• 한국생활과학회지
• /
• 제17권5호
• /
• pp.963-973
• /
• 2008

Clothing pressure is closely connected with the degree of comfort of an athlete's tight-fitting garments. Therefore, the construction of sports garments is very important to the wearer's athletic performance. In this study, the fundamental relationship between the reduction rates of stretch fabrics and clothing pressure was explored with the aim of improving clothing comfort and obtaining a systematic pattern reduction for women's tight-fitting bodysuits. A women's bodysuit pattern was obtained by the draping method using a dressform. The basic pattern was divided into four parts and changed into reduced pattems according to the amount of fabric stretch determined by ASTM D2594. Clothing pressure was measured using an air-pack-type pressure sensor (model AMI 3037-2) at 20 locations (shoulder, 9 locations; bust, 5; and armhole, 6). Among the 15 garments tested, the mean pressure of the A1 bodysuit was 4.60 $gf/cm^2$, and that of the C5 bodysuit was 22.98 $gf/cm^2$. The mean pressures of the bodysuits with reduction rates of 10% and 20% were below 10 $gf/cm^2$, while those of suits with reduction rates of 30%,40%, and 50% (except C5) were below 20 $gf/cm^2$. The pressure at the shoulder was 9.50$\sim$32.24 $gf/cm^2$, which was higher than that at the bust (3.34$\sim$24.56 $gf/cm^2$) and the armhole (0.95$\sim$12.15 $gf/cm^2$). The mean pressures of the 15 bodysuits were divided into five groups using analysis of variance (ANOVA), and were found to be significantly different (p<0.001). Regression analysis afforded the following expression: mean pressure ($gf/cm^2$) = 1.607 + 0.369[reduction rate (%)].

• 한국의류학회지
• /
• 제45권4호
• /
• pp.586-597
• /
• 2021

This study analyzed clothing pressure, blood flow, and subjective sensations among women in their 50s and 60s while wearing commercially available yoga bra tops (YBTs). These findings could then serve as basic data for designing YBT for women in this age range. Clothing pressure and blood flow reactions were measured in seven participants wearing four commercially available YBTs. Subjective sensations of pressure and comfort were also evaluated. The calculated data were analyzed using the SPSS 24.0 statistical program. The results suggested that YBT4 exerted the lowest clothing pressure, while YBT2 and YBT3 exerted relatively higher clothing pressures. Participants' blood flow decreased while wearing YBTs compared to the control garment. The decrease of 47.3% when the participants wore YBT2 was especially significant. The results confirmed that the blood velocity rate was physiologically lower while wearing all four YBTs than when wearing the control garment. Results for subjective pressure and overall comfort confirmed that YBT2 and YBT3 exerted relatively high pressure, while YBT4 did not exert pressure.

• Clinical Pain
• /
• 제19권2호
• /
• pp.70-79
• /
• 2020

Objective: We evaluated the efficacy of a newly-developed spinal orthoses (V-LSO) by comparing the stabilizing effect, abdominal pressure, and comfort of 3 different semirigid LSOs (classic LSO, V-LSO, and Cybertech^®) during various body movements. Method: Thirty healthy volunteers (23~47 years, 24 males, 6 females) were selected. A dual inclinometer measured the range of motion (ROM) while the participants performed flexion/extension and lateral flexion of the lumbar spine with 3 LSOs. The LSO's pressure on the abdominal surface was measured using 9 pressure sensors while lying, sitting, standing, flexion/extension, lateral flexion, axial rotation, and lifting a box. Comfort and subjective immobilization were analyzed by a questionnaire. Results: V-LSO had a statistically significant effect on flexion over Cybertech^®. No significant differences were noted during extension and lateral flexion between the 3 LSOs. The abdominal pressure showed no significant differences while supine. While sitting, standing, and lifting a box, the mean abdominal pressure for V-LSO were significantly higher than those for Cybertech^®. During lumbar flexion, the mean abdominal pressures for classic LSO and V-LSO were significantly higher than that of Cybertech^®. For extension, lateral flexion and axial rotation, the abdominal pressure for V-LSO was significantly higher than those of classic LSO and Cybertech^®. In the subjective analysis, V-LSO and Cybertech^® scored best for comfort. Conclusion: The V-LSO and Cybertech^® were more comfortable than the classic LSO, and hence, may have improved compliance with decreased discomfort. V-LSO may be superior to the other LSOs in restricting lumbar movement and increasing intraabdominal pressure.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2000년도 춘계학술대회 논문집
• /
• pp.563-575
• /
• 2000

This study was carried out about the system engineering, the design, and Mock-up for the development of passenger car of Korean High Speed Train of maximum operating speed of 350km/h. The design was studied to carbody section ＆ lay out, ring, fitting, carbody, electrical system based on Korean-TGV. The design of aluminium alloy carbody which was enabled to reduce the weight of carbody structure and was studied with construction of air-tightness. Air pressure controlled system provided to comfort passenger due to a reduction of difference pressure between inside and outside of passenger room on running of the tunnel. The Interior design was performed in order to satisfy high speed and comfort to study by the modern design. The electrical system was designed two parts of logic and network for high reliability of train.

• Geomechanics and Engineering
• /
• 제13권1호
• /
• pp.43-61
• /
• 2017

The inverted T-type abutments are generally used in highway bridges constructed in Korea. This type of abutment is used because it has greater stability, with more pile foundations embedded in the bedrock, while simultaneously providing support for lateral earth pressure and vertical loads of superstructures. However, the cross section of inverted T-type abutments is large compared with the piers, which makes them more expensive. In addition, a differential settlement between the abutment and embankment, as well as the expansion joints, causes driving discomfort. This study evaluated the driving comfort of several types of abutments to improve driving comfort on the abutment. To achieve this objective, a traditional T-type abutment and three types of candidate abutments, namely, mechanically stabilized earth wall (MSEW) abutment supported by a shallow foundation (called "true MSEW abutment"), MSEW abutment supported by piles (called "mixed MSEW abutment"), and pile bent and integral abutment with MSEW (called "MIP abutment"), were selected to consider their design and economic feasibility. Finite element analysis was performed using the design section of the candidate abutments. Subsequently, the settlements of each candidate abutment, approach slabs, and paved surfaces of the bridges were reviewed. Finally, the driving comfort on each candidate abutment was evaluated using a vehicle dynamic simulation. The true MSEW abutment demonstrated the most excellent driving comfort. However, this abutment can cause problems with respect to serviceability and maintenance due to excessive settlements. After our overall review, we determined that the mixed MSEW and the MIP abutments are the most appropriate abutment types to improve driving comfort by taking the highway conditions in Korea into consideration.

• Journal of Sport and Applied Science
• /
• 제3권2호
• /
• pp.17-27
• /
• 2019

Purpose: This study is to conduct usability evaluations from the perspective of developing comfort-shoes for the middle-aged and elderly to identify key factors and derive implications for optimal comfort-shoes production. Research design, data, and methodology: A total of 10 middle-aged and elderly women in their 50s and 60s were selected as eligible for the rescue. For data collection, the study was conducted in a Gang Survey, where pre-explanations, shoes test, and interviews were conducted. The collected data were analyzed in a total of four stages. In step 1, the contents obtained through interviews with the subjects were recorded in text, organized and analyzed systematically, and in step 2, unnecessary vocabulary, sentences, and overlapping opinions were eliminated. In step 3, we classified areas around key functions and carried out categorization tasks. Finally, in Step 4, the results and implications of the study were derived by classifying each usability evaluation shoe as positive and negative text around categorized data. Results: There are a total of seven factors for comfort-shoes usability evaluation, which are categorized as cushion, fitting, stability, flexibility, lightweight, comfort, and pressure. Positive/negative factors for the derived usability evaluation factors were shown in the form of a positive-centered, negative-centered, and positive-mixed mix for each of the four products. Positive-focused products are VA products, which are seven times more positive than negative factors. Negative-centered products are CL and SA products, which are five times more negative than positive factors. Positive mixing was a CA product with a ratio of 1:1. Text-based usability evaluations allow us to proceed with analysis based on more scientific data rather than simply listening to opinions and judging by comments. Conclusions: The study discussed implications of developing comfort-shoes for middle-aged consumers and future directions were discussed.

• 한국의류산업학회지
• /
• 제25권2호
• /
• pp.210-220
• /
• 2023

Recently, smart wearable products, including electromyography (EMG) measurement devices and clothing, have been developed to monitor users' exercise levels, muscle activation, and muscle balance more effectively during fitness activities. However, technical and socioeconomic barriers, such as flexibility and durability, still pose challenges in terms of comfort, ease of wear, and wearability of smart clothing, which includes devices and circuits. To address these issues, this study developed a wearable EMG device integrated with clothing to collect valid EMG signals from desired muscles while maintaining comfort, functionality, and ease of wear. After deriving a combined structure that could stably position the wearable device within the clothing, a prototype was manufactured and evaluated for fit, compression, comfort, and exercise comfort test by ten participants (height = 176.2 cm, weight = 76.4 kg, chest circumference = 101.2 cm). The study found that the prototype had smaller circumferences around the chest, waist, and abdomen compared to commercial products, resulting in lower ratings for wearing comfort and ease of wear. However, the prototype received high ratings for fitting, pressure, and the exercise comfort test. Valid signals were obtained when the EMG device was combined to the prototype for the rectus femoris muscle, indicating stable positioning of the device during exercise.

• 문화기술의 융합
• /
• 제7권1호
• /
• pp.646-653
• /
• 2021

본 연구에서 개발된 의료용 침대는 N개의 건반으로 이루어져 각각이 엑츄에이터에 의해 수직으로 구동된다. 각 건반에는 M개의 센서가 실장되어 체압을 측정하므로 체압지도의 해상도는 MN에 의해 결정된다. 각 건반에는 센서 제어기가 실장되어 M개의 센서로부터 측정한 체압값을 CAN(Car Area Network)와 같은 직렬 통신 네트워크를 통해 메인제어기로 전달한다. 각 건반에는 모터를 구동하는 서보 드라이버가 하나씩 장착되며 메인 제어기와 CAN으로 연결되어 메인 제어기에서 지시된 변위값대로 건반의 높낮이를 제어하며 향후 개발될 인공지능 제어 알고리즘을 위해 신체 각부의 편안도를 조사하여 건반의 높낮이를 맞추었다. 또한, 건반 각부에 걸리는 최대 체압값과 체압비를 계산하여 인공지능에 의한 침대 편안도 제어를 위해 기초 데이터로 활용한다. 결과적으로 제시된 시스템은 향후 개발될 인공지능에 의한 신체의 안락함과 욕창 방지 제어를 위해 활용될 수 있는 토대가 될 수 있다.

• 한국감성과학회:학술대회논문집
• /
• 한국감성과학회 2011년도 추계학술대회
• /
• pp.94-95
• /
• 2011

• 대한인간공학회지
• /
• 제36권4호
• /
• pp.281-292
• /
• 2017

Objective: This study aims to identify important physical design variables in designing a necklace type wearable device, and to present design guidelines to maximize comfort that a user feels upon wearing the device. Background: Interests in fitness culture and personal health are on the rise recently. In such a situation, demand for necklace type wearable devices is projected to increase a lot, as the devices enable users to use their hands freely and to enjoy various contents through connection with mobile devices. However, the necklace type wearable device's comfort was assessed to have the lowest comfort in a running situation, where human body moves up and down and left and right more than other devices wearable on other human body parts. Therefore, the usability of a necklace type wearable device was low. In this regard, studies on identification of the variables affecting user comfort upon wearing a necklace type wearable device and on physical design direction maximizing comfort and usability are needed. Method: A pretest and a main test were carried out to draw the direction of necklace type wearable device design. In the pretest, wearing evaluation on the diverse types of devices released in the market was conducted to draw physical design variables of the devices affecting comfort. Furthermore, variables significantly affecting the comfort of a device were selected through an analysis of variance (ANOVA). In the main test, anthropometry was performed, and information on anthropometric items corresponding to the design variables selected in the pretest was acquired. Based on the pretest results and the anthropometric information in the main test, the present study produced design guidelines maximizing the comfort of a necklace type wearable device with regard to major design variables upon dynamic tasks. Results: According to the pretest results, the variables having effects on comfort were the angle of side points, width, and height. Due to interactions between variables, those need to be simultaneously considered upon designing a device. Upon dynamic tasks, the angle of side points and width of a device was designed to be smaller than mean angle of the trapezius muscle and neck width, and thus attachment to human body was high. As height was designed to be larger than mean neck front and rear point width, comfort was higher due to feeling of stability. Conclusion: Because user sensitivity to comfort was high at human body's inflection points, a device needs to be designed for users not to feel high pressure on specific body parts with the device fitting human body shape well. A design considering user's situation is also required in further studies.