suggest that additional administration of either drug is needed to ensure the BS when the temporary occlusion time exceed more than 11 minutes. Etomidate can be a safer substitute for thiopental in aneurysm surgery.

• Nuclear Engineering and Technology
• /
• v.24 no.1
• /
• pp.86-97
• /
• 1992

The purpose of this paper is to evaluate the direct vessel injection design from a pressurized thermal shock(PTS) viewpoint for the Combustion Engineering System 80+ A break of the main steam line from zero power and a 0.05 ft$^2$small break loss-of-coolant accident (LOCA) from full power were selected as the potential PTS events. In order to investigate the stratification effects in the reactor downcomer region, the fluid mixing analysis was performed using the COMMIX-IB code for steam line break and using the REMIX code for 0.05 ft$^2$small break LOCA. The stress distributions within the reactor vessel walls experiencing the pressure and the temperature transients were calculated using the OCA-P code for both events. The results of the analysis showed that a small break LOCA without decay heat presented the greatest challenge to the vessel, however, there is no crack initiation through end-of-life of the vessel with consideration of decay heat.